09/30206879 DC : 0
Superseded
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
BS EN 2997-001 - AEROSPACE SERIES - CONNECTORS, ELECTRICAL, CIRCULAR, COUPLED BY THREADED RING, FIRE-RESISTANT OR NON FIRE-RESISTANT, OPERATING TEMPERATURES -65 DEGREES C TO 175 DEGREES C CONTINUOUS, 200 DEGREES C CONTINUOUS, 260 DEGREES C PEAK - PART 001: TECHNICAL SPECIFICATION
Available format(s)
Hardcopy , PDF
Superseded date
31-07-2011
Superseded by
Language(s)
English
Publisher
Important note : Users cannot be edited or removed once added to your Multi user PDF.
Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 Description
5 Design
6 Definition drawings and masses
7 Tests
8 Quality assurance
9 Designation and marking
10 Delivery conditions
11 Packaging
12 Storage
BS EN 2997-001
| Committee |
ACE/6
|
| DocumentType |
Draft
|
| Pages |
75
|
| PublisherName |
British Standards Institution
|
| Status |
Superseded
|
| SupersededBy |
| Standards | Relationship |
| PREN 2997-001 : 200P4 | Identical |
| EN 2591-212:2005 | Aerospace series - Elements of electrical and optical connection - Test methods - Part 212: Surface transfer impedance |
| EN 2591-306:1998 | Aerospace series - Elements of electrical and optical connection - Test methods - Part 306: Mould growth |
| EN 2591-205:1996 | Aerospace series - Elements of electrical and optical connection - Test methods - Part B5: Housing (shell) electrical continuity |
| EN 2282:1992 | Aerospace series - Characteristics of aircraft electrical supplies |
| EN 2591-301:1996 | Aerospace series - Elements of electrical and optical connection - Test methods - Part C1: Endurance at temperature |
| EN 2591-311:1997 | Aerospace series - Elements of electrical and optical connection - Test methods - Part 311: Low air pressure |
| EN 2591-305:1997 | Aerospace series - Elements of electrical and optical connection - Test methods - Part 305: Rapid change of temperature |
| EN 2591-319:1997 | Aerospace series - Elements of electrical and optical connection - Test methods - Part 319: Gastightness of solderless wrapped connections |
| EN 2591-421:2002 | Aerospace series - Elements of electrical and optical connection - Test methods - Part 421: Free fall |
| EN 2591-213:1997 | Aeropsace series - Elements of electrical and optical connection - Test methods - Part 213: Shielding effectiveness from 100 MHz to 1 GHz |
| EN 2591-418:2001 | Aerospace series - Elements of electrical and optical connection - Test methods - Part 418: Gauge insertion/extraction forces (female contacts) |
| EN 2591-425:2001 | Aerospace series - Elements of electrical and optical connection - Test methods - Part 425: Unwrapping capability, solderless wrapped connections |
| EN 3660-004:2009 | Aerospace series - Cable outlet accessories for circular and rectangular electrical and optical connectors - Part 004: Cable outlet, style A, straight, unsealed with clamp strain relief for EN 2997 and EN 4067 - Product standard |
| EN 2591-502:2001 | Aerospace series - Elements of electrical and optical connection - Test methods - Part 502: Restricted entry |
| EN 2267-002:2015 | Aerospace series - Cables, electrical, for general purpose - Operating temperatures between -55 °C and 260 °C - Part 002: General |
| EN 2591-316:1997 | Aerospace series - Elements of electrical and optical connection - Test methods - Part 316: Ozone resistance |
| EN 2591-315:2015 | Aerospace series - Elements of electrical and optical connection - Test methods - Part 315: Fluid resistance |
| EN 2591-405:1998 | Aerospace series - Elements of electrical and optical connection - Test methods - Part 405: Axial load |
| EN 2591-308:1998 | Aerospace series - Elements of electrical and optical connection - Test methods - Part 308: Sand and dust |
| EN 2591-318:1998 | Aerospace series - Elements of electrical and optical connection - Test methods - Part 318: Fire-resistance |
| EN 2591-401:1996 | Aerospace series - Elements of electrical and optical connection - Test methods - Part D1: Acceleration, steady state |
| EN 2591-412:1999 | Aerospace series - Elements of electrical and optical connection - Test methods - Part 412: Contact insertion and extraction forces |
| EN 2591-414:1998 | Aerospace series - Elements of electrical and optical connection - Test methods - Part 414: Unmating of lanyard release connectors |
| EN 2591-203:1996 | Aerospace series - Elements of electrical and optical connection - Test methods - Part B3: Electrical continuity at microvolt level |
| EN 2591-408:1998 | Aerospace series - Elements of electrical and optical connection - Test methods - Part 408: Mating and unmating forces |
| EN 2346-002:2006 | Aerospace series - Cable, electrical, fire resistant - Operating temperatures between - 65 °C and 260 °C - Part 002: General |
| EN 2591-323:1998 | Aerospace series - Elements of electrical and optical connection - Test methods - Part 323: Thermal shock |
