|
PREN 717-1 : DRAFT 2002
|
WOOD-BASED PANELS - DETERMINATION OF FORMALDEHYDE RELEASE - PART 1: FORMALDEHYDE EMISSION BY THE CHAMBER METHOD |
|
EN 326-3:2003
|
Wood-based panels - Sampling, cutting and inspection - Part 3: Inspection of an isolated lot of panels |
|
EN 717-2:1994/AC:2002
|
WOOD-BASED PANELS - DETERMINATION OF FORMALDEHYDE RELEASE - PART 2: FORMALDEHYDE RELEASE BY THE GAS ANALYSIS METHOD |
|
EN 321:2001
|
Wood-based panels - Determination of moisture resistance under cyclic test conditions |
|
EN 319:1993
|
Particleboards and fibreboards - Determination of tensile strength perpendicular to the plane of the board |
|
EN 120:1992
|
Wood based panels - Determination of formaldehyde content - Extraction method called the perforator method |
|
EN 13986:2004
|
Wood-based panels for use in construction - Characteristics, evaluation of conformity and marking |
|
EN 310:1993
|
Wood-based panels - Determination of modulus of elasticity in bending and of bending strength |
|
EN 1087-1:1995
|
Particleboards - Determination of moisture resistance - Part 1: Boil test |
|
EN 326-1:1994
|
Wood-based panels - Sampling, cutting and inspection - Part 1: Sampling and cutting of test pieces and expression of test results |
|
EN 322:1993
|
Wood-based panels - Determination of moisture content |
|
EN 326-2:2010+A1:2014
|
Wood-based panels - Sampling, cutting and inspection - Part 2: Initial type testing and factory production control |
|
EN 596:1995
|
Timber structures - Test methods - Soft body impact test of timber framed walls |
|
EN 324-1:1993
|
Wood-based panels - Determination of dimensions of boards - Part 1: Determination of thickness, width and length |
|
ENV 1156:1998
|
Wood-based panels - Determination of duration of load and creep factors |
|
EN 317:1993
|
Particleboards and fibreboards - Determination of swelling in thickness after immersion in water |
|
EN 1058:2009
|
Wood-based panels - Determination of characteristic 5-percentile values and characteristic mean values |
|
EN 1195:1997
|
Timber structures - Test methods - Performance of structural floor decking |
|
EN 789:2004
|
Timber structures - Test methods - Determination of mechanical properties of wood based panels |
|
EN 594:2011
|
Timber structures - Test methods - Racking strength and stiffness of timber frame wall panels |
|
EN 324-2:1993
|
Wood-based panels - Determination of dimensions of boards - Part 2: Determination of squareness and edge straightness |
|
EN 323:1993
|
Wood-based panels - Determination of density |
|
EN 320:2011
|
Particleboards and fibreboards - Determination of resistance to axial withdrawal of screws |
|
EN 12369-1:2001
|
Wood-based panels - Characteristic values for structural design - Part 1: OSB, particleboards and fibreboards |
|
EN 318:2002
|
Wood based panels - Determination of dimensional changes associated with changes in relative humidity |
|
EN 335-3:1995
|
Durability of wood and wood-based products - Definition of hazard classes of biological attack - Part 3: Application to wood-based panels |
|
EN 1128:1995
|
Cement-bonded particleboards - Determination of hard body impact resistance |
|
EN 12871:2013
|
Wood-based panels - Determination of performance characteristics for load bearing panels for use in floors, roofs and walls |