EN 1127-1:2011
|
Explosive atmospheres - Explosion prevention and protection - Part 1: Basic concepts and methodology |
IEC 60079-1:2014 RLV
|
Explosive atmospheres - Part 1: Equipment protection by flameproof enclosures "d" |
IEC 60364-5-54:2011
|
Low-voltage electrical installations - Part 5-54: Selection and erection of electrical equipment - Earthing arrangements and protective conductors |
EN 13766:2010
|
Thermoplastic multi-layer (non-vulcanized) hoses and hose assemblies for the transfer of liquid petroleum gas and liquefied natural gas - Specification |
ENV 1992-1-2 : DRAFT 95 COR 96
|
EUROCODE 2 - DESIGN OF CONCRETE STRUCTURES - GENERAL RULES - STRUCTURAL FIRE DESIGN |
IEC 60079-10:2002
|
Electrical apparatus for explosive gas atmospheres - Part 10: Classification of hazardous areas |
EN 1514-1:1997
|
Flanges and their joints - Dimensions of gaskets for PN-designated flanges - Part 1: Non-metallic flat gaskets with or without inserts |
IEC TS 60079-27:2002
|
Electrical apparatus for explosive gas atmospheres - Part 27: Fieldbus intrinsically safe concept (FISCO) |
EN 12162:2001+A1:2009
|
Liquid pumps - Safety requirements - Procedure for hydrostatic testing |
EN 12838:2000
|
Installations and equipment for liquefied natural gas - Suitability testing of LNG sampling systems |
ISO 15664:2001
|
Acoustics — Noise control design procedures for open plant |
NFPA 921 : 2017
|
GUIDE FOR FIRE AND EXPLOSION INVESTIGATIONS |
EN ISO 10456:2007/AC:2009
|
BUILDING MATERIALS AND PRODUCTS - HYGROTHERMAL PROPERTIES - TABULATED DESIGN VALUES AND PROCEDURES FOR DETERMINING DECLARED AND DESIGN THERMAL VALUES |
EN 61508-1:2010
|
Functional safety of electrical/electronic/programmable electronic safety-related systems - Part 1: General requirements |
EN 288-1:1992/A1:1997
|
SPECIFICATION AND QUALIFICATION OF WELDING PROCEDURES FOR METALLIC MATERIALS - GENERAL RULES FOR FUSION WELDING |
ENV 1998-5 : 1994
|
EUROCODE 8: DESIGN PROVISIONS FOR EARTHQUAKE RESISTANCE OF STRUCTURES - FOUNDATIONS, RETAINING STRUCTURES AND GEOTECHNICAL ASPECTS |
IEC 60502:1994
|
Extruded solid dielectric insulated power cables for rated voltages from 1 kV up to 30 kV |
IEC TR 60079-20:1996
|
Electrical apparatus for explosive gas atmospheres - Part 20: Data for flammable gases and vapours, relating to the use of electrical apparatus |
EN 288-3:1992/A1:1997
|
SPECIFICATION AND APPROVAL OF WELDING PROCEDURES FOR METALLIC MATERIALS - PART 3: WELDING PROCEDURE TESTS FOR THE ARC WELDING OF STEELS |
EN 50054:1998
|
Electrical apparatus for the detection and measurement of combustible gases - General requirements and test methods |
IEC 60079-19:2010+AMD1:2015 CSV
|
Explosive atmospheres - Part 19: Equipment repair, overhaul and reclamation |
EN ISO 1461:2009
|
Hot dip galvanized coatings on fabricated iron and steel articles - Specifications and test methods (ISO 1461:2009) |
EN 1474 : 1997
|
INSTALLATION AND EQUIPMENT FOR LIQUEFIED NATURAL GAS - DESIGN AND TESTING OF LOADING/UNLOADING ARMS |
IEC 60079-17:2013
|
Explosive atmospheres - Part 17: Electrical installations inspection and maintenance |
EN 12483:1999
|
Liquid pumps - Pump units with frequency inverters - Guarantee and compatibility tests |
EN 12065 : 1997
|
