09/30196508 DC : 0
Current
The latest, up-to-date edition.
BS ISO 9328-1 - STEEL FLAT PRODUCTS FOR PRESSURE PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 1: GENERAL REQUIREMENTS
Hardcopy , PDF
English
Foreword
1 Scope
2 Normative references
3 Terms and definitions
4 Classification and designation
4.1 Classification
4.2 Designation
5 Information to be supplied by the purchaser
5.1 Mandatory information
5.2 Options
6 Requirements
6.1 Steelmaking process
6.2 Delivery condition
6.3 Chemical composition
6.3.1 Cast analysis
6.3.2 Product analysis
6.4 Mechanical properties
6.5 Surface condition
6.6 Internal soundness
6.7 Dimensions and tolerances on dimensions
6.8 Calculation of mass
7 Inspection
7.1 Types of inspection and inspection documents
7.2 Tests to be carried out
7.3 Retests
8 Sampling
8.1 Frequency of testing
8.2 Selection and preparation of samples and test pieces
8.2.1 Sampling and sample preparation
8.2.2 Preparation of test pieces
9 Test methods
9.1 Chemical analysis
9.2 Tensile test at room temperature
9.3 Tensile test at elevated temperature
9.4 Impact test
9.5 Other testing
10 Marking
Committee |
ISE/73
|
DocumentType |
Draft
|
Pages |
21
|
PublisherName |
British Standards Institution
|
Status |
Current
|
ISO 9445:2002 | Continuously cold-rolled stainless steel narrow strip, wide strip, plate/sheet and cut lengths Tolerances on dimensions and form |
ISO 404:2013 | Steel and steel products — General technical delivery requirements |
ISO 9328-4:2011 | Steel flat products for pressure purposes Technical delivery conditions Part 4: Nickel-alloy steels with specified low temperature properties |
ISO 6929:2013 | Steel products — Vocabulary |
ISO/TS 4949:2016 | Steel names based on letter symbols |
ISO/TS 15510:2003 | Stainless steels Chemical composition |
ISO 7778:2014 | Through-thickness characteristics for steel products |
ISO 9328-6:2011 | Steel flat products for pressure purposes Technical delivery conditions Part 6: Weldable fine grain steels, quenched and tempered |
ISO 2566-2:1984 | Steel Conversion of elongation values Part 2: Austenitic steels |
ISO 4885:2017 | Ferrous materials Heat treatments Vocabulary |
ISO 783:1999 | Metallic materials Tensile testing at elevated temperature |
ISO 7452:2013 | Hot-rolled steel plates — Tolerances on dimensions and shape |
ISO 9328-3:2011 | Steel flat products for pressure purposes Technical delivery conditions Part 3: Weldable fine grain steels, normalized |
ISO 148-1:2016 | Metallic materials — Charpy pendulum impact test — Part 1: Test method |
ISO 9328-5:2011 | Steel flat products for pressure purposes Technical delivery conditions Part 5: Weldable fine grain steels, thermomechanically rolled |
ISO 4948-1:1982 | Steels Classification Part 1: Classification of steels into unalloyed and alloy steels based on chemical composition |
ISO 9034:1987 | Hot-rolled structural steel wide flats Tolerances on dimensions and shape |
ISO 9444:2002 | Continuously hot-rolled stainless steel strip, plate/sheet and cut lengths Tolerances on dimensions and form |
ISO 9328-2:2011 | Steel flat products for pressure purposes Technical delivery conditions Part 2: Non-alloy and alloy steels with specified elevated temperature properties |
ISO 3651-2:1998 | Determination of resistance to intergranular corrosion of stainless steels — Part 2: Ferritic,austenitic and ferritic-austenitic (duplex) stainless steels — Corrosion test in media containing sulfuric acid |
ISO 7788:1985 | Steel — Surface finish of hot-rolled plates and wide flats — Delivery requirements |
ISO 2566-1:1984 | Steel Conversion of elongation values Part 1: Carbon and low alloy steels |
ISO 10474:2013 | Steel and steel products — Inspection documents |
EN 10204:2004 | Metallic products - Types of inspection documents |
ISO 4948-2:1981 | Steels Classification Part 2: Classification of unalloyed and alloy steels according to main quality classes and main property or application characteristics |
ISO 18286:2008 | Hot-rolled stainless steel plates — Tolerances on dimensions and shape |
ISO 377:2017 | Steel and steel products — Location and preparation of samples and test pieces for mechanical testing |
ISO 14284:1996 | Steel and iron — Sampling and preparation of samples for the determination of chemical composition |
ISO 9328-7:2011 | Steel flat products for pressure purposes Technical delivery conditions Part 7: Stainless steels |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.