| EN 2591-201:1996 | Aerospace series - Elements of electrical and optical connection - Test methods - Part B1: Contact resistance - Low level |
| EN 2591-515:2005 | Aerospace series - Elements of electrical and optical connection - Test methods - Part 515: Hydrolytic stability |
| EN 2591-428:2002 | Aerospace series - Elements of electrical and optical connection - Test methods - Part 428: Sinusoidal vibrations with passage of current for crimped terminal lugs |
| EN 2591-101:1994 | Aerospace series - Elements of electrical and optical connection - Test methods - Part 101: Visual examination |
| EN 2591-417:2001 | Aerospace series - Elements of electrical and optical connection - Test methods - Part 417: Tensile strength (crimped connection) |
| EN 2591-322:1998 | Aerospace series - Elements of electrical and optical connection - Test methods - Part 322: Hermeticity |
| EN 2591-312:1997 | Aerospace series - Elements of electrical and optical connection - Test methods - Part 312: Air leakage |
| EN 2591-102:1996 | Aerospace series - Elements of electrical and optical connection - Test methods - Part A2: Examination of dimensions and mass |
| EN 2591-424:2001 | Aerospace series - Elements of electrical and optical connection - Test methods - Part 424: Stripping force, solderless wrapped connections |
| EN 2591-514:2002 | Aerospace series - Elements of electrical and optical connection - Test methods - Part 514: Solderability of contacts with self-contained solder and flux |
| EN 2591-406:1998 | Aerospace series - Elements of electrical and optical connection - Test methods - Part 406: Mechanical endurance |
| EN 2591-216:1997 | Aerospace series - Elements of electrical and optical connection - Test methods - Part 216: Engagement depth of contacts |
| MIL-HDBK-454 Revision B:2007 | GENERAL GUIDELINES FOR ELECTRONIC EQUIPMENT |
| EN 2591-410:1998 | Aerospace series - Elements of electrical and optical connection - Test methods - Part 410: Insert retention in housing (axial) |
| EN 2591-423:2005 | Aerospace series - Elements of electrical and optical connection - Test methods - Part 423: Connector rear accessories thread strength |
| EN 2591-320:1997 | Aerospace series - Elements of electrical and optical connection - Test methods - Part 320: Simulated solar radiation at ground level |
| EN 2591-513:2002 | Aerospace series - Elements of electrical and optical connection - Test methods - Part 513: Magnetic permeability |
| EN 2591-420:2006 | Aerospace series - Elements of electrical and optical connection - Test methods - Part 420: Mechanical strength of rear accessories |
| EN 2591-204:1996 | Aerospace series - Elements of electrical and optical connection - Test methods - Part B4: Discontinuity of contacts in the microsecond range |
| EN 2591-427:2001 | Aerospace series - Elements of electrical and optical connection - Test methods - Part 427: Robustness of protective cover attachment |
| EN 2591-505:2001 | Aerospace series - Elements of electrical and optical connection - Test methods - Part 505: Contact protection effectiveness (scoop-proof) |
| EN 2591-206:1996 | Aerospace series - Elements of electrical and optical connection - Test methods - Part B6: Measurement of insulation resistance |
| EN 2591-507:2002 | Aerospace series - Elements of electrical and optical connection - Test methods - Part 507: Plating porosity |
| PREN 3197 : 200P2 | AEROSPACE SERIES - DESIGN AND INSTALLATION OF AIRCRAFT ELECTRICAL AND OPTICAL INTERCONNECTION SYSTEMS |
| EN 2591-317:1998 | Aerospace series - Elements of electrical and optical connection - Test methods - Part 317: Flammability |
| EN 2591-208:1996 | Aerospace series - Elements of electrical and optical connection - Test methods - Part B8: Temperature rise due to rated current |
| EN 2591-409:1999 | Aerospace series - Elements of electrical and optical connection - Test methods - Part 409: Contact retention in insert |
| EN 2591-313:1997 | Aerospace series - Elements of electrical and optical connection - Test methods - Part 313: Artificial rain |
| EN 2591-210:1998 | Aerospace series - Elements of electrical and optical connection - Test methods - Part 210: Electrical overload |
| EN 2591-506:2001 | Aerospace series - Elements of electrical and optical connection - Test methods - Part 506: Use of tools |
| EN 2591-214:2012 | Aerospace series - Elements of electrical and optical connection - Test methods - Part 214: Lightning strike, current and voltage pulse |
| EN 2591-407:1999 | Aerospace series - Elements of electrical and optical connection - Test methods - Part 407: Durability of contact retention system and seals |
| EN 2997-002:2016 | Aerospace series - Connectors, electrical, circular, coupled by threaded ring, fire-resistant or non fire-resistant, operating temperatures - 65 °C to 175 °C continuous, 200 °C continuous, 260 °C peak - Part 002: Specification of performance and contact arrangements |
