04/30107378 DC : DRAFT JUL 2004
Withdrawn
A Withdrawn Standard is one, which is removed from sale, and its unique number can no longer be used. The Standard can be withdrawn and not replaced, or it can be withdrawn and replaced by a Standard with a different number.
EN 12184 - ELECTRICALLY POWERED WHEELCHAIRS, SCOOTERS AND THEIR CHARGERS - REQUIREMENTS AND TEST METHODS
23-07-2013
23-11-2012
Foreword
Introduction
Electrically powered wheelchairs, scooters and their chargers
- Requirements and test methods
1 Scope
2 Normative references
3 Terms and definitions
4 Test apparatus
5 Type classes
6 General requirements
7 Design requirements
8 Performance requirements
9 Electrical requirements
10 Information supplied by the manufacturer
11 Test report
Annex A (informative) Recommendations for dimensions and
manoeuvring area of electrically powered wheelchairs
A.1.1 Dimensions when ready for use
A.1.2 Push handle height
A.1.3 Ground clearance
A.2.1 Turning radius
A.2.2 Turn-around width
Annex B (informative) Recommended design features
B.1.2 Anti-tip devices
B.2.2 Component weight
B.2.3 Fittings and tools
B.2.4 Tyres
B.2.5 Means to inflate tyres
B.2.6 Surface temperature
B.2.7 Recommendations related to the user transferring
into or out of the wheelchair
B.2.8 Resistance to contamination from urine incontinence
B.2.9 Indication for maximum safe slope
B.2.10 Mirrors
B.2.11 Head support
B.2.12 Activation of running brakes
B.2.13 Accidental operation of parking brakes or freewheel
B.3.1 Mechanical damage of electronic units
B.3.2 Indication of electrical faults
B.3.3 Single fault protection
B.3.4 Batteries and their containers
B.3.5 Lighting
B.3.6 Control mechanism feedback
B.3.7 Freewheel alarm
B.3.8 Maximum speed
Annex C (informative) Recommended seating design
Annex D (informative) Manoeuvring
Annex ZA (informative) Relationship between this European
Standard and the Essential Requirements
of Council directive 93/42/EEC of
14 June 1993 concerning medical devices
EN 12184
Committee |
CH/173/1
|
DocumentType |
Draft
|
PublisherName |
British Standards Institution
|
Status |
Withdrawn
|
Standards | Relationship |
PREN 12184 : DRAFT 2011 | Identical |
ISO 7176-10:2008 | Wheelchairs — Part 10: Determination of obstacle-climbing ability of electrically powered wheelchairs |
ISO 10542-1:2012 | Technical systems and aids for disabled or handicapped persons — Wheelchair tiedown and occupant-restraint systems — Part 1: Requirements and test methods for all systems |
ISO 7176-2:2017 | Wheelchairs — Part 2: Determination of dynamic stability of electrically powered wheelchairs |
IEC 60601-1:2005+AMD1:2012 CSV | Medical electrical equipment - Part 1: General requirements for basic safety and essential performance |
ISO 7176-15:1996 | Wheelchairs — Part 15: Requirements for information disclosure, documentation and labelling |
EN 1021-1:2014 | FURNITURE - ASSESSMENT OF THE IGNITABILITY OF UPHOLSTERED FURNITURE - PART 1: IGNITION SOURCE SMOULDERING CIGARETTE |
ISO 7176-1:2014 | Wheelchairs Part 1: Determination of static stability |
ISO 7176-22:2014 | Wheelchairs Part 22: Set-up procedures |
IEC 61942:1997 | Live working - Gloves and mitts with mechanical protection |
EN 12182:2012 | Assistive products for persons with disability - General requirements and test methods |
ISO 7176-3:2012 | Wheelchairs — Part 3: Determination of effectiveness of brakes |
ISO 7176-7:1998 | Wheelchairs — Part 7: Measurement of seating and wheel dimensions |
ISO 7176-5:2008 | Wheelchairs — Part 5: Determination of dimensions, mass and manoeuvring space |
ISO 68-1:1998 | ISO general purpose screw threads — Basic profile — Part 1: Metric screw threads |
ISO 7176-13:1989 | Wheelchairs — Part 13: Determination of coefficient of friction of test surfaces |
IEC 60529:1989+AMD1:1999+AMD2:2013 CSV | Degrees of protection provided by enclosures (IP Code) |
ISO 7176-8:2014 | Wheelchairs Part 8: Requirements and test methods for static, impact and fatigue strengths |
ISO 7176-21:2009 | Wheelchairs Part 21: Requirements and test methods for electromagnetic compatibility of electrically powered wheelchairs and scooters, and battery chargers |
ISO 7176-19:2008 | Wheelchairs Part 19: Wheeled mobility devices for use as seats in motor vehicles |
EN ISO 14971:2012 | Medical devices - Application of risk management to medical devices (ISO 14971:2007, Corrected version 2007-10-01) |
ISO 7176-11:2012 | Wheelchairs — Part 11: Test dummies |
EN 1021-2:2014 | Furniture - Assessment of the ignitability of upholstered furniture - Part 2: Ignition source match flame equivalent |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.