EN 60286-6:2004
|
PACKAGING OF COMPONENTS FOR AUTOMATIC HANDLING - PART 6: BULK CASE PACKAGING FOR SURFACE MOUNTING COMPONENTS |
IEC 60068-2-58:2015+AMD1:2017 CSV
|
Environmental testing - Part 2-58: Tests - Test Td: Test methods for solderability, resistance to dissolution of metallization and to soldering heat of surface mounting devices (SMD) |
CECC 240001 : 1996
|
FIXED LOW POWER FILM RESISTORS (LEADED/UNLEADED) |
EN 60068-2-1:2007
|
ENVIRONMENTAL TESTING - PART 2-1: TESTS - TEST A: COLD |
IECQ 001002-3:2005
|
IEC QUALITY ASSESSMENT SYSTEM FOR ELECTRONIC COMPONENTS (IECQ) - RULES OF PROCEDURE - PART 3: APPROVAL PROCEDURES |
EN 60068-2-2:2007
|
ENVIRONMENTAL TESTING - PART 2-2: TESTS - TEST B: DRY HEAT |
IEC 60068-2-21:2006
|
Environmental testing - Part 2-21: Tests - Test U: Robustness of terminations and integral mounting devices |
IEC 60068-2-13:1983
|
Basic environmental testing procedures - Part 2-13: Tests - Test M: Low air pressure |
EN 61760-1:2006
|
SURFACE MOUNTING TECHNOLOGY - PART 1: STANDARD METHOD FOR THE SPECIFICATION OF SURFACE MOUNTING COMPONENTS (SMDS) |
IEC 60286-6:2004
|
Packaging of components for automatic handling - Part 6: Bulk case packaging for surface mounting components |
IEC 61760-1:2006
|
Surface mounting technology - Part 1: Standard method for the specification of surface mounting components (SMDs) |
EN 140401:2009
|
BLANK DETAIL SPECIFICATION: FIXED LOW POWER FILM SURFACE MOUNT (SMD) RESISTORS |
EN 140400:2003
|
SECTIONAL SPECIFICATION - FIXED LOW POWER SURFACE MOUNT (SMD) RESISTORS |
IEC 60410:1973
|
Sampling plans and procedures for inspection by attributes |
EN 60286-3:2013/AC:2013
|
PACKAGING OF COMPONENTS FOR AUTOMATIC HANDLING - PART 3: PACKAGING OF SURFACE MOUNT COMPONENTS ON CONTINUOUS TAPES (IEC 60286-3:2013) |
EN 60068-2-21:2006
|
ENVIRONMENTAL TESTING - PART 2-21: TESTS - TEST U: ROBUSTNESS OF TERMINATIONS AND INTEGRAL MOUNTING DEVICES |
IEC 60068-2-2:2007
|
Environmental testing - Part 2-2: Tests - Test B: Dry heat |
EN 60115-1:2011/A11:2015
|
FIXED RESISTORS FOR USE IN ELECTRONIC EQUIPMENT - PART 1: GENERIC SPECIFICATION |
IEC TR 60440:1973
|
Method of measurement of non-linearity in resistors |
EN 61340-3-1:2007
|
Electrostatics - Part 3-1: Methods for simulation of electrostatic effects - Human body model (HBM) electrostatic discharge test waveforms |
IEC 60062:2016
|
Marking codes for resistors and capacitors |
IEC 60068-2-2a:1976
|
Supplement A - Basic environmental testing procedures - Part 2: Tests - Tests B: Dry heat |
EN 60062:2016/AC:2016-12
|
MARKING CODES FOR RESISTORS AND CAPACITORS (IEC 60062:2016/COR1:2016) |
IEC 61340-3-1:2006
|
Electrostatics - Part 3-1: Methods for simulation of electrostatic effects - Human body model (HBM) electrostatic discharge test waveforms |
EN 60068-2-78:2013
|
ENVIRONMENTAL TESTING - PART 2-78: TESTS - TEST CAB: DAMP HEAT, STEADY STATE (IEC 60068-2-78:2012) |
EN 60068-2-13 : 1999
|
ENVIRONMENTAL TESTING - PART 2: TESTS - TEST M: LOW AIR PRESSURE |
EN 60068-2-6:2008
|
ENVIRONMENTAL TESTING - PART 2-6: TESTS - TEST FC: VIBRATION (SINUSOIDAL) |
IEC 60063:2015
|
Preferred number series for resistors and capacitors |
IEC 60286-3:2013
|
Packaging of components for automatic handling - Part 3: Packaging of surface mount components on continuous tapes |
IEC 60068-2-1:2007
|
Environmental testing - Part 2-1: Tests - Test A: Cold |
EN 60068-2-30:2005
|
ENVIRONMENTAL TESTING - PART 2-30: TESTS - TEST DB: DAMP HEAT, CYCLIC (12 H + 12 H CYCLE) |
EN 60695-11-5:2017
|
FIRE HAZARD TESTING - PART 11-5: TEST FLAMES - NEEDLE-FLAME TEST METHOD - APPARATUS, CONFIRMATORY TEST ARRANGEMENT AND GUIDANCE (IEC 60695-11-5:2016) |
IEC 60695-11-5 : 2.0
|
FIRE HAZARD TESTING - PART 11-5: TEST FLAMES - NEEDLE-FLAME TEST METHOD - APPARATUS, CONFIRMATORY TEST ARRANGEMENT AND GUIDANCE |
IEC 60068-2-14:2009
|
Environmental testing - Part 2-14: Tests - Test N: Change of temperature |
EN 60068-2-45:1992/A1:1993
|
Environmental testing - Part 2: Tests - Test Xa and guidance: Immersion in cleaning solvents |
EN 60068-2-14:2009
|
ENVIRONMENTAL TESTING - PART 2-14: TESTS - TEST N: CHANGE OF TEMPERATURE |
IEC 60115-1:2008
|
Fixed resistors for use in electronic equipment - Part 1: Generic specification |
IEC 60195:2016
|
Method of measurement of current noise generated in fixed resistors |
IEC 60068-2-30:2005
|
Environmental testing - Part 2-30: Tests - Test Db: Damp heat, cyclic (12 h + 12 h cycle) |