• 12/30239867 DC : 0

    Superseded A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

    BS EN 62368-1 - AUDIO/VIDEO, INFORMATION AND COMMUNICATION TECHNOLOGY EQUIPMENT - PART 1: SAFETY REQUIREMENTS

    Available format(s):  Hardcopy, PDF

    Superseded date:  30-09-2014

    Language(s):  English

    Published date: 

    Publisher:  British Standards Institution

    Add To Cart

    Table of Contents - (Show below) - (Hide below)

    FOREWORD
    INTRODUCTION
    0 Principles of this product safety standard
    1 Scope
    2 Normative references
    3 Terms, abbreviations and definitions
    4 General requirements
    5 Electrically-caused injury
    6 Electrically-caused fire
    7 Injury caused by hazardous substances
    8 Mechanically-caused injury
    9 Thermal burn injury
    10 Radiation
    11 Resistance to candle flame ignition
    Annex A (informative) - Examples of equipment
            within the scope of this standard
    Annex B (normative) - Normal operating condition
            tests, abnormal operating condition tests
            single fault condition tests
    Annex C (normative) - UV radiation
    Annex D (normative) - Test generators
    Annex E (normative) - Test conditions for equipment
            containing audio amplifiers
    Annex F (normative) - Equipment markings, instructions,
            and instructional safeguards
    Annex G (normative) - Components
    Annex H (normative) - Criteria for telephone ringing
            signals
    Annex I (informative) - Overvoltage categories
    Annex J (normative) - Insulated winding wires for use
            without interleaved insulation
    Annex K (normative) - Safety interlocks
    Annex L (normative) - Disconnect devices
    Annex M (normative) - Equipment containing batteries
            and their protection circuits
    Annex N (normative) - Electrochemical potentials
    Annex O (normative) - Measurement of creepage distances
            and clearances
    Annex P (normative) - Safeguards against entry of foreign
            objects and spillage of internal
    Annex Q (normative) - Interconnection with building wiring
    Annex R (normative) - Limited short-circuit test
    Annex S (normative) - Tests for resistance to heat and fire
    Annex T (normative) - Mechanical strength tests
    Annex U (normative) - Mechanical strength of CRTs
            and protection against the effects of
            implosion
    Annex V (normative) - Determination of accessible
            parts
    Annex W (informative) - Comparison of terms introduced
            in this standard
    Bibliography

    General Product Information - (Show below) - (Hide below)

    Comment Closes On
    Committee EPL/108
    Document Type Draft
    Publisher British Standards Institution
    Status Superseded
    Superseded By

    Standards Referencing This Book - (Show below) - (Hide below)

