EN 10269:2013
|
Steels and nickel alloys for fasteners with specified elevated and/or low temperature properties |
EN 1514-1:1997
|
Flanges and their joints - Dimensions of gaskets for PN-designated flanges - Part 1: Non-metallic flat gaskets with or without inserts |
EN 12560-6:2003
|
Flanges and their joints - Gaskets for Class-designated flanges - Part 6: Covered serrated metal gaskets for use with steel flanges |
EN 12560-1:2001
|
Flanges and their joints - Gaskets for Class-designated flanges - Part 1: Non-metallic flat gaskets with or without inserts |
EN 12560-3:2001
|
Flanges and their joints - Gaskets for Class-designated flanges - Part 3: Non-metallic PTFE envelope gaskets |
EN 61508-1:2010
|
Functional safety of electrical/electronic/programmable electronic safety-related systems - Part 1: General requirements |
EN 50039:1980
|
Electrical apparatus for potentially explosive atmospheres - Intrinsically safe electrical systems 'i' |
EN 12560-2:2013
|
Flanges and their joints - Dimensions of gaskets for Class-designated flanges - Part 2: Spiral wound gaskets for use with steel flanges |
IEC 61511-1:2016+AMD1:2017 CSV
|
Functional safety - Safety instrumented systems for the process industry sector - Part 1: Framework, definitions, system, hardware and application programming requirements |
EN 50020:2002
|
Electrical apparatus for potentially explosive atmospheres - Intrinsic safety 'i' |
EN ISO 1461:2009
|
Hot dip galvanized coatings on fabricated iron and steel articles - Specifications and test methods (ISO 1461:2009) |
EN 1714:1997/A2:2003
|
NON-DESTRUCTIVE TESTING OF WELDS - ULTRASONIC TESTING OF WELDED JOINTS |
EN 12560-4:2001
|
Flanges and their joints - Gaskets for Class-designated flantes - Part 4: Corrugated, flat or grooved metallic and filled metallic gaskets for use with steel flanges |
EN 13463-1:2009
|
Non-electrical equipment for use in potentially explosive atmospheres - Part 1: Basic method and requirements |
EN 10088-3:2014
|
Stainless steels - Part 3: Technical delivery conditions for semi-finished products, bars, rods, wire, sections and bright products of corrosion resisting steels for general purposes |
IEC 61508-5:2010
|
Functional safety of electrical/electronic/programmable electronic safety-related systems - Part 5: Examples of methods for the determination of safety integrity levels (see Functional Safety and IEC 61508) |
EN 12266-2:2012
|
Industrial valves - Testing of metallic valves - Part 2: Tests, test procedures and acceptance criteria - Supplementary requirements |
ISO 1461:2009
|
Hot dip galvanized coatings on fabricated iron and steel articles — Specifications and test methods |
IEC 61508-4:2010
|
Functional safety of electrical/electronic/programmable electronic safety-related systems - Part 4: Definitions and abbreviations (see Functional Safety and IEC 61508) |
EN ISO 9002:1994/AC:1997
|
QUALITY SYSTEMS - SPECIFICATION FOR PRODUCTION AND INSTALLATION |
IEC 61508-3:2010
|
Functional safety of electrical/electronic/programmable electronic safety-related systems - Part 3: Software requirements (see Functional Safety and IEC 61508) |
EN 50017:1998
|
Electrical apparatus for potentially explosive atmospheres - Powder filling "q" |
EN 50019:2000/corrigendum Apr. 2003
|
ELECTRICAL APPARATUS FOR POTENTIALLY EXPLOSIVE ATMOSPHERES - INCREASED SAFETY "E" |
EN 10088-2:2014
|
STAINLESS STEELS - PART 2: TECHNICAL DELIVERY CONDITIONS FOR SHEET/PLATE AND STRIP OF CORROSION RESISTING STEELS FOR GENERAL PURPOSES |
EN 50018 : 2000 AMD 1 2002
|
ELECTRICAL APPARATUS FOR POTENTIALLY EXPLOSIVE ATMOSPHERES - FLAMEPROOF ENCLOSURE "D" |
EN 473:2008
|
Non-destructive testing - Qualification and certification of NDT personnel - General principles |
EN 1473:2016
|
Installation and equipment for liquefied natural gas - Design of onshore installations |
EN 910 : 1996
|
DESTRUCTIVE TESTS ON WELDS IN METALLIC MATERIALS - BEND TESTS |
PREN 12516-2 : DRAFT 2011
|
INDUSTRIAL VALVES - SHELL DESIGN STRENGTH - PART 2: CALCULATION METHOD FOR STEEL VALVE SHELLS |
EN 12266-1:2012
|
Industrial valves - Testing of metallic valves - Part 1: Pressure tests, test procedures and acceptance criteria - Mandatory requirements |
EN 13208:2003+A1:2010
|
Food processing machinery - Vegetable peelers - Safety and hygiene requirements |
