89/686/EEC : 1989 AMD 5 2012

Superseded

Superseded A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

View superseded by

COUNCIL DIRECTIVE OF 21 DECEMBER 1989 ON THE APPROXIMATION OF THE LAWS OF THE MEMBER STATES RELATING TO PERSONAL PROTECTIVE EQUIPMENT

Available format(s):

Superseded date: 09-03-2016

Language(s):

Published date: 12-01-2013

Publisher: European Union

Abstract - (Show below) - (Hide below)

Objective is to remove barriers to trade between Member States in personal protective equipment (PPE) by harmonizing basic requirements for the design, manufacture, testing and certification of these goods, while maintaining the highest possible level of safety. PPE means any device or appliance designed to be worn or held by an individual for protection against one or more safety and health hazards. The Directive applies to all PPE intended for professional and private use (sport, leisure, domestic use ) except PPE covered by another Directive with the same objectives.

General Product Information - (Show below) - (Hide below)

Development Note	Superseded by 2016/425/EU, but remains valid until 20/04/2018. (09/2017)
Document Type	Miscellaneous Product
ISBN
Pages
Published
Publisher	European Union
Status	Superseded
Superseded By	2016/425/EU : 2016

Standards Referenced By This Book - (Show below) - (Hide below)

10/30207275 DC : 0	BS 8468-6.1 - RESPIRATORY PROTECTIVE DEVICES FOR USE AGAINST CHEMICAL, BIOLOGICAL, RADIOLOGICAL AND NUCLEAR (CBRN) AGENTS - PART 6.1: POSITIVE-PRESSURE COMPRESSED AIRLINE EQUIPMENT - SPECIFICATION
BS EN 13277-7:2009	PROTECTIVE EQUIPMENT FOR MARTIAL ARTS - PART 7: ADDITIONAL REQUIREMENTS AND TEST METHODS FOR HAND AND FOOT PROTECTORS
S.R. CEN/TR 1030-2:2016	HAND-ARM VIBRATION - GUIDELINES FOR VIBRATION HAZARDS REDUCTION - PART 2: MANAGEMENT MEASURES AT THE WORKPLACE
15/30303027 DC : 0	BS EN ISO 27065 - PROTECTIVE CLOTHING - PERFORMANCE REQUIREMENTS FOR PROTECTIVE CLOTHING WORN BY OPERATORS APPLYING LIQUID PESTICIDES AND FOR RE-ENTRY WORKERS
NF CR 13033 : 98 FD	PERSONAL PROTECTIVE EQUIPMENT - LIFEJACKETS AND BUOYANCY AIDS - GUIDE FOR SELECTION AND USE
NF EN 363 : 2008	PERSONAL FALL PROTECTION EQUIPMENT - PERSONAL FALL PROTECTION SYSTEMS
BS EN ISO 12312-2:2015	Eye and face protection. Sunglasses and related eyewear Filters for direct observation of the sun
BS EN ISO 12127-1:2015	Clothing to protect against heat and flame. Determination of contact heat transmission through clothing or constituent materials Contact heat produced by heating cylinder
I.S. EN 136:1998	RESPIRATORY PROTECTIVE DEVICES - FULL-FACE MASKS - REQUIREMENTS, TESTING, MARKING
11/30239230 DC : DRAFT MAR 2011	BS EN ISO 14116 - PROTECTIVE CLOTHING - PROTECTION AGAINST HEAT AND FLAME - LIMITED FLAME SPREAD MATERIALS, MATERIAL ASSEMBLIES AND CLOTHING
NF EN 13277-7 : 2009	PROTECTIVE EQUIPMENT FOR MARTIAL ARTS - PART 7: ADDITIONAL REQUIREMENTS AND TEST METHODS FOR HAND AND FOOT PROTECTORS
PD CEN/TR 1030-2:2016	Hand-arm vibration. Guidelines for vibration hazards reduction Management measures at the workplace
BS EN ISO 17491-4 : 2008	PROTECTIVE CLOTHING - TEST METHODS FOR CLOTHING PROVIDING PROTECTION AGAINST CHEMICALS - PART 4: DETERMINATION OF RESISTANCE TO PENETRATION BY A SPRAY OF LIQUID (SPRAY TEST) (ISO 17491-4:2008)
PREN 1127-1 : DRAFT 2017	EXPLOSIVE ATMOSPHERES - EXPLOSION PREVENTION AND PROTECTION - PART 1: BASIC CONCEPTS AND METHODOLOGY
PD CEN/TR 16386:2013	Dentistry. Guidelines for handling methacrylate-based materials in the dental laboratory
12/30256100 DC : 0	BS EN 12878 - PIGMENTS FOR THE COLOURING OF BUILDING MATERIALS BASED ON CEMENT AND/OR LIME - SPECIFICATIONS AND METHODS OF TEST
09/30204814 DC : 0	BS EN 374-1 - PROTECTIVE GLOVES AGAINST CHEMICALS AND MICRO-ORGANISMS - PART 1: TERMINOLOGY AND PERFORMANCE REQUIREMENTS
14/30293500 DC : 0	BS EN 14225-3 - DIVING SUITS - PART 3: ACTIVELY HEATED OR COOLED SUIT SYSTEMS AND COMPONENTS - REQUIREMENTS AND TEST METHODS
PREN 564 : DRAFT 2013	MOUNTAINEERING EQUIPMENT - ACCESSORY CORD - SAFETY REQUIREMENTS AND TEST METHODS
10/30196552 DC : 0	BS EN ISO 15027-2 - IMMERSION SUITS - PART 2: ABANDONMENT SUITS, REQUIREMENTS INCLUDING SAFETY
PREN 374-1 : DRAFT 2009	PROTECTIVE GLOVES AGAINST CHEMICALS AND MICRO-ORGANISMS - PART 1: TERMINOLOGY AND PERFORMANCE REQUIREMENTS
S.R. CEN/TR 15419:2017	PROTECTIVE CLOTHING - GUIDELINES FOR SELECTION, USE, CARE AND MAINTENANCE OF CHEMICAL PROTECTIVE CLOTHING
16/30341178 DC : 0	BS EN ISO 11393-3 - PROTECTIVE CLOTHING FOR USERS OF HAND-HELD CHAIN-SAWS - PART 3: TEST METHODS FOR FOOTWEAR
FD S70 100 : 2007 FD	PERSONAL PROTECTIVE EQUIPMENT (PPE) - GUIDE FOR DRAFTING THE INFORMATION TO BE SUPPLIED BY THE MANUFACTURERS TO THE USERS IN COMPLIANCE WITH DIRECTIVE 89/686/EEC
BS 8467:2006	Protective clothing. Personal protective ensembles for use against chemical, biological, radiological and nuclear (CBRN) agents. Categorization, performance requirements and test methods
10/30216633 DC : 0	BS EN 1621-1 - MOTORCYCLISTS' PROTECTIVE CLOTHING AGAINST MECHANICAL IMPACT - PART 1: MOTORCYCLISTS' LIMB JOINT IMPACT PROTECTORS - REQUIREMENTS AND TEST METHODS
BS 8608:2014	Specification for radio telemetry systems for use with respiratory protective devices used by emergency first responders
00/563154 DC : DRAFT JUL 2000	PREN ISO 12402-5 - PERSONAL FLOTATION DEVICES - PART 5: CLASS E (BUOYANCY AIDS - 50 N), SAFETY REQUIREMENTS
BS EN ISO 374-1 : 2016	PROTECTIVE GLOVES AGAINST DANGEROUS CHEMICALS AND MICRO-ORGANISMS - PART 1: TERMINOLOGY AND PERFORMANCE REQUIREMENTS FOR CHEMICAL RISKS (ISO 374-1:2016)
12/30270980 DC : 0	BS EN 1127-2 - EXPLOSIVE ATMOSPHERES - EXPLOSION PREVENTION AND PROTECTION - PART 2: BASIC CONCEPTS AND METHODOLOGY FOR MINING
12/30260502 DC : 0	BS EN 16448-2 - PROTECTIVE CLOTHING - BODY ARMOUR - PART 2: BULLET RESISTANCE - REQUIREMENTS AND TEST METHODS
BS EN ISO 13688:2013	Protective clothing. General requirements
