IEC 60243-1:2013
|
Electric strength of insulating materials - Test methods - Part 1: Tests at power frequencies |
ASTM D 3418 : 2015 : REDLINE
|
Standard Test Method for Transition Temperatures and Enthalpies of Fusion and Crystallization of Polymers by Differential Scanning Calorimetry |
ASTM D 3307 : 2016 : REDLINE
|
Standard Specification for Perfluoroalkoxy (PFA) Resin Molding and Extrusion Materials |
ASTM D 1894 : 2014 : REDLINE
|
Standard Test Method for Static and Kinetic Coefficients of Friction of Plastic Film and Sheeting |
ISO 12086-1:2006
|
Plastics Fluoropolymer dispersions and moulding and extrusion materials Part 1: Designation system and basis for specifications |
ISO 293:2004
|
Plastics — Compression moulding of test specimens of thermoplastic materials |
IEC 60250:1969
|
Recommended methods for the determination of the permittivity and dielectric dissipation factor of electrical insulating materials at power, audio and radio frequencies including metre wavelengths |
EN ISO 1043-1:2011/A1:2016
|
PLASTICS - SYMBOLS AND ABBREVIATED TERMS - PART 1: BASIC POLYMER AND THEIR SPECIAL CHARACTERISTICS (ISO 1043-1:2011/AMD 1:2016) |
ASTM D 1430 : 2017 : REDLINE
|
Standard Classification System for Polychlorotrifluoroethylene (PCTFE) Plastics |
EN ISO 1043-2:2011
|
Plastics - Symbols and abbreviated terms - Part 2: Fillers and reinforcing materials (ISO 1043-2:2011) |
ASTM D 2116 : 2016 : REDLINE
|
Standard Specification for FEP Resin Molding and Extrusion Materials |
EN ISO 527-2:2012
|
Plastics - Determination of tensile properties - Part 2: Test conditions for moulding and extrusion plastics (ISO 527-2:2012) |
ASTM D 3159 : 2015 : REDLINE
|
Standard Specification for Modified ETFE Fluoropolymer Molding and Extrusion Materials |
ISO 565:1990
|
Test sieves — Metal wire cloth, perforated metal plate and electroformed sheet — Nominal sizes of openings |
ASTM D 1238 : 2013 : REDLINE
|
Standard Test Method for Melt Flow Rates of Thermoplastics by Extrusion Plastometer |
EN ISO 527-1:2012
|
Plastics - Determination of tensile properties - Part 1: General principles (ISO 527-1:2012) |
ISO 75-2:2013
|
Plastics — Determination of temperature of deflection under load — Part 2: Plastics and ebonite |
ASTM D 4441 : 2015 : REDLINE
|
Standard Specification for Aqueous Dispersions of Polytetrafluoroethylene |
EN ISO 12086-1:2006/AC:2007
|
PLASTICS - FLUOROPOLYMER DISPERSIONS AND MOULDING AND EXTRUSION MATERIALS - PART 1: DESIGNATION SYSTEM AND BASIS FOR SPECIFICATIONS |
ISO 527-2:2012
|
Plastics — Determination of tensile properties — Part 2: Test conditions for moulding and extrusion plastics |
ISO 12000:2014
|
Plastics/rubber — Polymer dispersions and rubber latices (natural and synthetic) — Definitions and review of test methods |
ISO 11357-3:2011
|
Plastics Differential scanning calorimetry (DSC) Part 3: Determination of temperature and enthalpy of melting and crystallization |
EN ISO 293:2005
|
Plastics - Compression moulding of test specimens of thermoplastic materials (ISO 293:2004) |
ISO 11357-2:2013
|
Plastics Differential scanning calorimetry (DSC) Part 2: Determination of glass transition temperature and glass transition step height |
ISO 8962:1987
|
Plastics Polymer dispersions Determination of density |
EN ISO 75-2:2013
|
Plastics - Determination of temperature of deflection under load - Part 2: Plastics and ebonite (ISO 75-2:2013) |
ISO 1183:1987
|
Plastics Methods for determining the density and relative density of non-cellular plastics |
IEC 60093:1980
|
Methods of test for volume resistivity and surface resistivity of solid electrical insulating materials |
ISO 472:2013
|
Plastics Vocabulary |
ISO 180:2000
|
Plastics Determination of Izod impact strength |
ASTM D 790 : 2017 : REDLINE
|
Standard Test Methods for Flexural Properties of Unreinforced and Reinforced Plastics and Electrical Insulating Materials |
ISO 291:2008
|
Plastics Standard atmospheres for conditioning and testing |
ISO 4589:1984
|
Plastics Determination of flammability by oxygen index |
EN ISO 291:2008
|
Plastics - Standard atmospheres for conditioning and testing (ISO 291:2008) |
ISO 179:1993
|
Plastics Determination of Charpy impact strength |
EN ISO 1133:2005
|
PLASTICS - DETERMINATION OF THE MELT MASS-FLOW RATE (MFR) AND THE MELT VOLUME-FLOW RATE (MVR) OF THE THERMOPLASTICS |
ISO 1043-2:2011
|
Plastics — Symbols and abbreviated terms — Part 2: Fillers and reinforcing materials |
ISO 527-3:1995
|
Plastics Determination of tensile properties Part 3: Test conditions for films and sheets |
ISO 976:2013
|
Rubber and plastics — Polymer dispersions and rubber latices — Determination of pH |
ASTM D 4438 : 2013
|
Standard Test Method for Particle Size Distribution of Catalysts and Catalyst Carriers by Electronic Counting |
ISO 178:2010
|
Plastics Determination of flexural properties |
ISO 1043-1:2011
|
Plastics — Symbols and abbreviated terms — Part 1: Basic polymers and their special characteristics |
EN ISO 527-3:1995/AC:2002
|
PLASTICS - DETERMINATION OF TENSILE PROPERTIES - PART 3: TEST CONDITIONS FOR FILMS AND SHEETS |
ISO 13320-1:1999
|
Particle size analysis Laser diffraction methods Part 1: General principles |
ISO 1133:2005
|
Plastics Determination of the melt mass-flow rate (MFR) and the melt volume-flow rate (MVR) of thermoplastics |
ISO 4576:1996
|
Plastics — Polymer dispersions — Determination of sieve residue (gross particle and coagulum content) |
EN ISO 472:2013
|
Plastics - Vocabulary (ISO 472:2013) |
ASTM D 638 : 2014 : REDLINE
|
Standard Test Method for Tensile Properties of Plastics |
ASTM D 746 : 2014 : REDLINE
|
Standard Test Method for Brittleness Temperature of Plastics and Elastomers by Impact |
ASTM D 3892 : 2015 : REDLINE
|
PRACTICE FOR PACKAGING/PACKING OF PLASTICS |
ISO 527-1:2012
|
Plastics Determination of tensile properties Part 1: General principles |