    IEC 60695-11-20:2015 Fire hazard testing - Part 11-20: Test flames - 500 W flame test method
    IEC 60950-1:2005+AMD1:2009+AMD2:2013 CSV Information technology equipment - Safety - Part 1: General requirements
    IEC 60112:2003+AMD1:2009 CSV METHOD FOR THE DETERMINATION OF THE PROOF AND THE COMPARATIVE TRACKING INDICES OF SOLID INSULATING MATERIALS
    ISO 4892-1:2016 Plastics Methods of exposure to laboratory light sources Part 1: General guidance
    IEC 60906-3:1994 IEC System of plugs and socket-outlets for household and similar purposes - Part 3: SELV plugs and socket-outlets, 16 A 6V, 12 V, 24 V, 48 V, a.c. and d.c.
    IEC 60728-11:2016 Cable networks for television signals, sound signals and interactive services - Part 11: Safety
    IEC 61558-2-1:2007 SAFETY OF POWER TRANSFORMERS, POWER SUPPLIES, REACTORS AND SIMILAR PRODUCTS - PART 2-1: PARTICULAR REQUIREMENTS AND TESTS FOR SEPARATING TRANSFORMERS AND POWER SUPPLIES INCORPORATING SEPARATING TRANSFORMERS FOR GENERAL APPLICATIONS
    IEC 60825-2:2004+AMD1:2006+AMD2:2010 CSV Safety of laser products - Part 2: Safety of optical fibre communication systems (OFCS)
    IEC 60245-1:2003+AMD1:2007 CSV Rubber insulated cables - Rated voltages up to and including 450/750 V - Part 1: General requirements
    IEC 60130-3:1965 CONNECTORS FOR FREQUENCIES BELOW 3 MHZ. - BATTERY CONNECTORS
    ISO 7010:2011 Graphical symbols Safety colours and safety signs Registered safety signs
    IEC 60998-1:2002 Connecting devices for low-voltage circuits for household and similar purposes - Part 1: General requirements
    ISO 10313:1993 Ambient air — Determination of the mass concentration of ozone — Chemiluminescence method
    IEC 60738-1:2006+AMD1:2009 CSV Thermistors - Directly heated positive temperature coefficient -Part 1: Generic specification
    IEC TS 60479-1:2005+AMD1:2016 CSV Effects of current on human beings and livestock - Part 1: Generalaspects
    IEC 62209-2:2010 Human exposure to radio frequency fields from hand-held and body-mounted wireless communication devices - Human models, instrumentation, and procedures - Part 2: Procedure to determine the specific absorption rate (SAR) for wireless communication devices used in close proximity to the human body (frequency range of 30 MHz to 6 GHz)
    IEC 60107-1:1997 Methods of measurement on receivers for television broadcast transmissions - Part 1: General considerations - Measurements at radio and video frequencies
    IEC 60664-4:2005 Insulation coordination for equipment within low-voltage systems - Part 4: Consideration of high-frequency voltage stress
    IEC 61984:2008 Connectors - Safety requirements and tests
    IEC 60227-7:1995+AMD1:2003+AMD2:2011 CSV Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V - Part 7: Flexible cables screened and unscreened with two or more conductors
    IEC 60384-14:2013+AMD1:2016 CSV Fixed capacitors for use in electronic equipment - Part 14: Sectional specification - Fixed capacitors for electromagnetic interference suppression and connection to the supply mains
    ISO 871:2006 Plastics Determination of ignition temperature using a hot-air furnace
    IEC 60896-11:2002 Stationary lead-acid batteries - Part 11: Vented types - General requirements and methods of tests
    IEC 61427 : 2.0 SECONDARY CELLS AND BATTERIES FOR PHOTOVOLTAIC ENERGY SYSTEMS (PVES) - GENERAL REQUIREMENTS AND METHODS OF TEST
    IEC 62209-1:2016 Measurement procedure for the assessment of specific absorption rate of human exposure to radio frequency fields from hand-held and body-mounted wireless communication devices - Part 1: Devices used next to the ear (Frequency range of 300 MHz to 6 GHz)
    IEC 60050-195:1998 International Electrotechnical Vocabulary (IEV) - Part 195: Earthing and protection against electric shock
