CISPR 12:2007+AMD1:2009 CSV
|
Vehicles, boats and internal combustion engines - Radio disturbance characteristics - Limits and methods of measurement for the protection of off-board receivers |
ISO 11452-3:2016
|
Road vehicles — Component test methods for electrical disturbances from narrowband radiated electromagnetic energy — Part 3: Transverse electromagnetic (TEM) cell |
IEC 60245-1:2003+AMD1:2007 CSV
|
Rubber insulated cables - Rated voltages up to and including 450/750 V - Part 1: General requirements |
ISO 7010:2011
|
Graphical symbols Safety colours and safety signs Registered safety signs |
EN 60068-2-75:2014
|
ENVIRONMENTAL TESTING - PART 2-75: TESTS - TEST EH: HAMMER TESTS (IEC 60068-2-75:2014) |
EN 61000-6-1:2007
|
ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 6-1: GENERIC STANDARDS - IMMUNITY FOR RESIDENTIAL, COMMERCIAL AND LIGHT-INDUSTRIAL ENVIRONMENTS |
ISO 8098:2014
|
Cycles Safety requirements for bicycles for young children |
EN 61000-6-3:2007/A1:2011/AC:2012
|
ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 6-3: GENERIC STANDARDS - EMISSION STANDARD FOR RESIDENTIAL, COMMERCIAL AND LIGHT-INDUSTRIAL ENVIRONMENTS (IEC 61000-6-3:2006/A1:2010) |
EN 50272-4 : 2007
|
SAFETY REQUIREMENTS FOR SECONDARY BATTERIES AND BATTERY INSTALLATIONS - PART 4: BATTERIES FOR USE IN PORTABLE APPLIANCES |
IEC 61960:2011
|
Secondary cells and batteries containing alkaline or other non-acid electrolytes - Secondary lithium cells and batteries for portable applications |
EN 60034-1:2010/corrigendum Oct. 2010
|
ROTATING ELECTRICAL MACHINES - PART 1: RATING AND PERFORMANCE |
EN 62281:2017 (edition 3)
|
Safety of primary and secondary lithium cells and batteries during transport |
EN 61951-1:2017 (edition 4)
|
Secondary cells and batteries containing alkaline or other non-acid electrolytes - Secondary sealed cells and batteries for portable applications - Part 1: Nickel-cadmium |
ISO 6742-1:2015
|
Cycles Lighting and retro-reflective devices Part 1: Lighting and light signalling devices |
EN 61000-3-3:2013
|
ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 3-3: LIMITS - LIMITATION OF VOLTAGE CHANGES, VOLTAGE FLUCTUATIONS AND FLICKER IN PUBLIC LOW-VOLTAGE SUPPLY SYSTEMS, FOR EQUIPMENT WITH RATED CURRENT <= 16 A PER PHASE AND NOT SUBJECT TO CONDITIONAL CONNECTION (IEC 61000-3-3:2013) |
ISO 11452-4:2011
|
Road vehicles Component test methods for electrical disturbances from narrowband radiated electromagnetic energy Part 4: Harness excitation methods |
ISO 8124-1:2014
|
Safety of toys Part 1: Safety aspects related to mechanical and physical properties |
ISO 9633:2001
|
Cycle chains Characteristics and test methods |
IEC 61000-6-1 : 3.0
|
ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 6-1: GENERIC STANDARDS - IMMUNITY STANDARD FOR RESIDENTIAL, COMMERCIAL AND LIGHT-INDUSTRIAL ENVIRONMENTS |
EN 61000-4-2:2009
|
ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 4-2: TESTING AND MEASUREMENT TECHNIQUES - ELECTROSTATIC DISCHARGE IMMUNITY TEST |
EN 60335-2-29:2004/A2:2010
|
HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-29: PARTICULAR REQUIREMENTS FOR BATTERY CHARGERS |
ISO 12100:2010
|
Safety of machinery General principles for design Risk assessment and risk reduction |
ISO 6742-2:2015
|
Cycles Lighting and retro-reflective devices Part 2: Retro-reflective devices |