BS EN ISO 11612:2015	Protective clothing. Clothing to protect against heat and flame. Minimum performance requirements
00/562463 DC : DRAFT MAY 2000	PREN ISO 12402-3 - PERSONAL FLOTATION DEVICES - PART 3: CLASS C (OFFSHORE LIFEJACKETS - 150 N), SAFETY REQUIREMENTS
04/30095069 DC : 0	BS EN 443 - FIREFIGHTERS HELMETS
15/30322058 DC : 0	BS EN 958 - MOUNTAINEERING EQUIPMENT - ENERGY ABSORBING SYSTEMS FOR USE IN KLETTERSTEIG (VIA FERRATA) CLIMBING - SAFETY REQUIREMENTS AND TEST METHODS
03/115243 DC : DRAFT OCT 2003	PR BS EN 511 - PROTECTIVE GLOVES AGAINST COLD
03/115242 DC : DRAFT OCT 2003	BS EN 14786 - PROTECTIVE CLOTHING - DETERMINATION OF RESISTANCE TO PENETRATION BY SPRAYED LIQUID CHEMICALS, EMULSIONS AND DISPERSIONS - ATOMIZER TEST
15/30296817 DC : 0	BS EN ISO 10256-2 - PROTECTIVE EQUIPMENT FOR USE IN ICE HOCKEY - PART 2: HEAD PROTECTION FOR SKATERS
05/30128013 DC : DRAFT JULY 2005	BS 5655-12 - LIFTS AND SERVICE LIFTS - PART 12: CODE OF PRACTICE FOR THE UNDERTAKING OF MODIFICATIONS TO EXISTING HYDRAULIC LIFTS
BS 7971-1:2002	PROTECTIVE CLOTHING AND EQUIPMENT FOR USE IN VIOLENT SITUATIONS AND IN TRAINING - PART 1: GENERAL REQUIREMENTS
09/30200151 DC : 0	BS EN ISO 20346 - PERSONAL PROTECTIVE EQUIPMENT - PROTECTIVE FOOTWEAR
BS 8468-2:2006	RESPIRATORY PROTECTIVE DEVICES FOR USE AGAINST CHEMICAL, BIOLOGICAL, RADIOLOGICAL AND NUCLEAR (CBRN) AGENTS - PART 2: NEGATIVE PRESSURE, AIR PURIFYING DEVICES WITH FULL FACE MASK - SPECIFICATION
I.S. 355:2006	SPECIFICATION FOR HELMETS FOR HURLING AND CAMOGIE PLAYERS
PD CLC/TR 60079-32-1:2015	EXPLOSIVE ATMOSPHERES - PART 32-1: ELECTROSTATIC HAZARDS - GUIDANCE
BS EN 148-1:1999	RESPIRATORY PROTECTIVE DEVICES: THREADS FOR FACEPIECES - STANDARD THREAD CONNECTION
17/30360256 DC : 0	BS EN 15288-2 - SWIMMING POOLS - PART 2: SAFETY REQUIREMENTS FOR OPERATION
17/30365866 DC : 0	BS EN 1127-1 - EXPLOSIVE ATMOSPHERES - EXPLOSION PREVENTION AND PROTECTION - PART 1: BASIC CONCEPTS AND METHODOLOGY
16/30338920 DC : 0	BS EN 14325 - PROTECTIVE CLOTHING AGAINST CHEMICALS - TEST METHODS AND PERFORMANCE CLASSIFICATION OF CHEMICAL PROTECTIVE CLOTHING MATERIALS, SEAMS, JOINS AND ASSEMBLAGES
S.R. CEN TR 14560:2003	GUIDANCE FOR SELECTION, USE, CARE AND MAINTENANCE OF PROTECTIVE CLOTHING AGAINST HEAT AND FLAME
NF EN 13595-1 : 2003	PROTECTIVE CLOTHING FOR PROFESSIONAL MOTORCYCLE RIDERS - JACKETS, TROUSERS AND ONE-PIECE OR DIVIDED SUITS - PART 1: GENERAL REQUIREMENTS
NF EN 13819-2 : 2003	HEARING PROTECTORS - TESTING - PART 2: ACOUSTIC TEST METHODS
NF EN 15614 : 2007	PROTECTIVE CLOTHING FOR FIREFIGHTERS - LABORATORY TEST METHODS AND PERFORMANCE REQUIREMENTS FOR WILDLAND CLOTHING
NF EN 352-7 : 2003	HEARING PROTECTORS - SAFETY REQUIREMENTS AND TESTING - PART 7: LEVEL-DEPENDANT EAR-PLUGS
NF EN 352-6 : 2003	HEARING PROTECTORS - SAFETY REQUIREMENTS AND TESTING - PART 6: EAR-MUFFS WITH ELECTRICAL AUDIO INPUT
EN 15567-1:2015	Sports and recreational facilities - Ropes courses - Part 1: Construction and safety requirements
NF EN 13034 : 2005 + A1 2009	PROTECTIVE CLOTHING AGAINST LIQUID CHEMICALS - PERFORMANCE REQUIREMENTS FOR CHEMICAL PROTECTIVE CLOTHING OFFERING LIMITED PROTECTIVE PERFORMANCE AGAINST LIQUID CHEMICALS (TYPE 6 AND TYPE PB [6] EQUIPMENT)
BS EN 863:1996	PROTECTIVE CLOTHING - MECHANICAL PROPERTIES - TEST METHOD: PUNCTURE RESISTANCE
BS EN ISO 12402-7 : 2007	PERSONAL FLOTATION DEVICES - PART 7: MATERIALS AND COMPONENTS - SAFETY REQUIREMENTS AND TEST METHODS
BS EN 15567-2:2015	SPORTS AND RECREATIONAL FACILITIES - ROPES COURSES - PART 2: OPERATION REQUIREMENTS
BS EN 13641:2002	Elimination or reduction of risk of infection related to in vitro diagnostic reagents
BS EN 12094-2:2003	Fixed firefighting systems. Components for gas extinguishing systems Requirements and test methods for non-electrical automatic control and delay devices
BS EN 813:1997	PERSONAL FALL PROTECTION EQUIPMENT - SIT HARNESSES
BS EN 352-5:2002	Hearing protectors. Safety requirements and testing Active noise reduction ear muffs
BS EN ISO 15027-3:2012	Immersion suits Test methods
BS EN ISO 10256:2003	HEAD AND FACE PROTECTION FOR USE IN ICE HOCKEY
BS EN 172:1995	Specification for sunglare filters used in personal eye-protectors for industrial use
BS EN ISO 13982-2:2004	Protective clothing for use against solid particulates Test method of determination of inward leakage of aerosols of fine particles into suits
UNE-EN 1127-1:2012	Explosive atmospheres - Explosion prevention and protection - Part 1: Basic concepts and methodology
BS EN 14360:2004	Protective clothing against rain. Test method for ready made garments. Impact from above with high energy droplets
BS EN 142:2002	Respiratory protective devices. Mouthpiece assemblies. Requirements, testing, marking
BS EN 374-3:2003	Protective gloves against chemicals and micro-organisms Determination of resistance to permeation by chemicals
ISO 12402-7:2006	Personal flotation devices Part 7: Materials and components Safety requirements and test methods
BS EN 420 : 2003	PROTECTIVE GLOVES - GENERAL REQUIREMENTS AND TEST METHODS
BS EN 354:2010	Personal fall protection equipment. Lanyards
BS EN 13781:2012	Protective helmets for drivers and passengers of snowmobiles and bobsleighs
ISO 20349:2010	Personal protective equipment Footwear protecting against thermal risks and molten metal splashes as found in foundries and welding Requirements and test method
BS EN 361:2002	PERSONAL PROTECTIVE EQUIPMENT AGAINST FALLS FROM A HEIGHT - FULL BODY HARNESS
BS EN 1149-3:2004	Protective clothing. Electrostatic properties Test methods for measurement of charge decay
BS EN 14605 : 2005	PROTECTIVE CLOTHING AGAINST LIQUID CHEMICALS - PERFORMANCE REQUIREMENTS FOR CLOTHING WITH LIQUID-TIGHT (TYPE 3) OR SPRAY-TIGHT (TYPE 4) CONNECTIONS, INCLUDING ITEMS PROVIDING PROTECTION TO PARTS OF THE BODY ONLY (TYPES PB [3] AND PB [4])
