01/713049 DC : DRAFT SEP 2001
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
PREN ISO 17662 - WELDING - CALIBRATION, VERIFICATION AND VALIDATION OF EQUIPMENT USED FOR WELDING, INCLUDING ANCILLARY ACTIVITIES
12-04-2005
23-11-2012
Foreword
1 Scope
2 Normative references
3 Terms and definitions
4 General requirements
4.1 General
4.2 Frequency
4.3 Requirements
4.4 Process data
4.5 Materials properties
5 Process data common to more than one welding process
5.1 Process data common to all welding processes
5.2 Requirements specific to several welding processes
5.3 Requirements specific to arc welding
6 Metal arc welding without gas protection (group 11)
7 Plasma arc welding (group 15)
8 Resistance welding (groups 21, 22, 23, 24 and 25)
9 Gas welding (group 3)
10 Friction welding (group 42)
11 Laser beam welding (group 52)
12 Electron beam welding (group 51)
13 Stud welding (group 78)
14 Brazing (group 91)
14.1 General
14.2 Manual flame brazing (group 912)
14.3 Mechanized flame brazing (group 912)
14.4 Induction brazing (group 916)
14.5 Resistance brazing (group 918)
14.6 Furnace brazing in protective atmosphere (group 913)
14.7 Vacuum brazing (group 924)
14.8 Furnace brazing in open atmosphere (group 913)
14.9 Dip brazing (group 914),salt-bath brazing (group 915)
and flux brazing (group 93)
14.10 Infrared brazing (group 911)
15 Preheat and/or post weld heat treatment
15.1 Preheat
15.2 Post weld heat treatment
16 Post weld cleaning
17 Flame cutting (group 81) and other ancillary processes
Annex A (informative) Details for stud welding
Annex B (informative) Acceptance testing of equipment
Annex C (informative) Parties involved
Bibliography
| Committee |
WEE/6
|
| DocumentType |
Draft
|
| PublisherName |
British Standards Institution
|
| Status |
Superseded
|
| SupersededBy |
| Standards | Relationship |
| PREN ISO 17662 : DRAFT 2001 | Identical |
| EN ISO 14744-5:2000 | Welding - Acceptance inspection of electron beam welding machines - Part 5: Measurement of run-out accuracy (ISO 14744-5:2000) |
| ISO 14555:2017 | Welding — Arc stud welding of metallic materials |
| EN 729-2 : 1994 | QUALITY REQUIREMENTS FOR WELDING - FUSION WELDING OF METALLIC MATERIALS - COMPREHENSIVE QUALITY REQUIREMENTS |
| ISO 14554-2:2013 | Quality requirements for welding — Resistance welding of metallic materials — Part 2: Elementary quality requirements |
| ISO 14744-5:2000 | Welding Acceptance inspection of electron beam welding machines Part 5: Measurement of run-out accuracy |
| EN 28206:1992 | Acceptance tests for oxygen cutting machines - Reproducible accuracy - Operational characteristics (ISO 8206:1991) |
| EN ISO 14744-3:2000 | Welding - Acceptance inspection of electron beam welding machines - Part 3: Measurement of beam current characteristics (ISO 14744-3:2000) |
| EN ISO 14744-6:2000 | Welding - Acceptance inspection of electron beam welding machines - Part 6: Measurement of stability of spot position (ISO 14744-6:2000) |
| ISO 8206:1991 | Acceptance tests for oxygen cutting machines — Reproducible accuracy — Operational characteristics |
| ISO 15620:2000 | Welding Friction welding of metallic materials |
| EN 1321:1996 | Destructive tests on welds in metallic materials - Macroscopic and microscopic examination of welds |
| EN ISO 15620:2000 | Welding - Friction welding of metallic materials (ISO 15620:2000) |
| ENV 50184 : 1996 | VALIDATION OF ARC WELDING EQUIPMENT |
| EN ISO 14744-4:2000 | Welding - Acceptance inspection of electron beam welding machines - Part 4: Measurement of welding speed (ISO 14744-4:2000) |
| EN ISO 14554-1:2013 | Quality requirements for welding - Resistance welding of metallic materials - Part 1: Comprehensive quality requirements (ISO 14554-1:2013) |
| ISO 14744-3:2000 | Welding Acceptance inspection of electron beam welding machines Part 3: Measurement of beam current characteristics |
| EN ISO 14744-2:2000 | Welding - Acceptance inspection of electron beam welding machines - Part 2: Measurement of accelerating voltage characteristics (ISO 14744-2:2000) |
| EN ISO 4063:2010 | Welding and allied processes - Nomenclature of processes and reference numbers (ISO 4063:2009, Corrected version 2010-03-01) |
| ISO 8402:1994 | Quality management and quality assurance — Vocabulary |
| ISO 14744-1:2008 | Welding — Acceptance inspection of electron beam welding machines — Part 1: Principles and acceptance conditions |
| ISO 14744-4:2000 | Welding Acceptance inspection of electron beam welding machines Part 4: Measurement of welding speed |
| EN ISO 14744-1:2008 | Welding - Acceptance inspection of electron beam welding machines - Part 1: Principles and acceptance conditions (ISO 14744-1:2008) |
| EN 562 : 2003 | GAS WELDING EQUIPMENT - PRESSURE GAUGES USED IN WELDING, CUTTING AND ALLIED PROCESSES |
| EN 729-1 : 1994 | QUALITY REQUIREMENTS FOR WELDING - FUSION WELDING OF METALLIC MATERIALS - GUIDELINES FOR SELECTION AND USE |
| ISO 9004:2009 | Managing for the sustained success of an organization A quality management approach |
| ISO 9001:2015 | Quality management systems — Requirements |
| ISO 669:2016 | Resistance welding Resistance welding equipment Mechanical and electrical requirements |
| EN 729-4 : 1994 | QUALITY REQUIREMENTS FOR WELDING - FUSION WELDING OF METALLIC MATERIALS - ELEMENTARY QUALITY REQUIREMENTS |
| EN 13134:2000 | Brazing - Procedure approval |
| ISO 14554-1:2013 | Quality requirements for welding — Resistance welding of metallic materials — Part 1: Comprehensive quality requirements |
| EN ISO 8402 : 1995 | QUALITY MANAGEMENT AND QUALITY ASSURANCE - VOCABULARY |
| EN ISO 14554-2:2013 | Quality requirements for welding - Resistance welding of metallic materials - Part 2: Elementary quality requirements (ISO 14554-2:2013) |
| ISO 14744-6:2000 | Welding Acceptance inspection of electron beam welding machines Part 6: Measurement of stability of spot position |
| ISO 14744-2:2000 | Welding Acceptance inspection of electron beam welding machines Part 2: Measurement of accelerating voltage characteristics |
| ISO 4063:2009 | Welding and allied processes — Nomenclature of processes and reference numbers |
| EN ISO 14555:2017 | Welding - Arc stud welding of metallic materials (ISO 14555:2017) |
| EN 970:1997 | Non-destructive examination of fusion welds - Visual examination |
| EN 729-3 : 1994 | QUALITY REQUIREMENTS FOR WELDING - FUSION WELDING OF METALLIC MATERIALS - STANDARD QUALITY REQUIREMENTS |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.