    IEC 61960:2011 Secondary cells and batteries containing alkaline or other non-acid electrolytes - Secondary lithium cells and batteries for portable applications
    ISO 3864-2:2016 Graphical symbols Safety colours and safety signs Part 2: Design principles for product safety labels
    IEC 61558-2-4:2009 SAFETY OF TRANSFORMERS, REACTORS, POWER SUPPLY UNITS AND SIMILAR PRODUCTS FOR SUPPLY VOLTAGES UP TO 1100 V - PART 2-4: PARTICULAR REQUIREMENTS AND TESTS FOR ISOLATING TRANSFORMERS AND POWER SUPPLY UNITS INCORPORATING ISOLATING TRANSFORMERS
    IEC 61293:1994 MARKING OF ELECTRICAL EQUIPMENT WITH RATINGS RELATED TO ELECTRICAL SUPPLY - SAFETY REQUIREMENTS
    ISO 13964:1998 Air quality — Determination of ozone in ambient air — Ultraviolet photometric method
    IEC TS 61201:2007 Use of conventional touch voltage limits - Application guide
    ISO 13732-1:2006 Ergonomics of the thermal environment Methods for the assessment of human responses to contact with surfaces Part 1: Hot surfaces
    IEC TR 60083:2015 Plugs and socket-outlets for domestic and similar general use standardized in member countries of IEC
    ISO 9773:1998 Plastics Determination of burning behaviour of thin flexible vertical specimens in contact with a small-flame ignition source
    IEC 60332-1-3:2004+AMD1:2015 CSV Tests on electric and optical fibre cables under fire conditions - Part 1-3: Test for vertical flame propagation for a single insulatedwire or cable - Procedure for determination of flamingdroplets/particles
    IEC TR 62471-2:2009 Photobiological safety of lamps and lamp systems - Part 2: Guidance on manufacturing requirements relating to non-laser optical radiation safety
    IEC 60169-3:1965 Radio-frequency connectors - Part 3: Two-pin connector for twin balanced aerial feeders
    IEC 60999-2:2003 Connecting devices - Electrical copper conductors - Safety requirements for screw-type and screwless-type clamping units - Part 2: Particular requirements for clamping units for conductors above 35 mm2 up to 300 mm2 (included)
    ISO/IEC 28360:2015 Information technology Office equipment Determination of chemical emission rates from electronic equipment
    IEC 60050-212:2010 International Electrotechnical Vocabulary (IEV) - Part 212: Electrical insulating solids, liquids and gases
    IEC 60896-21:2004 Stationary lead-acid batteries - Part 21: Valve regulated types - Methods of test
    IEC 60269-2:2013+AMD1:2016 CSV Low-voltage fuses - Part 2: Supplementary requirements for fuses for use by authorized persons (fuses mainly for industrial application) - Examples of standardized systems of fuses A to K
    IEC 62151:2000 Safety of equipment electrically connected to a telecommunication network
    IEC 61558-2-16:2009+AMD1:2013 CSV Safety of transformers, reactors, power supply units and similar products for supply voltages up to 1 100 V - Part 2-16: Particularrequirements and tests for switch mode power supply units andtransformers for switch mode power supply units
    IEC 60130-9:2011 Connectors for frequencies below 3 MHz - Part 9: Circular connectors for radio and associated sound equipment
    IEC 60332-2-2:2004 TESTS ON ELECTRIC AND OPTICAL FIBRE CABLES UNDER FIRE CONDITIONS - PART 2-2: TEST FOR VERTICAL FLAME PROPAGATION FOR A SINGLE SMALL INSULATED WIRE OR CABLE -PROCEDURE FOR DIFFUSION FLAME
    IEC 60825-1:2014 Safety of laser products - Part 1: Equipment classification and requirements
    CFR 21(PTS800-1299) : 0 FOOD AND DRUGS - FOOD AND DRUG ADMINISTRATION, CHAPTER 1 DEPARTMENT OF HEALTH AND HUMAN SERVICES - PARTS 800-1299
    ISO 8256:2004 Plastics Determination of tensile-impact strength
    IEC 60825-12:2004 Safety of laser products - Part 12: Safety of free space optical communication systems used for transmission of information