BS EN 13595-1:2002	Protective clothing for professional motorcycle riders. Jackets, trousers and one piece or divided suits General requirements
BS EN 13484:2012	Helmets for users of luges
ISO 6942:2002	Protective clothing — Protection against heat and fire — Method of test: Evaluation of materials and material assemblies when exposed to a source of radiant heat
BS EN 12094-8:2006	Fixed firefighting systems. Components for gas extinguishing systems Requirements and test methods for connectors
BS EN 353-2:2002	PERSONAL PROTECTIVE EQUIPMENT AGAINST FALLS FROM A HEIGHT - PART 2: GUIDED TYPE FALL ARRESTERS INCLUDING A FLEXIBLE ANCHOR LINE
BS EN 374-1:2003	Protective gloves against chemicals and micro-organisms Terminology and performance requirements
BS EN 352-3:2002	Hearing protectors. Safety requirements and testing Ear-muffs attached to an industrial safety helmet
BS EN 893:2010	MOUNTAINEERING EQUIPMENT - CRAMPONS - SAFETY REQUIREMENTS AND TEST METHODS
BS EN 966 : 2012	HELMETS FOR AIRBORNE SPORTS
BS EN 12492:2012	Mountaineering equipment. Helmets for mountaineers. Safety requirements and test methods
I.S. EN 14126:2003+AC:2004	PROTECTIVE CLOTHING - PERFORMANCE REQUIREMENTS AND TESTS METHODS FOR PROTECTIVE CLOTHING AGAINST INFECTIVE AGENTS
BS EN 13087-4:2012	Protective helmets. Test methods Retention system effectiveness
BS EN 12270:2013	Mountaineering equipment. Chocks. Safety requirements and test methods
BS EN 13819-1:2002	Hearing protectors. Testing Physical test methods
BS EN 14021:2003	Stone shields for off-road motorcycling suited to protect riders against stones and debris. Requirements and test methods
BS EN 1497:2007	Personal fall protection equipment. Rescue harnesses
BS EN 14404 : 2004	PERSONAL PROTECTIVE EQUIPMENT - KNEE PROTECTORS FOR WORK IN THE KNEELING POSITION
BS EN ISO 20346:2014	Personal protective equipment. Protective footwear
BS EN 360:2002	Personal protective equipment against falls from a height. Retractable type fall arresters
DIN EN 1127-2:2002-07	EXPLOSIVE ATMOSPHERES - EXPLOSION PREVENTION AND PROTECTION - PART 2: BASIC CONCEPTS AND METHODOLOGY FOR MINING
EN 1078:2012+A1:2012	Helmets for pedal cyclists and for users of skateboards and roller skates
CEN/TR 1030-2:2016	Hand-arm vibration - Guidelines for vibration hazards reduction - Part 2: Management measures at the workplace
EN 1077:2007	Helmets for alpine skiers and snowboarders
EN 13087-10:2012	Protective helmets - Test methods - Part 10: Resistance to radiant heat
EN 13087-1:2000/A1:2001	PROTECTIVE HELMETS - TEST METHODS - PART 1: CONDITIONS AND CONDITIONING
EN 13087-6:2012	Protective helmets - Test methods - Part 6: Field of vision
EN 12275:2013	Mountaineering equipment - Connectors - Safety requirements and test methods
EN 12941:1998/A2:2008	RESPIRATORY PROTECTIVE DEVICES - POWERED FILTERING DEVICES INCORPORATING A HELMET OR A HOOD - REQUIREMENTS, TESTING, MARKING
EN 13034:2005+A1:2009	Protective clothing against liquid chemicals - Performance requirements for chemical protective clothing offering limited protective performance against liquid chemicals (Type 6 and Type PB [6] equipment)
EN ISO 12401:2009	Small craft - Deck safety harness and safety line - Safety requirements and test methods (ISO 12401:2009)
EN 1149-3:2004	Protective clothing - Electrostatic properties - Part 3: Test methods for measurement of charge decay
EN 12278:2007	Montaineering equipment - Pulleys - Safety requirements and test methods
EN 12477:2001/A1:2005	PROTECTIVE GLOVES FOR WELDERS
EN 13087-2:2012	Protective helmets - Test methods - Part 2: Shock absorption
EN 13546:2002+A1:2007	Protective clothing - Hand, arm, chest, abdomen, leg, foot and genital protectors for field hockey goal keepers, and shin protectors for field players - Requirements and test methods
EN 1005-1:2001+A1:2008	Safety of machinery - Human physical performance - Part 1: Terms and definitions
NF EN 381-10 : 2003	PROTECTIVE CLOTHING FOR USERS OF HAND-HELD CHAINSAWS - PART 10: TEST METHOD FOR UPPER BODY PROTECTORS
EN 133:2001	Respiratory protective devices - Classification
EN 13277-4:2001/A1:2007	PROTECTIVE EQUIPMENT FOR MARTIAL ARTS - PART 4: ADDITIONAL REQUIREMENTS AND TEST METHODS FOR HEAD PROTECTORS
EN 13089:2011+A1:2015	Mountaineering equipment - Ice-tools - Safety requirements and test methods
EN 13567:2002+A1:2007	Protective clothing - Hand, arm, chest, abdomen, leg, genital and face protectors for fencers - Requirements and test methods
EN 12094-2:2003	Fixed firefighting systems - Components for gas extinguishing systems - Part 2: Requirements and test methods for non-electrical automatic control and delay devices
EN 13087-5:2012	Protective helmets - Test methods - Part 5: Retention system strength
EN 12021:2014	Respiratory equipment - Compressed gases for breathing apparatus
EN 12094-8:2006	Fixed firefighting systems - Components for gas extinguishing systems - Part 8: Requirements and test methods for connectors
EN 13794:2002	Respiratory protective devices - Self-contained closed-circuit breathing apparatus for escape - Requirements, testing, marking
PD ISO/TR 2801:2007	Clothing for protection against heat and flame. General recommendations for selection, care and use of protective clothing
BS EN 15288-2:2008	Swimming pools Safety requirements for operation
12/30268236 DC	BS EN 943-2. Protective clothing against solid, liquid and gaseous chemicals, including liquid and solid aerosols. Performance requirements for gas-tight (Type 1) chemical protective suits for emergency teams (ET)
BS EN 12277 : 2015	MOUNTAINEERING EQUIPMENT - HARNESSES - SAFETY REQUIREMENTS AND TEST METHODS
16/30332885 DC : 0	BS EN 342 - PROTECTIVE CLOTHING - ENSEMBLES AND GARMENTS FOR PROTECTION AGAINST COLD
13/30279677 DC : 0	BS EN 15567-1 - SPORTS AND RECREATIONAL FACILITIES - ROPES COURSES - PART 1: CONSTRUCTION AND SAFETY REQUIREMENTS
BS EN 60903:2003	Live working. Gloves of insulating material
