EN 12390-3:2009/AC:2011
|
TESTING HARDENED CONCRETE - PART 3: COMPRESSIVE STRENGTH OF TEST SPECIMENS |
EN ISO 4628-2:2016
|
Paints and varnishes - Evaluation of degradation of coatings - Designation of quantity and size of defects, and of intensity of uniform changes in appearance - Part 2: Assessment of degree of blistering (ISO 4628-2:2016) |
ISO 8502-4:2017
|
Preparation of steel substrates before application of paints and related products — Tests for the assessment of surface cleanliness — Part 4: Guidance on the estimation of the probability of condensation prior to paint application |
EN 12390-8:2009
|
Testing hardened concrete - Part 8: Depth of penetration of water under pressure |
ISO 8501-1:2007
|
Preparation of steel substrates before application of paints and related products — Visual assessment of surface cleanliness — Part 1: Rust grades and preparation grades of uncoated steel substrates and of steel substrates after overall removal of previous coatings |
EN 1504-5:2013
|
PRODUCTS AND SYSTEMS FOR THE PROTECTION AND REPAIR OF CONCRETE STRUCTURES - DEFINITIONS, REQUIREMENTS, QUALITY CONTROL AND EVALUATION OF CONFORMITY - PART 5: CONCRETE INJECTION |
EN 1504-6:2006
|
Products and systems for the protection and repair of concrete structures - Definitions, requirements, quality control and evaluation of conformity - Part 6: Anchoring of reinforcing steel bar |
EN 12190:1998
|
Products and systems for the protection and repair of concrete structures - Test methods - Determination of compressive strength of repair mortar |
EN 12504-3:2005
|
Testing concrete in structures - Part 3: Determination of pull-out force |
EN ISO 4628-1:2016
|
PAINTS AND VARNISHES - EVALUATION OF DEGRADATION OF COATINGS - DESIGNATION OF QUANTITY AND SIZE OF DEFECTS, AND OF INTENSITY OF UNIFORM CHANGES IN APPEARANCE - PART 1: GENERAL INTRODUCTION AND DESIGNATION SYSTEM (ISO 4628-1:2016) |
EN 1504-7:2006
|
Products and systems for the protection and repair of concrete structures - Definitions, requirements, quality control and evaluation of conformity - Part 7: Reinforcement corrosion protection |
EN ISO 4288 : 1997
|
GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - SURFACE TEXTURE: PROFILE METHOD - RULES AND PROCEDURES FOR THE ASSESSMENT OF SURFACE TEXTURE |
EN 12350-6:2009
|
Testing fresh concrete - Part 6: Density |
EN 1992-3:2006
|
Eurocode 2 - Design of concrete structures - Part 3: Liquid retaining and containment structures |
ISO 2808:2007
|
Paints and varnishes Determination of film thickness |
EN 12390-7:2009
|
Testing hardened concrete - Part 7: Density of hardened concrete |
EN 1504-3:2005
|
Products and systems for the protection and repair of concrete structures - Definitions, requirements, quality control and evaluation of conformity - Part 3: Structural and non-structural repair |
EN 1542:1999
|
Products and systems for the protection and repair of concrete structures - Test methods - Measurement of bond strength by pull-off |
ISO 565:1990
|
Test sieves — Metal wire cloth, perforated metal plate and electroformed sheet — Nominal sizes of openings |
EN 13395-2:2002
|
Products and systems for the protection and repair of concrete structures - Test methods - Determination of workability - Part 2: Test for flow of grout or mortar |
EN ISO 2409:2013
|
Paints and varnishes - Cross-cut test (ISO 2409:2013) |
EN 10080:2005
|
Steel for the reinforcement of concrete - Weldable reinforcing steel - General |
EN 1992-2:2005/AC:2008
|
EUROCODE 2 - DESIGN OF CONCRETE STRUCTURES - PART 2: CONCRETE BRIDGES - DESIGN AND DETAILING RULES |
EN 1008:2002
|
Mixing water for concrete - Specification for sampling, testing and assessing the suitability of water, including water recovered from processes in the concrete industry, as mixing water for concrete |
EN 12504-2:2012
|
TESTING CONCRETE IN STRUCTURES - PART 2: NON-DESTRUCTIVE TESTING - DETERMINATION OF REBOUND NUMBER |
EN ISO 4628-4:2016
|
