17/30353403 DC : 0
NA
Status of Standard is Unknown
BS EN 17097 - GEOSYNTHETICS - CHARACTERISTICS REQUIRED FOR USE IN SURFACE EROSION CONTROL ON SLOPES AND BANKS
Hardcopy , PDF
English
European foreword
Introduction
1 Scope
2 Normative references
3 Terms, definitions and abbreviations
4 Required characteristics and corresponding
methods of test
5 Assessment and verification of constancy of
performance (AVCP)
6 Marking
Annex A (normative) - Durability aspects
Annex B (normative) - Determination of thickness of erosion
control products
Annex C (normative) - Determination of rebound resilience
of erosion control products
Annex D (normative) - Behaviour of erosion control products
at low and elevated temperatures
Annex E (normative) - Determination of opening size of
erosion control products
Annex F (normative) - Determination of turf-filling ratioof
erosion control products
Annex G (normative) - Determination of water absorption
capacity of erosion control products - Immersion method
Annex H (normative) - Determination of smoulder resistance of
erosion control products
Annex I (normative) - Environmental harmlessness test of
erosion control products
Annex ZA (informative) - Relationship of this European
Standard with Regulation (EU) No. 305/2011
Bibliography
BS EN 17097.
| Committee |
B/553
|
| DocumentType |
Draft
|
| Pages |
63
|
| PublisherName |
British Standards Institution
|
| Status |
NA
|
| Standards | Relationship |
| PREN 17097 : DRAFT 2017 | Identical |
| EN ISO 14021:2016 | Environmental labels and declarations - Self-declared environmental claims (Type II environmental labelling) (ISO 14021:2016) |
| EN 12226:2012 | Geosynthetics - General tests for evaluation following durability testing |
| ISO 3310-1:2016 | Test sieves — Technical requirements and testing — Part 1: Test sieves of metal wire cloth |
| EN 15933:2012 | Sludge, treated biowaste and soil - Determination of pH |
| ISO 13438:2004 | Geotextiles and geotextile-related products — Screening test method for determining the resistance to oxidation |
| ISO 12956:2010 | Geotextiles and geotextile-related products — Determination of the characteristic opening size |
| EN ISO 10319:2015 | Geosynthetics - Wide-width tensile test (ISO 10319:2015) |
| EN ISO 13426-2:2005 | Geotextiles and geotextile-related products - Strength of internal structural junctions - Part 2: Geocomposites (ISO 13426-2:2005) |
| ISO 10320:1999 | Geotextiles and geotextile-related products — Identification on site |
| ISO 9863-1:2016 | Geosynthetics — Determination of thickness at specified pressures — Part 1: Single layers |
| EN 1848-2:2001 | Flexible sheets for waterproofing - Determination of length, width, straightness and flatness - Part 2: Plastic and rubber sheets for roof waterproofing |
| EN ISO 13426-1:2003 | Geotextiles and geotextile-related products - Strength of internal structural junctions - Part 1: Geocells (ISO 13426-1:2003) |
| ISO 25619-2:2015 | Geosynthetics — Determination of compression behaviour — Part 2: Determination of short-term compression behaviour |
| EN ISO 25619-2:2015 | Geosynthetics - Determination of compression behaviour - Part 2: Determination of short-term compression behaviour (ISO 25619-2:2015) |
| ISO 10319:2015 | Geosynthetics — Wide-width tensile test |
| ISO 14021:2016 | Environmental labels and declarations — Self-declared environmental claims (Type II environmental labelling) |
| ISO 565:1990 | Test sieves — Metal wire cloth, perforated metal plate and electroformed sheet — Nominal sizes of openings |
| EN 1484:1997 | Water analysis - Guidelines for the determination of total organic carbon (TOC) and dissolved organic carbon (DOC) |
| ISO 11925-2:2010 | Reaction to fire tests — Ignitability of products subjected to direct impingement of flame — Part 2: Single-flame source test |
| EN 12224:2000 | Geotextiles and geotextile-related products - Determination of the resistance to weathering |
| CEN/TR 15019:2005 | Geotextiles and geotextile-related products - On-site quality control |
| ISO 13426-2:2005 | Geotextiles and geotextile-related products — Strength of internal structural junctions — Part 2: Geocomposites |
| ISO 9862:2005 | Geosynthetics — Sampling and preparation of test specimens |
| EN ISO 10320:1999 | Geotextiles and geotextile-related products - Identification on site (ISO 10320:1999) |
| ISO/TS 13434:2008 | Geosynthetics — Guidelines for the assessment of durability |
| EN 1744-3:2002 | Tests for chemical properties of aggregates - Part 3: Preparation of eluates by leaching of aggregates |
| EN ISO 10318-1:2015 | Geosynthetics - Part 1: Terms and definitions (ISO 10318-1:2015) |
| EN ISO 11058:2010 | Geotextiles and geotextile-related products - Determination of water permeability characteristics normal to the plane, without load (ISO 11058:2010) |
| EN ISO 9001:2015 | Quality management systems - Requirements (ISO 9001:2015) |
| ISO/TR 12960:1998 | Geotextiles and geotextile-related products — Screening test method for determining the resistance to liquids |
| ISO 11058:2010 | Geotextiles and geotextile-related products — Determination of water permeability characteristics normal to the plane, without load |
| ISO 13426-1:2003 | Geotextiles and geotextile-related products — Strength of internal structural junctions — Part 1: Geocells |
| EN 12225:2000 | Geotextiles and geotextile-related products - Method for determining the microbiological resistance by a soil burial test |
| ASTM D 7409 : 2015 : REDLINE | Standard Test Method for Carboxyl End Group Content of Polyethylene Terephthalate (PET) Yarns |
| ISO 291:2008 | Plastics — Standard atmospheres for conditioning and testing |
| EN ISO 9864:2005 | Geosynthetics - Test method for the determination of mass per unit area of geotextiles and geotextile-related products (ISO 9864:2005) |
| EN ISO 9863-1:2016 | Geosynthetics - Determination of thickness at specified pressures - Part 1: Single layers (ISO 9863-1:2016) |
| EN 12457-1:2002 | Characterisation of waste - Leaching - Compliance test for leaching of granular waste materials and sludges - Part 1: One stage batch test at a liquid to solid ratio of 2 l/kg for materials with high solid content and with particle size below 4 mm (without or with size reduction) |
| ISO 9001:2015 | Quality management systems — Requirements |
| ISO 3696:1987 | Water for analytical laboratory use — Specification and test methods |
| EN ISO 291:2008 | Plastics - Standard atmospheres for conditioning and testing (ISO 291:2008) |
| EN ISO 3696:1995 | Water for analytical laboratory use - Specification and test methods (ISO 3696:1987) |
| ISO 1043-1:2011 | Plastics — Symbols and abbreviated terms — Part 1: Basic polymers and their special characteristics |
| EN 12447:2001 | Geotextiles and geotextile-related products - Screening test method for determining the resistance to hydrolysis in water |
| EN ISO 12956:2010 | Geotextiles and geotextile-related products - Determination of the characteristic opening size (ISO 12956:2010) |
| ISO 9864:2005 | Geosynthetics — Test method for the determination of mass per unit area of geotextiles and geotextile-related products |
| EN ISO 9862:2005 | Geosynthetics - Sampling and preparation of test specimens (ISO 9862:2005) |
| CEN/TS 14416:2014 | Geosynthetic barriers - Test method for determining the resistance to roots |
| ISO 856:2006 | Oil of peppermint (Mentha x piperita L.) |
Access your standards online with a subscription
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.
Important note : Users cannot be edited or removed once added to your Multi user PDF.