12/30271676 DC : 0	BS EN 353-1 - REV PERSONAL FALL PROTECTION EQUIPMENT - GUIDED TYPE FALL ARRESTERS INCLUDING AN ANCHOR LINE - PART 1: GUIDED TYPE FALL ARRESTERS INCLUDING A RIGID ANCHOR LINE
BS EN 16805:2015	Diving equipment. Diving mask. Requirements and test methods
10/30236372 DC : 0	BS EN 12276 - MOUNTAINEERING EQUIPMENT - FRICTIONAL ANCHORS - SAFETY REQUIREMENTS AND TEST METHODS
15/30256940 DC : 0	BS EN ISO 10256-1 - PROTECTIVE EQUIPMENT FOR USE IN ICE HOCKEY - PART 1: GENERAL REQUIREMENTS
PREN 958 : DRAFT 2015	METHODSNEERING EQUIPMENT - ENERGY ABSORBING SYSTEMS FOR USE IN KLETTERSTEIG (VIA FERRATA) CLIMBING - SAFETY REQUIREMENTS AND TEST METHODS
BS EN 1149-5:2008	Protective clothing. Electrostatic properties Material performance and design requirements
14/30310789 DC : 0	BS EN 565 - MOUNTAINEERING EQUIPMENT - TAPE - SAFETY REQUIREMENTS AND TEST METHODS
15/30324466 DC : 0	BS EN 16716 - MOUNTAINEERING EQUIPMENT - AVALANCHE AIRBAG SYSTEMS - SAFETY REQUIREMENTS AND TEST METHODS
10/30234587 DC : 0	BS 8468-5 - RESPIRATORY PROTECTIVE DEVICES FOR USE AGAINST CHEMICAL, BIOLOGICAL, RADIOLOGICAL AND NUCLEAR (CBRN) AGENTS - PART 5: DUAL-MODE APPARATUS - SPECIFICATION
BS EN 1621-4:2013	Motorcyclists\' protective clothing against mechanical impact Motorcyclists\' inflatable protectors. Requirements and test methods
06/30156009 DC : DRAFT SEP 2006	BS EN 13921 - PERSONAL PROTECTIVE EQUIPMENT - ERGONOMIC PRINCIPLES
12/30254411 DC : 0	BS EN 13138-1 - BUOYANT AIDS FOR SWIMMING INSTRUCTION - PART 1: SAFETY REQUIREMENTS AND TEST METHODS FOR BUOYANT AIDS TO BE WORN
BS EN ISO 25649-1:2017	Floating leisure articles for use on and in the water Classification, materials, general requirements and test methods
BS EN ISO 20349 : 2010	PERSONAL PROTECTIVE EQUIPMENT - FOOTWEAR PROTECTING AGAINST THERMAL RISKS AND MOLTEN METAL SPLASHES AS FOUND IN FOUNDRIES AND WELDING - REQUIREMENTS AND TEST METHOD
06/30157890 DC : 0	BS EN 50496 - DETERMINATION OF WORKERS' EXPOSURE TO ELECTROMAGNETIC FIELDS AND ASSESSMENT OF RISK AT A BROADCAST SITE
BS EN ISO 10256-1:2016	Protective equipment for use in ice hockey General requirements
EN ISO 374-1:2016	Protective gloves against dangerous chemicals and micro-organisms - Part 1: Terminology and performance requirements for chemical risks (ISO 374-1:2016)
PREN 892 : DRAFT 2011	MOUNTAINEERING EQUIPMENT - DYNAMIC MOUNTAINEERING ROPES - SAFETY REQUIREMENTS AND TEST METHODS
16/30347802 DC : 0	BS EN 1149-5 - PROTECTIVE CLOTHING - ELECTROSTATIC PROPERTIES - PART 5: MATERIAL PERFORMANCE AND DESIGN REQUIREMENTS
BS 7373-2:2001	Product specifications Guide to identifying criteria for a product specification and to declaring product conformity
15/30313584 DC : 0	BS ISO 25649-1 - FLOATING LEISURE ARTICLES FOR USE ON AND IN THE WATER - PART 1: CLASSIFICATION, MATERIALS, GENERAL REQUIREMENTS AND TEST METHODS
BS EN ISO 12401:2009	Small craft. Deck safety harness and safety line. Safety requirements and test methods
PREN 565 : DRAFT 2014	MOUNTAINEERING EQUIPMENT - TAPE - SAFETY REQUIREMENTS AND TEST METHODS
04/30095730 DC : DRAFT APR 2004	EN 13832-3 - FOOTWEAR PROTECTING AGAINST CHEMICALS AND MICRO-ORGANISMS - PART 3: FOOTWEAR HIGHLY PROTECTIVE AGAINST CHEMICALS
BS EN 16716:2017	Mountaineering equipment. Avalanche airbag systems. Safety requirements and test methods
15/30296827 DC : 0	BS EN ISO 10256-4 - PROTECTIVE EQUIPMENT FOR USE IN ICE HOCKEY - PART 4: HEAD AND FACE PROTECTION FOR GOALKEEPERS
PREN 13911 : DRAFT 2013	PROTECTIVE CLOTHING FOR FIREFIGHTERS - REQUIREMENTS AND TEST METHODS FOR FIRE HOODS FOR FIREFIGHTERS
BS EN ISO 374-5:2016	Protective gloves against dangerous chemicals and micro-organisms Terminology and performance requirements for micro-organisms risks
09/30200146 DC : 0	BS EN ISO 20344 - PERSONAL PROTECTIVE EQUIPMENT - TEST METHODS FOR FOOTWEAR
BS EN ISO 20471 : 2013	HIGH VISIBILITY CLOTHING - TEST METHODS AND REQUIREMENTS (ISO 20471:2013)
PREN 943-2 : DRAFT 2016	PROTECTIVE CLOTHING AGAINST DANGEROUS SOLID, LIQUID AND GASEOUS CHEMICALS, INCLUDING LIQUID AND SOLID AEROSOLS - PART 2: PERFORMANCE REQUIREMENTS FOR TYPE 1 (GAS-TIGHT) CHEMICAL PROTECTIVE SUITS FOR EMERGENCY TEAMS (ET)
PREN 342 : DRAFT 2016	PROTECTIVE CLOTHING - ENSEMBLES AND GARMENTS FOR PROTECTION AGAINST COLD
13/30282890 DC : 0	BS EN 564 - MOUNTAINEERING EQUIPMENT - ACCESSORY CORD - SAFETY REQUIREMENTS AND TEST METHODS
00/562571 DC : DRAFT JUN 2000	BS EN 13921-4 - PERSONAL PROTECTIVE EQUIPMENT - ERGONOMIC PRINCIPLES - PART 4: THERMAL CHARACTERISTICS
12/30265636 DC : 0	BS ISO 20346 - PERSONAL PROTECTIVE EQUIPMENT - PROTECTIVE FOOTWEAR
BS EN 15333-1:2008	RESPIRATORY EQUIPMENT - OPEN-CIRCUIT UMBILICAL SUPPLIED COMPRESSED GAS DIVING APPARATUS - PART 1: DEMAND APPARATUS
04/30095724 DC : DRAFT APR 2004	EN 13832-1 - FOOTWEAR PROTECTING AGAINST CHEMICALS AND MICRO-ORGANISMS - PART 1: TERMINOLOGY AND TEST METHODS
05/30127970 DC : DRAFT JAN 2005	EN 1127-1 - EXPLOSIVE ATMOSPHERES - EXPLOSION PREVENTION AND PROTECTION - PART 1: BASIC CONCEPTS AND METHODOLOGY
PD CEN/TR 15321:2006	GUIDELINES ON THE SELECTION, USE, CARE AND MAINTENANCE OF PROTECTIVE CLOTHING
UNE-EN 16716:2017	Mountaineering equipment - Avalanche Airbag systems - Safety requirements and test methods
S.R. CLC/TR 60079-32-1:2015	EXPLOSIVE ATMOSPHERES - PART 32-1: ELECTROSTATIC HAZARDS - GUIDANCE
PREN 1621-1 : DRAFT 2010	MOTORCYCLISTS' PROTECTIVE CLOTHING AGAINST MECHANICAL IMPACT - PART 1: MOTORCYCLISTS' LIMB JOINT IMPACT PROTECTORS - REQUIREMENTS AND TEST METHODS
DIN EN 71-13:2014-07	Safety of toys - Part 13: Olfactory board games, cosmetic kits and gustative games
UNI EN 71-4 : 2013	SAFETY OF TOYS - PART 4: EXPERIMENTAL SETS FOR CHEMISTRY AND RELATED ACTIVITIES
I.S. EN 1127-1:2011	EXPLOSIVE ATMOSPHERES - EXPLOSION PREVENTION AND PROTECTION - PART 1: BASIC CONCEPTS AND METHODOLOGY