2006/42/EC : 2006 AMD 4 2014
|
DIRECTIVE 2006/42/EC OF THE EUROPEAN PARLIAMENT AND OF THE COUNCIL OF 17 MAY 2006 ON MACHINERY, AND AMENDING DIRECTIVE 95/16/EC (RECAST) (TEXT WITH EEA RELEVANCE) |
ISO 2575:2010
|
Road vehicles Symbols for controls, indicators and tell-tales |
ISO 5775-1:2014
|
Bicycle tyres and rims Part 1: Tyre designations and dimensions |
ISO 3452-1:2013
|
Non-destructive testing Penetrant testing Part 1: General principles |
CISPR 25:2016
|
Vehicles, boats and internal combustion engines - Radio disturbance characteristics - Limits and methods of measurement for the protection of on-board receivers |
IEC TR 62188:2003
|
SECONDARY CELLS AND BATTERIES CONTAINING ALKALINE OR OTHER NON-ACID ELECTROLYTES - DESIGN AND MANUFACTURING RECOMMENDATIONS FOR PORTABLE BATTERIES MADE FROM SEALED SECONDARY CELLS |
IEC 61000-6-3:2006+AMD1:2010 CSV
|
Electromagnetic compatibility (EMC) - Part 6-3: Generic standards - Emission standard for residential, commercial and light-industrial environments |
EN 61951-2:2017 (edition 4)
|
Secondary cells and batteries containing alkaline or other non acid electrolytes - Secondary sealed cells and batteries for portable applications - Part 2: Nickel-metal hydride |
EN 61959 : 2004
|
SECONDARY CELLS AND BATTERIES CONTAINING ALKALINE OR OTHER NON-ACID ELECTROLYTES - MECHANICAL TESTS FOR SEALED PORTABLE SECONDARY CELLS AND BATTERIES |
ISO 3452-3:2013
|
Non-destructive testing Penetrant testing Part 3: Reference test blocks |
ISO 11243:2016
|
Cycles Luggage carriers for bicycles Requirements and test methods |
ISO 5775-2:2015
|
Bicycle tyres and rims Part 2: Rims |
EN 55014-2:2015
|
ELECTROMAGNETIC COMPATIBILITY - REQUIREMENTS FOR HOUSEHOLD APPLIANCES, ELECTRIC TOOLS AND SIMILAR APPARATUS - PART 2: IMMUNITY - PRODUCT FAMILY STANDARD (CISPR 14-2:2015) |
IEC 61951-2:2017
|
Secondary cells and batteries containing alkaline or other non acid electrolytes - Secondary sealed cells and batteries for portable applications - Part 2: Nickel-metal hydride |
ISO 3452-2:2013
|
Non-destructive testing Penetrant testing Part 2: Testing of penetrant materials |
IEC 61951-1:2017
|
Secondary cells and batteries containing alkaline or other non-acid electrolytes - Secondary sealed cells and batteries for portable applications - Part 1: Nickel-Cadmium |
EN 22248 : 1992
|
COMPLETE, FILLED TRANSPORT PACKAGES - METHOD FOR DETERMINATION OF RESISTANCE TO VERTICAL IMPACT BY DROPPING (ISO 2248:1985) |
IEC 60529:1989+AMD1:1999+AMD2:2013 CSV
|
Degrees of protection provided by enclosures (IP Code) |
ISO 11452-2:2004
|
Road vehicles Component test methods for electrical disturbances from narrowband radiated electromagnetic energy Part 2: Absorber-lined shielded enclosure |
IEC 61000-4-2:2008
|
Electromagnetic compatibility (EMC) - Part 4-2: Testing and measurement techniques - Electrostatic discharge immunity test |
ISO 11452-1:2015
|
Road vehicles Component test methods for electrical disturbances from narrowband radiated electromagnetic energy Part 1: General principles and terminology |
EN 61960:2011
|
SECONDARY CELLS AND BATTERIES CONTAINING ALKALINE OR OTHER NON-ACID ELECTROLYTES - SECONDARY LITHIUM CELLS AND BATTERIES FOR PORTABLE APPLICATIONS |
EN 61000-3-2:2014
|
ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 3-2: LIMITS - LIMITS FOR HARMONIC CURRENT EMISSIONS (EQUIPMENT INPUT CURRENT <= 16 A PER PHASE) (IEC 61000-3-2:2014) |
IEC 60335-2-29:2016
|
Household and similar electrical appliances - Safety - Part 2-29: Particular requirements for battery chargers |
EN ISO 12100:2010 (edition 2)
|
Safety of machinery - General principles for design - Risk assessment and risk reduction (ISO 12100:2010) |
IEC 61000-3-3 : 3.0EN+(REDLINE+VERSION)
|
ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 3-3: LIMITS - LIMITATION OF VOLTAGE CHANGES, VOLTAGE FLUCTUATIONS AND FLICKER IN PUBLIC LOW-VOLTAGE SUPPLY SYSTEMS, FOR EQUIPMENT WITH RATED CURRENT <= 16 A PER PHASE AND NOT SUBJECT TO CONDITIONAL CONNECTION |
IEC 60068-2-75:2014
|
Environmental testing - Part 2-75: Tests - Test Eh: Hammer tests |
ISO 11452-5:2002
|
Road vehicles Component test methods for electrical disturbances from narrowband radiated electromagnetic energy Part 5: Stripline |
EN 60335-1:2012/A13:2017
|
HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 1: GENERAL REQUIREMENTS (IEC 60335-1:2010, MODIFIED) |
IEC 62133 : 2.0EN+(REDLINE+VERSION)
|
SECONDARY CELLS AND BATTERIES CONTAINING ALKALINE OR OTHER NON-ACID ELECTROLYTES - SAFETY REQUIREMENTS FOR PORTABLE SEALED SECONDARY CELLS, AND FOR BATTERIES MADE FROM THEM, FOR USE IN PORTABLE APPLICATIONS |
EN 55012:2007/A1:2009
|
VEHICLES, BOATS AND INTERNAL COMBUSTION ENGINES - RADIO DISTURBANCE CHARACTERISTICS - LIMITS AND METHODS OF MEASUREMENT FOR THE PROTECTION OF OFF-BOARD RECEIVERS |
EN 60529:1991/AC:2016-12
|
DEGREES OF PROTECTION PROVIDED BY ENCLOSURES (IP CODE) (IEC 60529 EDITION 2.2 CORRIGENDUM 2:2015) |
IEC 82079-1:2012
|
Preparation of instructions for use - Structuring, content and presentation - Part 1: General principles and detailed requirements |
ISO 13715:2017
|
Technical product documentation Edges of undefined shape Indication and dimensioning |
IEC 61959:2004
|
SECONDARY CELLS AND BATTERIES CONTAINING ALKALINE OR OTHER NON-ACID ELECTROLYTES - MECHANICAL TESTS FOR SEALED PORTABLE SECONDARY CELLS AND BATTERIES |
IEC 62281 : 3.0
|
SAFETY OF PRIMARY AND SECONDARY LITHIUM CELLS AND BATTERIES DURING TRANSPORT |
EN ISO 7010 : 2012 AMD 7 2017
|
GRAPHICAL SYMBOLS - SAFETY COLOURS AND SAFETY SIGNS - REGISTERED SAFETY SIGNS (ISO 7010:2011/AMD 7:2016) |
ISO 3452-4:1998
|
Non-destructive testing Penetrant testing Part 4: Equipment |
EN 55014-1:2017
|
ELECTROMAGNETIC COMPATIBILITY - REQUIREMENTS FOR HOUSEHOLD APPLIANCES, ELECTRIC TOOLS AND SIMILAR APPARATUS - PART 1: EMISSION (CISPR 14-1:2016 + COR1:2016) |
IEC 60364-5-52:2009
|
Low-voltage electrical installations - Part 5-52: Selection and erection of electrical equipment - Wiring systems |
ISO 11451-1:2015
|
Road vehicles Vehicle test methods for electrical disturbances from narrowband radiated electromagnetic energy Part 1: General principles and terminology |
IEC 61000-3-2 : 4.0
|
ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 3-2: LIMITS - LIMITS FOR HARMONIC CURRENT EMISSIONS (EQUIPMENT INPUT CURRENT <= 16 A PER PHASE) |
EN 62133:2013
|
SECONDARY CELLS AND BATTERIES CONTAINING ALKALINE OR OTHER NON-ACID ELECTROLYTES - SAFETY REQUIREMENTS FOR PORTABLE SEALED SECONDARY CELLS, AND FOR BATTERIES MADE FROM THEM, FOR USE IN PORTABLE APPLICATIONS (IEC 62133:2012) |