Paints and varnishes - Evaluation of degradation of coatings - Designation of quantity and size of defects, and of intensity of uniform changes in appearance - Part 4: Assessment of degree of cracking (ISO 4628-4:2016) |
ISO 4628-4:2016
|
Paints and varnishes Evaluation of degradation of coatings Designation of quantity and size of defects, and of intensity of uniform changes in appearance Part 4: Assessment of degree of cracking |
ISO 4628-3:2016
|
Paints and varnishes Evaluation of degradation of coatings Designation of quantity and size of defects, and of intensity of uniform changes in appearance Part 3: Assessment of degree of rusting |
EN ISO 4628-3:2016
|
Paints and varnishes - Evaluation of degradation of coatings - Designation of quantity and size of defects, and of intensity of uniform changes in appearance - Part 3: Assessment of degree of rusting (ISO 4628-3:2016) |
ISO 4624:2016
|
Paints and varnishes — Pull-off test for adhesion |
EN 12350-5:2009
|
Testing fresh concrete - Part 5: Flow table test |
ISO 4628-5:2016
|
Paints and varnishes — Evaluation of degradation of coatings — Designation of quantity and size of defects, and of intensity of uniform changes in appearance — Part 5: Assessment of degree of flaking |
ISO 4628-1:2016
|
Paints and varnishes Evaluation of degradation of coatings Designation of quantity and size of defects, and of intensity of uniform changes in appearance Part 1: General introduction and designation system |
CEN/TS 14038-2:2011
|
Electrochemical re-alkalization and chloride extraction treatments for rein-forced concrete - Part 2: Chloride extraction |
EN ISO 4628-6:2011
|
Paints and varnishes - Evaluation of degradation of coatings - Designation of quantity and size of defects, and of intensity of uniform changes in appearance - Part 6: Assessment of degree of chalking by tape method (ISO 4628-6:2011) |
EN 12390-1:2012
|
TESTING HARDENED CONCRETE - PART 1: SHAPE, DIMENSIONS AND OTHER REQUIREMENTS FOR SPECIMENS AND MOULDS |
EN 12504-4:2004
|
Testing concrete - Part 4: Determination of ultrasonic pulse velocity |
ISO 3274:1996
|
Geometrical Product Specifications (GPS) — Surface texture: Profile method — Nominal characteristics of contact (stylus) instruments |
EN 1992-1-2:2004/AC:2008
|
EUROCODE 2: DESIGN OF CONCRETE STRUCTURES - PART 1-2: GENERAL RULES - STRUCTURAL FIRE DESIGN |
EN 1504-2:2004
|
Products and systems for the protection and repair of concrete structures - Definitions, requirements, quality control and evaluation of conformity - Part 2: Surface protection systems for concrete |
EN 12390-2:2009
|
Testing hardened concrete - Part 2: Making and curing specimens for strength tests |
ASTM E 337 : 2015 : REDLINE
|
Standard Test Method for Measuring Humidity with a Psychrometer (the Measurement of Wet- and Dry-Bulb Temperatures) |
EN ISO 4624:2016
|
Paints and varnishes - Pull-off test for adhesion (ISO 4624:2016) |
EN ISO 12696:2016
|
Cathodic protection of steel in concrete (ISO 12696:2016) |
EN 13395-3:2002
|
Products and systems for the protection and repair of concrete structures - Test methods - Determination of workability - Part 3: Test for flow of repair concrete |
ISO 4628-6:2011
|
Paints and varnishes — Evaluation of degradation of coatings — Designation of quantity and size of defects, and of intensity of uniform changes in appearance — Part 6: Assessment of degree of chalking by tape method |
EN 12350-1:2009
|
Testing fresh concrete - Part 1: Sampling |
ASTM E 1728 : 2016 : REDLINE
|
Standard Practice for Collection of Settled Dust Samples Using Wipe Sampling Methods for Subsequent Lead Determination |
EN 1504-4:2004
|
Products and systems for the protection and repair of concrete structures - Definitions, requirements, quality control and evaluation of conformity - Part 4: Structural bonding |
EN ISO 8502-4:2017
|
Preparation of steel substrates before application of paints and related products - Tests for the assessment of surface cleanliness - Part 4: Guidance on the estimation of the probability of condensation prior to paint application (ISO 8502-4:2017) |