S.R. CEN TR 15419:2006	PROTECTIVE CLOTHING - GUIDELINES FOR SELECTION, USE, CARE AND MAINTENANCE OF CHEMICAL PROTECTIVE CLOTHING
DIN EN ISO 10256-1:2015-08 (Draft)	PROTECTIVE EQUIPMENT FOR USE IN ICE HOCKEY - PART 1: GENERAL REQUIREMENTS (ISO 10256-1:2016)
NF EN 342 : 2017	PROTECTIVE CLOTHING - ENSEMBLES AND GARMENTS FOR PROTECTION AGAINST COLD
PD CEN/TR 16953:2017	Medical gloves for single use. Guidance for selection
PREN 1809 : DRAFT 2012	DIVING EQUIPMENT - BUOYANCY COMPENSATORS - FUNCTIONAL AND SAFETY REQUIREMENTS, TEST METHODS
S.R. CEN/TR 16149:2011	GUIDANCE DOCUMENT FOR DRAFTING CEN/TC 158 STANDARDS
PREN 50321 : DRAFT 2013	LIVE WORKING - FOOTWEAR FOR ELECTRICAL PROTECTION - INSULATING FOOTWEAR AND OVERBOOTS
BS EN ISO 9151:2016	Protective clothing against heat and flame. Determination of heat transmission on exposure to flame
NF EN ISO 12127-2 : 2008	CLOTHING FOR PROTECTION AGAINST HEAT AND FLAME - DETERMINATION OF CONTACT HEAT TRANSMISSION THROUGH PROTECTIVE CLOTHING OR CONSTITUENT MATERIALS - PART 2: TEST METHOD USING CONTACT HEAT PRODUCED BY DROPPING SMALL CYLINDERS
PREN 50575 : DRAFT 2012	POWER, CONTROL AND COMMUNICATION CABLES - CABLES FOR GENERAL APPLICATIONS IN CONSTRUCTION WORKS SUBJECT TO REACTION TO FIRE REQUIREMENTS
PREN 374-2 : DRAFT 2013	PROTECTIVE GLOVES AGAINST CHEMICALS AND MICRO-ORGANISMS - PART 2: DETERMINATION OF RESISTANCE TO PENETRATION
CEN/TR 15419:2017	Protective clothing - Guidelines for selection, use, care and maintenance of chemical protective clothing
EN 1146:2005	Respiratory protective devices - Self-contained open-circuit compressed air breathing apparatus incorporating a hood for escape - Requirements, testing, marking
NF EN 352-1 : 2003	HEARING PROTECTORS - GENERAL REQUIREMENTS - PART 1: EAR-MUFFS
NF EN 14387 : 2004 + A1 2008	RESPIRATORY PROTECTIVE DEVICES - GAS FILTER(S) AND COMBINED FILTER(S) - REQUIREMENTS, TESTING, MARKING
DIN EN 1005-1:2009-04	SAFETY OF MACHINERY - HUMAN PHYSICAL PERFORMANCE - PART 1: TERMS AND DEFINITIONS
BS EN 13034 : 2005	PROTECTIVE CLOTHING AGAINST LIQUID CHEMICALS - PERFORMANCE REQUIREMENTS FOR CHEMICAL PROTECTIVE CLOTHING OFFERING LIMITED PROTECTIVE PERFORMANCE AGAINST LIQUID CHEMICALS (TYPE 6 AND TYPE PB [6] EQUIPMENT)
BS EN 1150:1999	Protective clothing. Visibility clothing for non-professional use. Test methods and requirements
BS EN 14225-4:2005	Diving suits One atmosphere suits (ADS). Human factors requirements and test methods
BS EN 533:1997	PROTECTIVE CLOTHING - PROTECTION AGAINST HEAT AND FLAME - LIMITED FLAME SPREAD MATERIALS AND MATERIAL ASSEMBLIES
BS EN 471 : 2003	HIGH-VISIBILITY WARNING CLOTHING FOR PROFESSIONAL USE - TEST METHODS AND REQUIREMENTS
BS EN 143:2000	Respiratory protective devices. Particle filters. Requirements, testing, marking
BS EN 15567-1:2015	SPORTS AND RECREATIONAL FACILITIES - ROPES COURSES - PART 1: CONSTRUCTION AND SAFETY REQUIREMENTS
BS EN 175:1997	PERSONAL PROTECTION - EQUIPMENT FOR EYES AND FACE PROTECTION DURING WELDING AND ALLIED PROCESSES
BS EN 13274-5:2001	Respiratory protective devices. Methods of test Climatic conditions
BS EN 133:2001	RESPIRATORY PROTECTIVE DEVICES - CLASSIFICATION
BS EN 1385:2012	Helmets for canoeing and white water sports
BS EN 421:2010	Protective gloves against ionizing radiation and radioactive contamination
BS EN 13138-1:2008	Buoyant aids for swimming instruction Safety requirements and test methods for buoyant aids to be worn
ISO 14877:2002	Protective clothing for abrasive blasting operations using granular abrasives
BS EN 13595-2:2002	PROTECTIVE CLOTHING FOR PROFESSIONAL MOTORCYCLE RIDERS - JACKETS, TROUSERS AND ONE-PIECE OR DIVIDED SUITS - PART 2: TEST METHOD FOR DETERMINATION OF IMPACT ABRASION RESISTANCE
BS EN 958:2017	Mountaineering equipment. Energy absorbing systems for use in klettersteig (via ferrata) climbing. Safety requirements and test methods
BS EN 12083:1998	Respiratory protective devices. Filters with breathing hoses, (non-mask mounted filters). Particle filters, gas filters, and combined filters. Requirements, testing, marking
BS EN 15614:2007	Protective clothing for firefighters. Laboratory test methods and performance requirements for wildland clothing
BS EN 340:2003	Protective clothing. General requirements
BS EN 13567 : 2002	PROTECTIVE CLOTHING - HAND, ARM, CHEST, ABDOMEN, LEG, GENITAL AND FACE PROTECTORS FOR FENCERS - REQUIREMENTS AND TEST METHODS
BS EN ISO 12402-9 : 2006	PERSONAL FLOTATION DEVICES - PART 9: TEST METHODS
BS EN 134:1998	Respiratory protective devices. Nomenclature of components
I.S. EN 1005-1:2002	SAFETY OF MACHINERY - HUMAN PHYSICAL PERFORMANCE - PART 1: TERMS AND DEFINITIONS
I.S. EN 13087-6:2012	PROTECTIVE HELMETS - TEST METHODS - PART 6: FIELD OF VISION
EN 14387:2004+A1:2008	Respiratory protective devices - Gas filter(s) and combined filter(s) - Requirements, testing, marking
I.S. EN 137:2006	RESPIRATORY PROTECTIVE DEVICES - SELF-CONTAINED OPEN-CIRCUIT COMPRESSED AIR BREATHING APPARATUS WITH FULL FACE MASK - REQUIREMENTS, TESTING, MARKING
EN 352-7:2002	Hearing protectors - Safety requirements and testing - Part 7: Level-dependent ear-plugs
EN 352-6:2002	Hearing protectors - Safety requirements and testing - Part 6: Ear-muffs with electrical audio input
EN 352-2:2002	Hearing protectors - General requirements - Part 2: Ear-plugs
EN 143:2000/A1:2006	RESPIRATORY PROTECTIVE DEVICES - PARTICLE FILTERS - REQUIREMENTS, TESTING, MARKING
I.S. EN 15567-2:2015	SPORTS AND RECREATIONAL FACILITIES - ROPES COURSES - PART 2: OPERATION REQUIREMENTS
DIN EN 1127-1:2011-10	EXPLOSIVE ATMOSPHERES - EXPLOSION PREVENTION AND PROTECTION - PART 1: BASIC CONCEPTS AND METHODOLOGY
I.S. EN 13087-5:2012	PROTECTIVE HELMETS - TEST METHODS - PART 5: RETENTION SYSTEM STRENGTH
I.S. EN 1127-2:2014	EXPLOSIVE ATMOSPHERES - EXPLOSION PREVENTION AND PROTECTION - PART 2: BASIC CONCEPTS AND METHODOLOGY FOR MINING
EN 352-1:2002	Hearing protectors - General requirements - Part 1: Ear-Muffs