    IEC 60079-10-1:2015 Explosive atmospheres - Part 10-1: Classification of areas - Explosive gas atmospheres
    IEC 61810-1:2015 Electromechanical elementary relays - Part 1: General and safety requirements
    IEC 60950-22:2016 Information technology equipment - Safety - Part 22: Equipment to be installed outdoors
    CFR 47(PTS40-69) : OCT 2017 TELECOMMUNICATIONS - FEDERAL COMMUNICATIONS COMMISSION
    IEC 60950-23:2005 Information technology equipment - Safety - Part 23: Large data storage equipment
    IEC 60127-1:2006+AMD1:2011+AMD2:2015 CSV Miniature fuses - Part 1: Definitions for miniature fuses andgeneral requirements for miniature fuse-links
    IEC 60747-5-2:1997+AMD1:2002 CSV Discrete semiconductor devices and integrated circuits - Part 5-2: Optoelectronic devices - Essential ratings and characteristics
    IEC 60695-10-3:2016 FIRE HAZARD TESTING - PART 10-3: ABNORMAL HEAT - MOULD STRESS RELIEF DISTORTION TEST
    IEC 60027-1:1992 Letters symbols to be used in electrical technology - Part 1: General
    IEC 60851-6:2012 WINDING WIRES - TEST METHODS - PART 6: THERMAL PROPERTIES
    IEC 60851-5:2008+AMD1:2011 CSV Winding wires - Test methods - Part 5: Electrical properties
    IEC 60332-1-1:2004+AMD1:2015 CSV Tests on electric and optical fibre cables under fire conditions - Part 1-1: Test for vertical flame propagation for a single insulatedwire or cable - Apparatus
    IEC 60747-5-3:1997+AMD1:2002 CSV Discrete semiconductor devices and integrated circuits - Part 5-3: Optoelectronic devices - Measuring methods
    IEC 61056-2:2012 General purpose lead-acid batteries (valve-regulated types) - Part 2: Dimensions, terminals and marking
    IEC 60227-1:2007 Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V - Part 1: General requirements
    IEC 60332-1-2:2004+AMD1:2015 CSV Tests on electric and optical fibre cables under fire conditions - Part 1-2: Test for vertical flame propagation for a single insulatedwire or cable - Procedure for 1 kW pre-mixed flame
    IEC 60505:2011 Evaluation and qualification of electrical insulation systems
    IEC 60999-1:1999 Connecting devices - Electrical copper conductors - Safety requirements for screw-type and screwless-type clamping units - Part 1: General requirements and particular requirements for clamping units for conductors from 0,2 mm2 up to 35 mm2 (included)
    EN 60728-11 : 2017 CABLE NETWORKS FOR TELEVISION SIGNALS, SOUND SIGNALS AND INTERACTIVE SERVICES - PART 11: SAFETY (IEC 60728-11:2016 + COR1:2016)
    IEC 60601-2-4:2010 Medical electrical equipment - Part 2-4: Particular requirements for the basic safety and essential performance of cardiac defibrillators
    IEC 60085:2007 ELECTRICAL INSULATION - THERMAL EVALUATION AND DESIGNATION
    IEC 61558-2-17:1997 SAFETY OF POWER TRANSFORMERS, POWER SUPPLY UNITS AND SIMILAR - PART 2: PARTICULAR REQUIREMENTS FOR TRANSFORMERS FOR SWITCH MODE POWER SUPPLIES
    IEC TR 62368-2:2015 Audio/video, information and communication technology equipment - Part 2: Explanatory information related to IEC 62368-1
    IEC 60908:1999 Audio recording - Compact disc digital audio system
    ISO/IEC Guide 51:2014 Safety aspects Guidelines for their inclusion in standards
    IEC 61558-1:2017 Safety of transformers, reactors, power supply units and combinations thereof - Part 1: General requirements and tests
    EN 50332-1:2013 SOUND SYSTEM EQUIPMENT: HEADPHONES AND EARPHONES ASSOCIATED WITH PERSONAL MUSIC PLAYERS - MAXIMUM SOUND PRESSURE LEVEL MEASUREMENT METHODOLOGY - PART 1: GENERAL METHOD FOR "ONE PACKAGE EQUIPMENT"
    ISO/IEC Guide 37:2012 Instructions for use of products by consumers
    EN 71-1:2014 SAFETY OF TOYS - PART 1: MECHANICAL AND PHYSICAL PROPERTIES