INSTALLATIONS AND EQUIPMENT FOR LIQUEFIED NATURAL GAS - TESTING OF FOAM CONCENTRATES DESIGNED FOR GENERATION OF MEDIUM AND HIGH EXPANSION FOAM AND OF EXTINGUISHING POWDERS USED ON LIQUEFIED NATURAL GAS FIRES |
EN 1714:1997/A2:2003
|
NON-DESTRUCTIVE TESTING OF WELDS - ULTRASONIC TESTING OF WELDED JOINTS |
EN 1594:2013
|
Gas infrastructure - Pipelines for maximum operating pressure over 16 bar - Functional requirements |
ENV 1991-2-2 : 1995
|
EUROCODE 1 - BASIS OF DESIGN AND ACTIONS ON STRUCTURES - ACTIONS ON STRUCTURES EXPOSED TO FIRE |
NFA 49 244 : 1993
|
STEEL TUBES - WELDED AUSTENITIC STAINLESS AND AUSTENITIC FERRITIC STEEL ROLLED TUBES FOR PRESSURE SERVICE - DIMENSIONS, TECHNICAL CONDITIONS FOR DELIVERY |
IEC 60079-18:2014 RLV
|
Explosive atmospheres - Part 18: Equipment protection by encapsulation “m” |
EN 823:2013
|
Thermal insulating products for building applications - Determination of thickness |
EN ISO 5199 : 2002
|
TECHNICAL SPECIFICATIONS FOR CENTRIFUGAL PUMPS - CLASS 2 |
EN ISO 9002:1994/AC:1997
|
QUALITY SYSTEMS - SPECIFICATION FOR PRODUCTION AND INSTALLATION |
EN 1050 : 1996
|
SAFETY OF MACHINERY - PRINCIPLES FOR RISK ASSESSMENT |
ENV 1994-1-2 : 94 AC 95
|
EUROCODE 4: DESIGN OF COMPOSITE STEEL AND CONCRETE STRUCTURES - GENERAL RULES - STRUCTURAL FIRE DESIGN |
EN 13645:2001
|
Installations and equipment for liquefied natural gas - Design of onshore installations with a storage capacity between 5 t and 200 t |
EN 473:2008
|
Non-destructive testing - Qualification and certification of NDT personnel - General principles |
IEC TR 60079-16:1990
|
Electrical apparatus for explosive gas atmospheres. Part 16: Artificial ventilation for the protection of analyser(s) houses |
IEC 60079-5:2015 RLV
|
Explosive atmospheres - Part 5: Equipment protection by powder filling "q" |
ENV 1994-1-1 : 1992
|
EUROCODE 4 - DESIGN OF COMPOSITE STEEL AND CONCRETE STRUCTURES - GENERAL RULES FOR BUILDINGS |
EN 50057:1998
|
Electrical apparatus for the detection and measurement of combustible gases - Performance requirements for Group II apparatus indicating up to 100 % lower explosive limit |
NFC 17 100 : 1997
|
PROTECTION OF STRUCTURES AGAINST LIGHTNING - INSTALLATION OF LIGHTNING PROTECTIVE SYSTEM |
EN 288-2:1992/A1:1997
|
SPECIFICATION AND APPROVAL OF WELDING PROCEDURES FOR METALLIC MATERIALS - PART 2: WELDING PROCEDURE SPECIFICATION FOR ARC WELDING |
IEC 60079-11:2011
|
Explosive atmospheres - Part 11: Equipment protection by intrinsic safety "i" |
EN ISO 1460 : 1994
|
METALLIC COATINGS - HOT DIP GALVANIZED COATINGS ON FERROUS MATERIALS - GRAVIMETRIC DETERMINATION OF THE MASS PER UNIT AREA |
EN ISO 9001:2015
|
Quality management systems - Requirements (ISO 9001:2015) |
EN 809 : 1998 COR 2010
|
PUMPS AND PUMP UNITS FOR LIQUIDS - COMMON SAFETY REQUIREMENTS |
EN 12308 : 1998
|
INSTALLATIONS AND EQUIPMENT FOR LNG - SUITABILITY TESTING OF GASKETS DESIGNED FOR FLANGED JOINTS USED ON LNG PIPING |
IEC 60079-25:2010
|
Explosive atmospheres - Part 25: Intrinsically safe electrical systems |
IEC 60079-6:2015
|
Explosive atmospheres - Part 6: Equipment protection by liquid immersion "o" |
ENV 1998-1-2 : 1994
|
EUROCODE 8: DESIGN PROVISIONS FOR EARTHQUAKE RESISTANCE OF STRUCTURES - GENERAL RULES - GENERAL RULES FOR BUILDINGS |