I.S. EN 13087-4:2012	PROTECTIVE HELMETS - TEST METHODS - PART 4: RETENTION SYSTEM EFFECTIVENESS
DIN EN 12094-8:2006-07	Fixed firefighting systems - Components for gas extinguishing systems - Part 8: Requirements and test methods for connectors
I.S. EN 13781:2012	PROTECTIVE HELMETS FOR DRIVERS AND PASSENGERS OF SNOWMOBILES AND BOBSLEIGHS
I.S. EN 1497:2007	PERSONAL FALL PROTECTION EQUIPMENT - RESCUE HARNESSES
I.S. EN 12568:2010	FOOT AND LEG PROTECTORS - REQUIREMENTS AND TEST METHODS FOR TOECAPS AND PENETRATION RESISTANT INSERTS
EN 13819-1:2002	Hearing protectors - Testing - Part 1: Physical test methods
EN 352-3:2002	Hearing protectors - General requirements - Part 3: Ear-muffs attached to an industrial safety helmet
I.S. EN 13087-10:2012	PROTECTIVE HELMETS - TEST METHODS - PART 10: RESISTANCE TO RADIANT HEAT
EN 352-5:2002/A1:2005	HEARING PROTECTORS - SAFETY REQUIREMENTS AND TESTING - PART 5: ACTIVE NOISE REDUCTION EAR-MUFFS
EN 352-8:2008	Hearing protectors - Safety requirements and testing - Part 8: Entertainment audio ear-muffs
I.S. EN 12094-8:2006	FIXED FIREFIGHTING SYSTEMS - COMPONENTS FOR GAS EXTINGUISHING SYSTEMS - PART 8: REQUIREMENTS AND TEST METHODS FOR CONNECTORS
PD 2777:1994	FABRIC FLAMMABILITY AND BURNING ACCIDENTS
BS 5426:1993	SPECIFICATION FOR WORK WEAR AND CAREER WEAR
BS 5655-11:2005	Lifts and service lifts Code of practice for the undertaking of modifications to existing electric lifts
BS 6739:2009	Code of practice for instrumentation in process control systems: installation design and practice
NF EN ISO 6942 : 2002	PROTECTIVE CLOTHING - PROTECTION AGAINST HEAT AND FIRE - METHOD OF TEST: EVALUATION OF MATERIALS AND MATERIAL ASSEMBLIES WHEN EXPOSED TO A SOURCE OF RADIANT HEAT
BS 6183-1:2000	Protective equipment for cricketers General requirements
BS 7985:2009	CODE OF PRACTICE FOR THE USE OF ROPE ACCESS METHODS FOR INDUSTRIAL PURPOSES
NF EN 166 : 2002	PERSONAL EYE-PROTECTION - SPECIFICATIONS
NF EN ISO 20345 : 2012	PERSONAL PROTECTIVE EQUIPMENT - SAFETY FOOTWEAR
BS 7985:2013	Code of practice for the use of rope access methods for industrial purposes. Recommendations and guidance supplementary to BS ISO 22846
BS 5655-12:2005	Lifts and service lifts Code of practice for the undertaking of modifications to existing hydraulic lifts
BS 7184:2001	Selection, use and maintenance of chemical protective clothing. Guidance
BS 5883:1996	SPECIFICATION FOR SURFACE SWIMMING GOGGLES
BS 4275:1997	GUIDE TO IMPLEMENTING AN EFFECTIVE RESPIRATORY PROTECTIVE DEVICE PROGRAMME
BS 6526:1998	Domestic oven gloves. Requirements and test methods
UNE-EN 71-13:2015	Safety of toys - Part 13: Olfactory board games, cosmetic kits and gustative games
DIN EN 15288-2:2009-05	SWIMMING POOLS - PART 2: SAFETY REQUIREMENTS FOR OPERATION
FD CEN ISO/TR 11610 : 2004 FD	PROTECTIVE CLOTHING - VOCABULARY
I.S. EN ISO 10256-1:2016	PROTECTIVE EQUIPMENT FOR USE IN ICE HOCKEY - PART 1: GENERAL REQUIREMENTS (ISO 10256-1:2016)
DIN EN 71-13 E : 2014	SAFETY OF TOYS - PART 13: OLFACTORY BOARD GAMES, COSMETIC KITS AND GUSTATIVE GAMES
BS EN 352-8:2008	Hearing protectors. Safety requirements and testing Entertainment audio ear-muffs
BS EN 16350:2014	Protective gloves. Electrostatic properties
BS EN 50496:2008	DETERMINATION OF WORKERS' EXPOSURE TO ELECTROMAGNETIC FIELDS AND ASSESSMENT OF RISK AT A BROADCAST SITE
NF EN 14058 : 2017	PROTECTIVE CLOTHING - GARMENTS FOR PROTECTION AGAINST COOL ENVIRONMENTS
PD CEN/CLC/TR 16832:2015	Selection, use, care and maintenance of personal protective equipment for preventing electrostatic risks in hazardous areas (explosion risks)
PREN 360 : DRAFT 2016	PERSONAL PROTECTIVE EQUIPMENT AGAINST FALLS FROM A HEIGHT - RETRACTABLE TYPE FALL ARRESTERS
I.S. EN 12942:1999	RESPIRATORY PROTECTIVE DEVICES - POWER ASSISTED FILTERING DEVICES INCORPORATING FULL FACE MASKS, HALF MASKS OR QUARTER MASKS - REQUIREMENTS, TESTING, MARKING
00/562572 DC : DRAFT JUN 2000	BS EN 13921-6 - PERSONAL PROTECTIVE EQUIPMENT - ERGONOMIC PRINCIPLES - PART 6: SENSORY FACTORS
BS EN 14594:2005	RESPIRATORY PROTECTIVE DEVICES - CONTINUOUS FLOW COMPRESSED AIR LINE BREATHING APPARATUS - REQUIREMENTS, TESTING MARKING
BS PD CEN/TR 16832 : 2015	SELECTION, USE, CARE AND MAINTENANCE OF PERSONAL PROTECTIVE EQUIPMENT FOR PREVENTING ELECTROSTATIC RISKS IN HAZARDOUS AREAS (EXPLOSION RISKS)
12/30265285 DC : 0	BS EN 16473 - FIREFIGHTERS HELMETS - HELMETS FOR TECHNICAL RESCUE
14/30293497 DC : 0	BS EN 14225-2 - DIVING SUITS - PART 2: DRY SUITS - REQUIREMENTS AND TEST METHODS
BS EN ISO 12127-2:2007	Clothing for protection against heat and flame. Determination of contact heat transmission through protective clothing or constituent materials Test method using contact heat produced by dropping small cylinders
13/30268672 DC : 0	BS EN 1809 - DIVING EQUIPMENT - BUOYANCY COMPENSATORS - FUNCTIONAL AND SAFETY REQUIREMENTS, TEST METHODS
03/100433 DC : DRAFT JAN 2003	EN 14605 - PROTECTIVE CLOTHING FOR USE AGAINST LIQUID CHEMICALS - PERFORMANCE REQUIREMENTS FOR CHEMICAL PROTECTIVE CLOTHING WITH LIQUID-TIGHT (TYPE 3) OR SPRAY-TIGHT (TYPE 4) CONNECTIONS BETWEEN PARTS OF THE CLOTHING, INCLUDING ITEMS PROVIDING PROTECTION TO PARTS OF THE BODY ONLY
00/562462 DC : DRAFT MAY 2000	PREN ISO 12402-2 - PERSONAL FLOTATION DEVICES - PART 2: CLASS B (OFFSHORE LIFEJACKETS, EXTREME CONDITIONS - 275 N), SAFETY REQUIREMENTS
PREN 13158 : DRAFT 2017	PROTECTIVE CLOTHING - PROTECTIVE JACKETS, BODY AND SHOULDER PROTECTORS FOR EQUESTRIAN USE, FOR HORSE RIDERS AND THOSE WORKING WITH HORSES, AND FOR HORSE DRIVERS - REQUIREMENTS AND TEST METHODS
11/30246171 DC : 0	BS EN 71-4 - SAFETY OF TOYS - PART 4: EXPERIMENTAL SETS FOR CHEMISTRY AND RELATED ACTIVITIES
08/30184738 DC : DRAFT JUNE 2008	BS EN 353-1 - PERSONAL PROTECTIVE EQUIPMENT AGAINST FALLS FROM A HEIGHT - PART 1: GUIDED TYPE FALL ARRESTERS INCLUDING A RIGID ANCHOR LINE