    IEC 61643-1:2005 Low-voltage surge protective devices - Part 1: Surge protective devices connected to low-voltage power distribution systems - Requirements and tests
    ISO 180:2000 Plastics Determination of Izod impact strength
    ECMA 267 : 3ED 2001 120 MM DVD - READ-ONLY DISK
    IEC 60906-2:2011 IEC system of plugs and socket-outlets for household and similar purposes - Part 2: Plugs and socket-outlets 15 A 125 V a.c. and 20 A 125 V a.c.
    IEC 60529:1989+AMD1:1999+AMD2:2013 CSV Degrees of protection provided by enclosures (IP Code)
    ISO 9772:2012 Cellular plastics Determination of horizontal burning characteristics of small specimens subjected to a small flame
    IEC 61058-1:2016 Switches for appliances - Part 1: General requirements
    IEC 60896-22:2004 Stationary lead-acid batteries - Part 22: Valve regulated types - Requirements
    IEC 61189-3:2007 Test methods for electrical materials, printed boards and other interconnection structures and assemblies - Part 3: Test methods for interconnection structures (printed boards)
    IEC 60364-4-44:2007+AMD1:2015 CSV Low-voltage electrical installations - Part 4-44: Protection for safety - Protection against voltage disturbances and electromagnetic disturbances
    IEC 60691:2015 Thermal-links - Requirements and application guide
    IEC 60947-1:2007+AMD1:2010+AMD2:2014 CSV Low-voltage switchgear and controlgear - Part 1: General rules
    IEC 61056-1:2012 General purpose lead-acid batteries (valve-regulated types) - Part 1: General requirements, functional characteristics - Methods of test
    IEC 60695-11-10:2013 Fire hazard testing - Part 11-10: Test flames - 50 W horizontal and vertical flame test methods
    IEC 61051-2:1991 Varistors for use in electronic equipment - Part 2: Sectional specification for surge suppression varistors
    IEC 61643-11:2011 Low-voltage surge protective devices - Part 11: Surge protective devices connected to low-voltage power systems - Requirements and test methods
    IEC TS 60695-11-21:2005 FIRE HAZARD TESTING - PART 11-21: TEST FLAMES - 500 W VERTICAL FLAME TEST METHOD FOR TUBULAR POLYMERIC MATERIALS
    IEC 60906-1:2009 IEC system of plugs and socket-outlets for household and similar purposes - Part 1: Plugs and socket-outlets 16 A 250 V a.c.
    EN 50332-2:2013 SOUND SYSTEM EQUIPMENT: HEADPHONES AND EARPHONES ASSOCIATED WITH PERSONAL MUSIC PLAYERS - MAXIMUM SOUND PRESSURE LEVEL MEASUREMENT METHODOLOGY - PART 2: MATCHING OF SETS WITH HEADPHONES IF EITHER OR BOTH ARE OFFERED SEPARATELY, OR ARE OFFERED AS ONE PACKAGE EQUIPMENT BUT WITH STANDARDISED CONNECTORS BETWEEN THE TWO ALLOWING TO COMBINE COMPONENTS OF DIFFERENT MANUFACTURERS
    IEC 60851-3:2009+AMD1:2013 CSV Winding wires - Test methods - Part 3: Mechanical properties
    IEC 60664-5:2007 Insulation coordination for equipment within low-voltage systems - Part 5: Comprehensive method for determining clearances and creepage distances equal to or less than 2 mm
    ISO 4892-4:2013 Plastics Methods of exposure to laboratory light sources Part 4: Open-flame carbon-arc lamps
    IEC 62471:2006 Photobiological safety of lamps and lamp systems
    IEC 60332-2-1:2004 TESTS ON ELECTRIC AND OPTICAL FIBRE CABLES UNDER FIRE CONDITIONS - PART 2-1: TEST FOR VERTICAL FLAME PROPAGATION FOR A SINGLE SMALL INSULATED WIRE OR CABLE - APPARATUS
    ISO 179-1:2010 Plastics Determination of Charpy impact properties Part 1: Non-instrumented impact test
    EG 202 518 : 1.4.1 SPEECH AND MULTIMEDIA TRANSMISSION QUALITY (STQ); ACOUSTIC OUTPUT OF TERMINAL EQUIPMENT; MAXIMUM LEVELS AND TEST METHODOLOGY FOR VARIOUS APPLICATIONS
    ISO 306:2013 Plastics Thermoplastic materials Determination of Vicat softening temperature (VST)
    ISO 4892-2:2013 Plastics Methods of exposure to laboratory light sources Part 2: Xenon-arc lamps