EN 1504-1:2005
|
Products and systems for the protection and repair of concrete structures - Definitions, requirements, quality control and evaluation of conformity - Part 1: Definitions |
EN 1504-8:2016
|
Products and systems for the protection and repair of concrete structures - Definitions, requirements, quality control and AVCP - Part 8: Quality control and Assessment and verification of the constancy of performance (AVCP) |
EN 14630:2006
|
Products and systems for the protection and repair of concrete structures - Test methods - Determination of carbonation depth in hardened concrete by the phenolphthalein method |
EN ISO 4628-5:2016
|
Paints and varnishes - Evaluation of degradation of coatings - Designation of quantity and size of defects, and of intensity of uniform changes in appearance - Part 5: Assessment of degree of flaking (ISO 4628-5:2016) |
EN 1062-3:2008
|
Paints and varnishes - Coating materials and coating systems for exterior masonry and concrete - Part 3: Determination of liquid water permeability |
EN ISO 8501-1:2007
|
Preparation of steel substrates before application of paints and related products - Visual assessment of surface cleanliness - Part 1: Rust grades and preparation grades of uncoated steel substrates and of steel substrates after overall removal of previous coatings (ISO 8501-1:2007) |
EN 1992-1-1:2004/A1:2014
|
EUROCODE 2: DESIGN OF CONCRETE STRUCTURES - PART 1-1: GENERAL RULES AND RULES FOR BUILDINGS |
EN 12350-7:2009
|
Testing fresh concrete - Part 7: Air content - Pressure methods |
CEN/TS 14038-1 : 2004
|
ELECTROCHEMICAL REALKALIZATION AND CHLORIDE EXTRACTION TREATMENTS FOR REINFORCED CONCRETE - PART 1: REALKALIZATION |
ISO 2409:2013
|
Paints and varnishes Cross-cut test |
EN 14629:2007
|
Products and systems for the protection and repair of concrete structures - Test methods - Determination of chloride content in hardened concrete |
EN 12504-1:2009
|
Testing concrete in structures - Part 1: Cored specimens - Taking, examining and testing in compression |
EN 1990:2002/A1:2005/AC:2010
|
EUROCODE - BASIS OF STRUCTURAL DESIGN |
EN 1766:2017
|
Products and systems for the protection and repair of concrete structures - Test methods - Reference concretes for testing |
EN 13395-4:2002
|
Products and systems for the protection and repair of concrete structures - Test methods - Determination of workability - Part 4: Application of repair mortar overhead |
ISO 12696:2016
|
Cathodic protection of steel in concrete |
EN 14487-1:2005
|
Sprayed concrete - Part 1: Definitions, specifications and conformity |
EN 1881:2006
|
Products and systems for the protection and repair of concrete structures - Test methods - Testing of anchoring products by the pull-out method |
EN 13670:2009
|
Execution of concrete structures |
EN ISO 3274 : 1997
|
GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - SURFACE TEXTURE: PROFILE METHOD - NOMINAL CHARACTERISTICS OF CONTACT (STYLUS) INSTRUMENTS |
EN 206:2013+A1:2016
|
Concrete - Specification, performance, production and conformity |
EN 1504-9:2008
|
Products and systems for the protection and repair of concrete structures - Definitions, requirements, quality control and evaluation of conformity - Part 9: General principles for the use of products and systems |
EN ISO 2808:2007
|
Paints and varnishes - Determination of film thickness (ISO 2808:2007) |
ISO 4628-2:2016
|
Paints and varnishes Evaluation of degradation of coatings Designation of quantity and size of defects, and of intensity of uniform changes in appearance Part 2: Assessment of degree of blistering |
EN 14487-2:2006
|
Sprayed concrete - Part 2: Execution |
EN 13395-1:2002
|
Products and systems for the protection and repair of concrete structures - Test methods - Determination of workability - Part 1: Test for flow of thixotropic mortars |