99/566214 DC : DRAFT NOV 1999	PREN ISO 14876-2 - PROTECTIVE CLOTHING - BODY ARMOUR - PART 2: BULLET RESISTANCE - REQUIREMENTS AND TEST METHODS
14/30281804 DC : 0	BS 8608 - SPECIFICATION FOR RADIO TELEMETRY SYSTEMS FOR THE FIRE AND RESCUESERVICE
09/30200155 DC : 0	BS EN ISO 20347 - PERSONAL PROTECTIVE EQUIPMENT - OCCUPATIONAL FOOTWEAR
BS 8468-4:2008	RESPIRATORY PROTECTIVE DEVICES FOR USE AGAINST CHEMICAL, BIOLOGICAL, RADIOLOGICAL AND NUCLEAR (CBRN) AGENTS - PART 4: POWERED AIR PURIFYING RESPIRATORS - SPECIFICATION
07/30169528 DC : 0	BS EN 15333-2 - RESPIRATORY EQUIPMENT - OPEN-CIRCUIT UMBILICAL SUPPLIED COMPRESSED GAS DIVING APPARATUS - PART 2: FREE FLOW APPARATUS
00/565107 DC : DRAFT NOV 2000	BS EN 14052 - SPECIFICATION FOR HIGH PERFORMANCE INDUSTRIAL SAFETY HELMETS
BS EN 15649-1 : 2009	FLOATING LEISURE ARTICLES FOR USE ON AND IN THE WATER - PART 1: CLASSIFICATION, MATERIALS, GENERAL REQUIREMENTS AND TEST METHODS
12/30260505 DC : 0	BS EN 16448-3 - PROTECTIVE CLOTHING - BODY ARMOUR - PART 3: KNIFE AND SPIKE RESISTANCE - REQUIREMENTS AND TEST METHODS
16/30341170 DC : 0	BS EN ISO 11393-1 - PROTECTIVE CLOTHING FOR USERS OF HAND-HELD CHAIN-SAWS - PART 1: TEST RIG FOR TESTING RESISTANCE TO CUTTING BY A CHAIN-SAW
13/30282508 DC : 0	BS EN 1073-1 - PROTECTIVE CLOTHING AGAINST RADIOACTIVE CONTAMINATION - PART 1: REQUIREMENTS AND TEST METHODS FOR VENTILATED PROTECTIVE CLOTHING AGAINST PARTICULATE RADIOACTIVE CONTAMINATION
09/30200131 DC : 0	BS EN ISO 20345 - PERSONAL PROTECTIVE EQUIPMENT - SAFETY FOOTWEAR
11/30239233 DC : DRAFT MAR 2011	BS EN ISO 11611 - PROTECTIVE CLOTHING FOR USE IN WELDING AND ALLIED PROCESSES
13/30284837 DC : 0	BS EN 16689 - PROTECTIVE CLOTHING TO BE WORN BY FIREFIGHTERS DURING TECHNICAL RESCUE OPERATIONS
13/30259878 DC : 0	BS EN ISO 12312-2 - EYE AND FACE PROTECTION - SUNGLASSES AND RELATED EYEWEAR - PART 2: FILTERS FOR DIRECT OBSERVATION OF THE SUN
BS DD253(2001) : 2001	MOUTHGUARDS FOR USE IN SPORT AND RECREATION - REQUIREMENTS AND TEST METHODS
11/30239239 DC : DRAFT MAR 2011	BS EN ISO 11612 - PROTECTIVE CLOTHING - CLOTHING TO PROTECT AGAINST HEAT AND FLAME - MINIMUM PERFORMANCE REQUIREMENTS
11/30247808 DC : 0	BS EN 12270 - MOUNTAINEERING EQUIPMENT - CHOCKS - SAFETY REQUIREMENTS AND TEST METHODS
11/30215084 DC : 0	BS EN ISO 6529 - PROTECTIVE CLOTHING - PROTECTION AGAINST CHEMICALS - DETERMINATION OF RESISTANCE OF PROTECTIVE CLOTHING MATERIALS TO PERMEATION BY LIQUIDS AND GASES
ISO/TR 2801:2007	Clothing for protection against heat and flame General recommendations for selection, care and use of protective clothing
NF EN 13158 : 2018	PROTECTIVE CLOTHING - PROTECTIVE JACKETS, BODY AND SHOULDER PROTECTORS FOR EQUESTRIAN USE, FOR HORSE RIDERS AND THOSE WORKING WITH HORSES, AND FOR HORSE DRIVERS - REQUIREMENTS AND TEST METHODS
BS EN 16473:2014	Firefighters helmets. Helmets for technical rescue
00/563156 DC : DRAFT JULY 2000	PREN ISO 12402-9 - PERSONAL FLOTATION DEVICES - PART 9: TEST METHODS FOR CLASSES A TO F
10/30217692 DC : 0	BS 8468-6.2 - RESPIRATORY PROTECTIVE DEVICES FOR USE AGAINST CHEMICAL, BIOLOGICAL, RADIOLOGICAL AND NUCLEAR (CBRN) AGENTS - PART 6.2: CONSTANT FLOW COMPRESSED AIRLINE EQUIPMENT - SPECIFICATION
00/562569 DC : DRAFT JUN 2000	BS EN 13921-1 - PERSONAL PROTECTIVE EQUIPMENT - ERGONOMIC PRINCIPLES - PART 1: GENERAL REQUIREMENTS FOR THE DESIGN AND THE SPECIFICATION
16/30336443 DC : 0	BS EN 207 - PERSONAL EYE-PROTECTION EQUIPMENT - FILTERS AND EYE-PROTECTORS AGAINST LASER RADIATION (LASER EYE-PROTECTORS)
PREN 13634 : DRAFT 2017	PROTECTIVE FOOTWEAR FOR MOTORCYCLE RIDERS - REQUIREMENTS AND TEST METHODS
PREN 469 : DRAFT 2015	PROTECTIVE CLOTHING FOR FIREFIGHTERS - PERFORMANCE REQUIREMENTS FOR PROTECTIVE CLOTHING FOR FIREFIGHTING
PREN 13832-1 : DRAFT 2017	FOOTWEAR PROTECTING AGAINST CHEMICALS - PART 1: TERMINOLOGY AND TEST METHODS
13/30280708 DC : 0	BS EN 374-2 - PROTECTIVE GLOVES AGAINST CHEMICALS AND MICRO-ORGANISMS - PART 2: DETERMINATION OF RESISTANCE TO PENETRATION
04/30095733 DC : DRAFT APR 2004	EN 13832-4 - FOOTWEAR PROTECTING AGAINST CHEMICALS AND MICRO-ORGANISMS - PART 4: FOOTWEAR PROTECTIVE AGAINST MICRO-ORGANISMS
UNE-EN 15649-1:2010	Floating leisure articles for use on and in the water - Part 1: Classification, materials, general requirements and test methods
UNE-EN ISO 10256-1:2017	Protective equipment for use in ice hockey - Part 1: General requirements (ISO 10256-1:2016)
EN 12277:2015	Mountaineering equipment - Harnesses - Safety requirements and test methods
PREN 407 : DRAFT 2017	PROTECTIVE GLOVES AGAINST THERMAL RISKS (HEAT AND/OR FIRE)
PREN 795 : DRAFT 2009	PERSONAL FALL PROTECTION EQUIPMENT - ANCHOR DEVICES
CEN/CLC/TR 16832:2015	Selection, use, care and maintenance of personal protective equipment for preventing electrostatic risks in hazardous areas (explosion risks)
CEN/TR 16953:2017	Medical gloves for single use - Guidance for selection
ISO 10819:2013	Mechanical vibration and shock — Hand-arm vibration — Measurement and evaluation of the vibration transmissibility of gloves at the palm of the hand
PD CEN/TR 14560:2003	GUIDELINES FOR SELECTION, USE, CARE AND MAINTENANCE OF PROTECTIVE CLOTHING AGAINST HEAT AND FLAME
PREN 15567-1 : DRAFT 2013	SPORTS AND RECREATIONAL FACILITIES - ROPES COURSES - PART 1: CONSTRUCTION AND SAFETY REQUIREMENTS
EN 388 : 1994	PROTECTIVE GLOVES AGAINST MECHANICAL RISKS
BS EN 388 : 2016	PROTECTIVE GLOVES AGAINST MECHANICAL RISKS
ISO 374-1:2016	Protective gloves against dangerous chemicals and micro-organisms Part 1: Terminology and performance requirements for chemical risks
EN 14325:2004	Protective clothing against chemicals - Test methods and performance classification of chemical protective clothing materials, seams, joins and assemblages
NF EN 13595-2 : 2003	PROTECTIVE CLOTHING FOR PROFESSIONAL MOTORCYCLE RIDERS - JACKETS, TROUSERS AND ONE-PIECE OR DIVIDED SUITS - PART 2: TEST METHOD FOR DETERMINATION OF IMPACT ABRASION RESISTANCE