IEC 60079-0:2011
|
Explosive atmospheres - Part 0: Equipment - General requirements |
EN 1160 : 1996
|
INSTALLATIONS AND EQUIPMENT FOR LIQUEFIED NATURAL GAS - GENERAL CHARACTERISTICS OF LIQUEFIED NATURAL GAS |
EN 10204:2004
|
Metallic products - Types of inspection documents |
EN 60079-10:2003
|
Electrical apparatus for explosive gas atmospheres - Part 10: Classification of hazardous areas |
IEC 60079-14:2013
|
Explosive atmospheres - Part 14: Electrical installations design, selection and erection |
EN ISO 12241:2008
|
Thermal insulation for building equipment and industrial installations - Calculation rules (ISO 12241:2008) |
EN ISO 14001:2015
|
Environmental management systems - Requirements with guidance for use (ISO 14001:2015) |
EN ISO 9906:2012
|
Rotodynamic pumps - Hydraulic performance acceptance tests - Grades 1, 2 and 3 (ISO 9906:2012) |
EN 60079-14:2014/AC:2016
|
EXPLOSIVE ATMOSPHERES - PART 14: ELECTRICAL INSTALLATIONS DESIGN, SELECTION AND ERECTION (IEC 60079-14:2013/COR1:2016) |
ISO 13709:2009
|
Centrifugal pumps for petroleum, petrochemical and natural gas industries |
EN 1532 : 1997
|
INSTALLATION AND EQUIPMENT FOR LIQUEFIED NATURAL GAS - SHIP TO SHORE INTERFACE |
ENV 1998-1-1 : 1994
|
EUROCODE 8: DESIGN PROVISIONS FOR EARTHQUAKE RESISTANCE OF STRUCTURES - GENERAL RULES - SEISMIC ACTIONS AND GENERAL REQUIREMENTS FOR STRUCTURES |
EN 60529:1991/AC:2016-12
|
DEGREES OF PROTECTION PROVIDED BY ENCLOSURES (IP CODE) (IEC 60529 EDITION 2.2 CORRIGENDUM 2:2015) |
EN 12567:2000
|
Industrial valves - Isolating valves for LNG - Specification for suitability and appropriate verification tests |
ENV 1993-1-2 : DRAFT 95
|
EUROCODE 3 - DESIGN OF STEEL STRUCTURES - PART 1-2: GENERAL RULES - STRUCTURAL FIRE DESIGN |
ENV 1992-1-1 : DRAFT 91 COR 1992
|
EUROCODE 2: DESIGN OF CONCRETE STRUCTURES - GENERAL RULES AND RULES FOR BUILDINGS |
EN 571-1:1997
|
Non destructive testing - Penetrant testing - Part 1: General principles |
EN 970:1997
|
Non-destructive examination of fusion welds - Visual examination |
ENV 1993-1-1:1992/A2:1998
|
EUROCODE 3 - DESIGN OF STEEL STRUCTURES - GENERAL RULES AND RULES FOR BUILDINGS |
EN ISO 9000:2015
|
Quality management systems - Fundamentals and vocabulary (ISO 9000:2015) |
IEC 60079-15:2010
|
Explosive atmospheres - Part 15: Equipment protection by type of protection "n" |
IEC 60079-13:2017
|
Explosive atmospheres - Part 13: Equipment protection by pressurized room "p" and artificially ventilated room "v" |
IEC 60079-26:2014 RLV
|
Explosive atmospheres - Part 26: Equipment with Equipment Protection Level (EPL) Ga |
EN 1435:1997/A2:2003
|
NON-DESTRUCTIVE TESTING OF WELDS - RADIOGRAPHIC TESTING OF WELDED JOINTS |
EN 60034-5:2001/A1:2007
|
ROTATING ELECTRICAL MACHINES - PART 5: DEGREES OF PROTECTION PROVIDED BY THE INTEGRAL DESIGN OF ROTATING ELECTRICAL MACHINES (IP CODE) - CLASSIFICATION |
NFC 15 100 : 2002 AMD 5 2015
|
LOW-VOLTAGE ELECTRICAL INSTALLATIONS |
EN 1776:2015
|
Gas infrastructure - Gas measuring systems - Functional requirements |
EN 287-1:2011
|
Qualification test of welders - Fusion welding - Part 1: Steels |
EN 12066 : 1997
|
INSTALLATIONS AND EQUIPMENT FOR LIQUEFIED NATURAL GAS - TESTING OF INSULATING LININGS FOR LIQUEFIED NATURAL GAS IMPOUNDING AREAS |