| EN 2591-321:1997 | Aerospace series - Elements of electrical and optical connection - Test methods - Part 321: Damp heat, cyclic test |
| EN 2591-100:2005 | Aerospace series - Elements of electrical and optical connection - Test methods - Part 100: General |
| EN 2591-314:1997 | Aerospace series - Elements of electrical and optical connection - Test methods - Part 314: Immersion at low air pressure |
| ISO 4524-1:1985 | Metallic coatings Test methods for electrodeposited gold and gold alloy coatings Part 1: Determination of coating thickness |
| EN 2591-509:2001 | Aerospace series - Elements of electrical and optical connection - Test methods - Part 509: Adhesion of coating on contacts |
| EN 2591-413:1998 | Aerospace series - Elements of electrical and optical connection - Test methods - Part 413: Holding force of grounding spring system |
| EN 2591-309:1997 | Aerospace series - Elements of electrical and optical connection - Test methods - Part 309: Dry heat |
| EN 2591-501:2002 | Aerospace series - Elements of electrical and optical connection - Test methods - Part 501: Soft solderability |
| EN 2591-304:1997 | Aerospace series - Elements of electrical and optical connection - Test methods - Part 304: Damp heat steady state |
| EN 2591-402:2012 | Aerospace series - Elements of electrical and optical connection - Test methods - Part 402: Shock |
| EN 2591-503:2001 | Aerospace series - Elements of electrical and optical connection - Test methods - Part 503: Contact deformation after crimping |
| EN 2591-411:1998 | Aerospace series - Elements of electrical and optical connection - Test methods - Part 411: Insert retention in housing (torsional) |
| EN 2591-419:2001 | Aerospace series - Elements of electrical and optical connection - Test methods - Part 419: Stability of male contacts in insert |
| EN 2591-202:1996 | Aerospace series - Elements of electrical and optical connection - Test methods - Part B2: Contact resistance at rated current |
| EN 2591-302:1997 | Aerospace series - Elements of electrical and optical connection - Test methods - Part 302: Climatic sequence |
| EN 2591-209:1996 | Aerospace series - Elements of electrical and optical connection - Test methods - Part B9: Current temperature derating |
| EN 2591-211:2002 | Aerospaces series - Elements of electrical and optical connection - Test Methods - Part 211: Capacitance |
| EN 2591-508:2001 | Aerospace series - Elements of electrical and optical connection - Test methods - Part 508: Measurement of thickness of coating on contacts |
| EN 2591-426:2001 | Aerospace series - Elements of electrical and optical connection - Test methods - Part 426: Contact retention system effectiveness |
| EN 2591-307:2012 | Aerospace series - Elements of electrical and optical connection - Test methods - Part 307: Salt mist |
| EN 3909:2016 | Aerospace series - Test fluids and test methods for electrical and optical components and sub-assemblies |
| EN 2591-207:1996 | Aerospace series - Elements of electrical and optical connection - Test methods - Part B7: Voltage proof test |
| EN 2591-422:2002 | Aerospace series - Elements of electrical and optical connection - Test methods - Part 422: Locking wire hole strength |
| EN 2591-416:2001 | Aerospace series - Elements of electrical and optical connection - Test methods - Part 416: Contact bending strength |
| EN 2591-324:1998 | Aerospace series - Elements of electrical and optical connection - Test methods - Part 324: Interfacial sealing |
| EN 2591-512:2002 | Aerospace series - Elements of electrical and optical connection - Test methods - Part 512: Effectiveness of non-removable fixing of hermetically sealed connector shell |
| EN 2591-415:2001 | Aerospace series - Elements of electrical and optical connection - Test methodsPart 415: Test probe damage (female contacts) |
| PREN 3155-001 : 200P5 | AEROSPACE SERIES - ELECTRICAL CONTACTS USED IN ELEMENTS OF CONNECTION - PART 001: TECHNICAL SPECIFICATION |
| ISO 263:1973 | ISO inch screw threads General plan and selection for screws, bolts and nuts Diameter range 0,06 to 6 in |
| EN 2591-310:1998 | Aerospace series - Elements of electrical and optical connection - Test methods - Part 310: Cold |
| EN 2591-403:2012 | Aerospace series - Elements of electrical and optical connection - Test methods - Part 403: Sinusoidal and random vibration |
| EN 3660-003:2009 | Aerospace series - Cable outlet accessories for circular and rectangular electrical and optical connectors - Part 003: Grommet nut, style A for EN 2997 and EN 4067 - Product standard |
| EN 2591-404:1998 | Aerospace series - Elements of electrical and optical connection - Test methods - Part 404: Transverse load |
| EN 2591-303:1997 | Aerospace series - Elements of electrical and optical connection - Test methods - Part 303: Cold/low pressure and damp heat |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.