EN 13463-8:2003
|
Non-electrical equipment for potentially explosive atmospheres - Part 8: Protection by liquid immersion 'k' |
EN ISO 1460 : 1994
|
METALLIC COATINGS - HOT DIP GALVANIZED COATINGS ON FERROUS MATERIALS - GRAVIMETRIC DETERMINATION OF THE MASS PER UNIT AREA |
IEC 61511-3:2016
|
Functional safety - Safety instrumented systems for the process industry sector - Part 3: Guidance for the determination of the required safety integrity levels |
EN ISO 9001:2015
|
Quality management systems - Requirements (ISO 9001:2015) |
EN 875:1995
|
Destructive tests on welds in metallic materials - Impact tests - Test specimen location, notch orientation and examination |
EN 12516-3:2002/AC:2003
|
VALVES - SHELL DESIGN STRENGTH - PART 3: EXPERIMENTAL METHOD |
EN 13463-2:2004
|
Non-electrical equipment for use in potentially explosive atmospheres - Part 2: Protection by flow restricting enclosure 'fr' |
IEC 61511-2:2016
|
Functional safety - Safety instrumented systems for the process industry sector - Part 2: Guidelines for the application of IEC 61511-1:2016 |
EN 1160 : 1996
|
INSTALLATIONS AND EQUIPMENT FOR LIQUEFIED NATURAL GAS - GENERAL CHARACTERISTICS OF LIQUEFIED NATURAL GAS |
EN 10204:2004
|
Metallic products - Types of inspection documents |
EN 60079-10:2003
|
Electrical apparatus for explosive gas atmospheres - Part 10: Classification of hazardous areas |
EN 1532 : 1997
|
INSTALLATION AND EQUIPMENT FOR LIQUEFIED NATURAL GAS - SHIP TO SHORE INTERFACE |
ISO 10497:2010
|
Testing of valves — Fire type-testing requirements |
IEC 61508-6:2010
|
Functional safety of electrical/electronic/programmable electronic safety-related systems - Part 6: Guidelines on the application of IEC 61508-2 and IEC 61508-3 (see Functional Safety and IEC 61508) |
EN 50015:1998
|
Electrical apparatus for potentially explosive atmospheres - Oil immersion "o" |
EN 13463-5:2011
|
Non-electrical equipment intended for use in potentially explosive atmospheres - Part 5: Protection by constructional safety 'c' |
IEC 61508-1:2010
|
Functional safety of electrical/electronic/programmable electronic safety-related systems - Part 1: General requirements (see Functional Safety and IEC 61508) |
EN 60529:1991/AC:2016-12
|
DEGREES OF PROTECTION PROVIDED BY ENCLOSURES (IP CODE) (IEC 60529 EDITION 2.2 CORRIGENDUM 2:2015) |
EN 12560-5:2001
|
Flanges and their joints - Gaskets for Class-designated flanes - Part 5: Metallic ring joint gaskets for use with steel flanges |
EN 12567:2000
|
Industrial valves - Isolating valves for LNG - Specification for suitability and appropriate verification tests |
EN 50016:2002
|
Electrical apparatus for potentially explosive atmospheres - Pressurized apparatus "p" |
IEC 61508-7:2010
|
Functional safety of electrical/electronic/programmable electronic safety-related systems - Part 7: Overview of techniques and measures (see Functional Safety and IEC 61508) |
PREN 12516-4 : DRAFT 2011
|
INDUSTRIAL VALVES - SHELL DESIGN STRENGTH - PART 4: CALCULATION METHOD FOR VALVE SHELLS MANUFACTURED IN METALLIC MATERIALS OTHER THAN STEEL |
EN 571-1:1997
|
Non destructive testing - Penetrant testing - Part 1: General principles |
EN 50028:1987
|
Electrical apparatus for potentially explosive atmospheres - Encapsulation 'm' |
EN 50014:1997/A2:1999
|
ELECTRICAL APPARATUS FOR POTENTIALLY EXPLOSIVE ATMOSPHERES - GENERAL REQUIREMENTS |
IEC 61508-2:2010
|
Functional safety of electrical/electronic/programmable electronic safety-related systems - Part 2: Requirements for electrical/electronic/programmable electronic safety-related systems (see Functional Safety and IEC 61508) |
EN ISO 9000:2015
|
Quality management systems - Fundamentals and vocabulary (ISO 9000:2015) |
EN 1435:1997/A2:2003
|
NON-DESTRUCTIVE TESTING OF WELDS - RADIOGRAPHIC TESTING OF WELDED JOINTS |
EN 60034-5:2001/A1:2007
|
ROTATING ELECTRICAL MACHINES - PART 5: DEGREES OF PROTECTION PROVIDED BY THE INTEGRAL DESIGN OF ROTATING ELECTRICAL MACHINES (IP CODE) - CLASSIFICATION |
EN 1776:2015
|
Gas infrastructure - Gas measuring systems - Functional requirements |
PREN 12516-1 : DRAFT 2011
|
INDUSTRIAL VALVES - SHELL DESIGN STRENGTH - PART 1: TABULATION METHOD FOR STEEL VALVE SHELLS |
EN 287-1:2011
|
Qualification test of welders - Fusion welding - Part 1: Steels |