EN 1277:2003
|
Plastics piping systems - Thermoplastics piping systems for buried non-pressure applications - Test methods for leaktightness of elastomeric sealing ring type joints |
EN 295-3:2012
|
Vitrified clay pipe systems for drains and sewers - Part 3: Test methods |
ISO/TR 10358:1993
|
Plastics pipes and fittings Combined chemical-resistance classification table |
EN 681-1:1996/A3:2005
|
ELASTOMERIC SEALS - MATERIALS REQUIREMENTS FOR PIPE JOINT SEALS USED IN WATER AND DRAINAGE APPLICATIONS - PART 1: VULCANIZED RUBBER |
ISO 8773:2006
|
Plastics piping systems for non-pressure underground drainage and sewerage Polypropylene (PP) |
EN 1411:1996
|
Plastics piping and ducting systems - Thermoplastics pipes - Determination of resistance to external blows by the staircase method |
EN ISO 9967:2016
|
Thermoplastics pipes - Determination of creep ratio (ISO 9967:2016) |
ISO 265-1:1988
|
Pipes and fittings of plastics materials Fittings for domestic and industrial waste pipes Basic dimensions: Metric series Part 1: Unplasticized poly(vinyl chloride) (PVC-U) |
EN 1989 : 2000
|
THERMOPLASTICS PIPING SYSTEMS - JOINTS FOR BURIED NON-PRESSURE SEWERAGE APPLICATIONS - TEST METHOD FOR LONG-TERM SEALING PERFORMANCE OF JOINTS WITH THERMOPLASTIC ELASTOMER (TPE) SEALS BY ESTIMATING THE SEALING PRESSURE |
EN 1055:1996
|
Plastics piping systems - Thermoplastics piping systems for soil and waste discharge inside buildings - Test method for resistance to elevated temperature cycling |
ISO/TR 7620:2005
|
Rubber materials — Chemical resistance |
EN 743 : 1994
|
PLASTICS PIPING AND DUCTING SYSTEMS - THERMOPLASTICS PIPES - DETERMINATION OF THE LONGITUDINAL REVERSION |
EN 681-2:2000/A2:2005
|
ELASTOMERIC SEALS - MATERIALS REQUIREMENTS FOR PIPE JOINT SEALS USED IN WATER AND DRAINAGE APPLICATIONS - PART 2: THERMOPLASTIC ELASTOMERS |
EN 763 : 1994
|
PLASTICS PIPING AND DUCTING SYSTEMS - INJECTION MOULDED THERMOPLASTICS FITTINGS - TEST METHOD FOR VISUALLY ASSESSING EFFECTS OF HEATING |
EN 12061:1999
|
Plastics piping systems - Thermoplastics fittings - Test method for impact resistance |
ISO 11922-1:1997
|
Thermoplastics pipes for the conveyance of fluids — Dimensions and tolerances — Part 1: Metric series |
EN 476:2011
|
General requirements for components used in drains and sewers |
EN 921:1994/AC:1995
|
PLASTICS PIPING SYSTEMS - THERMOPLASTICS PIPES - DETERMINATION OF RESISTANCE TO INTERNAL PRESSURE AT CONSTANT TEMPERATURE |
ISO 472:2013
|
Plastics Vocabulary |
EN ISO 9969:2016
|
Thermoplastics pipes - Determination of ring stiffness (ISO 9969:2016) |
EN 744:1995
|
Plastics piping and ducting systems - Thermoplastics pipes - Test method for resistance to external blows by the round-the-clock method |
EN 1401-1:2009
|
Plastics piping systems for non-pressure underground drainage and sewerage - Unplasticized poly(vinyl chloride) (PVC-U) - Part 1: Specifications for pipes, fittings and the system |
PREN ISO 3126 : DRAFT 1999
|
PLASTICS PIPING SYSTEMS - PLASTICS PIPING COMPONENTS - MEASUREMENT AND DETERMINATION OF DIMENSIONS |
ISO 4065:1996
|
Thermoplastics pipes Universal wall thickness table |
ISO 13967:2009
|
Thermoplastics fittings Determination of ring stiffness |
EN ISO 1133:2005
|
PLASTICS - DETERMINATION OF THE MELT MASS-FLOW RATE (MFR) AND THE MELT VOLUME-FLOW RATE (MVR) OF THE THERMOPLASTICS |
ISO 1043-1:2011
|
Plastics — Symbols and abbreviated terms — Part 1: Basic polymers and their special characteristics |
EN 1437:2002
|
Plastics piping systems - Piping systems for underground drainage and sewerage - Test method for resistance to combined temperature cycling and external loading |
EN 12256:1998
|
Plastics piping systems - Thermoplastics fittings - Test method for mechanical strength or flexibility of fabricated fittings |