    IEC 60050-826:2004 International Electrotechnical Vocabulary (IEV) - Part 826: Electrical installations
    IEC 61965:2003 Mechanical safety of cathode ray tubes
    IEC 61434:1996 Secondary cells and batteries containing alkaline or other non-acid electrolytes - Guide to designation of current in alkaline secondary cell and battery standards
    IEC 60664-3:2016 INSULATION COORDINATION FOR EQUIPMENT WITHIN LOW-VOLTAGE SYSTEMS - PART 3: USE OF COATING, POTTING OR MOULDING FOR PROTECTION AGAINST POLLUTION
    IEC 60747-5-1:1997+AMD1:2001+AMD2:2002 CSV Discrete semiconductor devices and integrated circuits - Part 5-1: Optoelectronic devices - General
    IEC 60747-5-5:2007+AMD1:2013 CSV Semiconductor devices - Discrete devices - Part 5-5: Optoelectronic devices - Photocouplers
    IEC 62133 : 2.0EN+(REDLINE+VERSION) SECONDARY CELLS AND BATTERIES CONTAINING ALKALINE OR OTHER NON-ACID ELECTROLYTES - SAFETY REQUIREMENTS FOR PORTABLE SEALED SECONDARY CELLS, AND FOR BATTERIES MADE FROM THEM, FOR USE IN PORTABLE APPLICATIONS
    IEC 60695-10-2:2014 FIRE HAZARD TESTING - PART 10-2: ABNORMAL HEAT - BALL PRESSURE TEST METHOD
    IEC 61508-1:2010 Functional safety of electrical/electronic/programmable electronic safety-related systems - Part 1: General requirements (see Functional Safety and IEC 61508)
    IEC 60086-4:2014 Primary batteries - Part 4: Safety of lithium batteries
    ISO 4046-4:2002 Paper, board, pulps and related terms Vocabulary Part 4: Paper and board grades and converted products
    ISO 7000:2014 Graphical symbols for use on equipment Registered symbols
    IEC 60317-43:1997+AMD1:2010 CSV Specifications for particular types of winding wires - Part 43: Aromatic polyimide type wrapped round copper wire, class 240
    IEC 61140:2016 Protection against electric shock - Common aspects for installation and equipment
    IEC 61204-7:2016 EXV LOW-VOLTAGE SWITCH MODE POWER SUPPLIES - PART 7: SAFETY REQUIREMENTS
    IEC 61032:1997 Protection of persons and equipment by enclosures - Probes for verification
    IEC 61959:2004 SECONDARY CELLS AND BATTERIES CONTAINING ALKALINE OR OTHER NON-ACID ELECTROLYTES - MECHANICAL TESTS FOR SEALED PORTABLE SECONDARY CELLS AND BATTERIES
    IEC 60695-11-5 : 2.0 FIRE HAZARD TESTING - PART 11-5: TEST FLAMES - NEEDLE-FLAME TEST METHOD - APPARATUS, CONFIRMATORY TEST ARRANGEMENT AND GUIDANCE
    ISO 178:2010 Plastics Determination of flexural properties
    IEC 62281 : 3.0 SAFETY OF PRIMARY AND SECONDARY LITHIUM CELLS AND BATTERIES DURING TRANSPORT
    IEC 60664-1:2007 Insulation coordination for equipment within low-voltage systems - Part 1: Principles, requirements and tests
    IEC 61189-2:2006 Test methods for electrical materials, printed boards and other interconnection structures and assemblies - Part 2: Test methods for materials for interconnection structures
    ASTM D 1133 : 2013 : REDLINE Standard Test Method for Kauri-Butanol Value of Hydrocarbon Solvents
    IEEE 269 : 2010 STANDARD METHODS FOR MEASURING TRANSMISSION PERFORMANCE OF ANALOG AND DIGITAL TELEPHONE SETS, HANDSETS, AND HEADSETS
    IEC 62485-2:2010 Safety requirements for secondary batteries and battery installations - Part 2: Stationary batteries
    IEC 60990:2016 Methods of measurement of touch current and protective conductor current
    IEC TS 62393:2005 PORTABLE AND HAND-HELD MULTIMEDIA EQUIPMENT - MOBILE COMPUTERS - BATTERY RUN-TIME MEASUREMENT
    IEC 60730-1:2013+AMD1:2015 CSV Automatic electrical controls - Part 1: General requirements
    • Access your standards online with a subscription

      Features

      • Simple online access to standards, technical information and regulations
      • Critical updates of standards and customisable alerts and notifications
      • Multi - user online standards collection: secure, flexibile and cost effective