NF EN 893 : 2011	MOUNTAINEERING EQUIPMENT - CRAMPONS - SAFETY REQUIREMENTS AND TEST METHODS
NF EN 352-4 : 2001 AMD 1 2006	HEARING PROTECTORS - SAFETY REQUIREMENTS AND TESTING - PART 4: LEVEL-DEPENDENT EAR-MUFFS
DIN EN 1127-2:2014-09	EXPLOSIVE ATMOSPHERES - EXPLOSION PREVENTION AND PROTECTION - PART 2: BASIC CONCEPTS AND METHODOLOGY FOR MINING
DIN EN 12568:2010-10	FOOT AND LEG PROTECTORS - REQUIREMENTS AND TEST METHODS FOR TOECAPS AND PENETRATION RESISTANT INSERTS
NF EN 352-2 : 2003	HEARING PROTECTORS - GENERAL REQUIREMENTS - PART 2: EAR-PLUGS
DIN EN 12477:2005-09	Protective gloves for welders; German version EN 12477:2001 + A1:2005
NF EN 13819-1 : 2003	HEARING PROTECTORS - TESTING - PART 1: PHYSICAL TEST METHODS
ISO 11612:2015	Protective clothing — Clothing to protect against heat and flame — Minimum performance requirements
BS EN ISO 6529:2001	Protective clothing. Protection against chemicals. Determination of resistance of protective clothing materials to permeation by liquids and gases
BS EN 1078 : 2012	HELMETS FOR PEDAL CYCLISTS AND FOR USERS OF SKATEBOARDS AND ROLLER SKATES
BS EN 168:2002	PERSONAL EYE-PROTECTION - NON-OPTICAL TEST METHODS
BS EN 397 : 2012	INDUSTRIAL SAFETY HELMETS
BS EN 13087-5:2012	Protective helmets. Test methods Retention system strength
BS EN 170:2002	Personal eye-protection. Ultraviolet filters.Transmittance requirements and recommended use
ISO 12311:2013	Personal protective equipment — Test methods for sunglasses and related eyewear
BS EN 795:2012	Personal fall protection equipment. Anchor devices
BS EN ISO 12402-3 : 2006	PERSONAL FLOTATION DEVICES - PART 3: LIFEJACKETS, PERFORMANCE LEVEL 150 - SAFETY REQUIREMENTS
BS EN 1621-1:2012	Motorcyclists\' protective clothing against mechanical impact Motorcyclists\' limb joint impact protectors. Requirements and test methods
BS EN 1082-1:1997	Protective clothing. Gloves and arm guards protecting against cuts and stabs by hand knives Chain mail gloves and arm guards
BS EN 13277-2:2000	Protective equipment for martial arts Additional requirements and test methods for instep protectors, shin protectors and forearm protectors
ISO 12127-1:2015	Clothing for protection against heat and flame Determination of contact heat transmission through protective clothing or constituent materials Part 1: Contact heat produced by heating cylinder
BS EN 381-7:1999	Protective clothing for users of hand-held chain saws Requirements for chainsaw protective gloves
BS EN 13274-4:2001	RESPIRATORY PROTECTIVE DEVICES - METHODS OF TEST - PART 4: FLAME TESTS
ISO 12402-2:2006	Personal flotation devices Part 2: Lifejackets, performance level 275 Safety requirements
EN ISO 12402-8:2006/A1:2011	PERSONAL FLOTATION DEVICES - PART 8: ACCESSORIES - SAFETY REQUIREMENTS AND TEST METHODS
EN 420:2003+A1:2009	Protective gloves - General requirements and test methods
EN ISO 12402-6:2006/A1:2010	PERSONAL FLOTATION DEVICES - PART 6: SPECIAL PURPOSE LIFEJACKETS AND BUOYANCY AIDS - SAFETY REQUIREMENTS AND ADDITIONAL TEST METHODS
EN ISO 12402-10:2006	Personal flotation devices - Part 10: Selection and application of personal flotation devices and other relevant devices (ISO 12402-10:2006)
EN ISO 12402-3:2006/A1:2010	PERSONAL FLOTATION DEVICES - PART 3: LIFEJACKETS, PERFORMANCE LEVEL 150 - SAFETY REQUIREMENTS
EN ISO 12402-5:2006/A1:2010	PERSONAL FLOTATION DEVICES - PART 5: BUOYANCY AIDS (LEVEL 50) - SAFETY REQUIREMENTS
EN ISO 12402-2:2006/A1:2010	PERSONAL FLOTATION DEVICES - PART 2: LIFEJACKETS, PERFORMANCE LEVEL 275 - SAFETY REQUIREMENTS
EN ISO 12402-4:2006/A1:2010	PERSONAL FLOTATION DEVICES - PART 4: LIFEJACKETS, PERFORMANCE LEVEL 100 - SAFETY REQUIREMENTS
EN 13274-4:2001	Respiratory protective devices - Methods of test - Part 4: Flame tests
EN ISO 12402-7:2006/A1:2011	PERSONAL FLOTATION DEVICES - PART 7: MATERIALS AND COMPONENTS - SAFETY REQUIREMENTS AND TEST METHODS
EN 355:2002	Personal protective equipment against falls from a height - Energy absorbers
EN 381-11:2002	Protective clothing for users of hand-held chainsaws - Part 11: Requirements for upper body protectors
EN 362:2004	Personal protective equipment against falls from a height - Connectors
EN 813:2008	Personal fall protection equipment - Sit harnesses
EN ISO 17249:2013/AC:2014	SAFETY FOOTWEAR WITH RESISTANCE TO CHAIN SAW CUTTING (ISO 17249:2013)
EN 142:2002	Respiratory protective devices - Mouthpiece assemblies - Requirements, testing, marking
EN 13795-1:2002+A1:2009	Surgical drapes, gowns and clean air suits, used as medical devices, for patients, clinical staff and equipment - Part 1: General requirements for manufacturers, processors and products
EN 144-3:2003/AC:2003	RESPIRATORY PROTECTIVE DEVICES - GAS CYLINDER VALVES - PART 3: OUTLET CONNECTIONS FOR DIVING GASES NITROX AND OXYGEN
EN 137:2006	Respiratory protective devices - Self-contained open-circuit compressed air breathing apparatus with full face mask - Requirements, testing, marking
UNI EN 1127-2 : 2014	EXPLOSIVE ATMOSPHERES - EXPLOSION PREVENTION AND PROTECTION - PART 2: BASIC CONCEPTS AND METHODOLOGY FOR MINING
UNI EN 12568 : 2010	FOOT AND LEG PROTECTORS - REQUIREMENTS AND TEST METHODS FOR TOECAPS AND PENETRATION RESISTANT INSERTS
EN ISO 374-5:2016	Protective gloves against dangerous chemicals and micro-organisms - Part 5: Terminology and performance requirements for micro-organisms risks (ISO 374-5:2016)
UNI EN 1005-1 : 2009	SAFETY OF MACHINERY - HUMAN PHYSICAL PERFORMANCE - PART 1: TERMS AND DEFINITIONS
DIN EN ISO 10256-1 E : 2017	PROTECTIVE EQUIPMENT FOR USE IN ICE HOCKEY - PART 1: GENERAL REQUIREMENTS (ISO 10256-1:2016)
S.R. CEN/TR 16953:2017	MEDICAL GLOVES FOR SINGLE USE - GUIDANCE FOR SELECTION
16/30280808 DC : 0	BS 7971-5 - PROTECTIVE CLOTHING AND EQUIPMENT FOR USE IN VIOLENT SITUATIONS AND IN TRAINING - PART 5: FOOTWEAR - REQUIREMENTS AND TEST METHODS
BS EN ISO 10862:2009	Small craft. Quick release system for trapeze harness
16/30338534 DC : 0	BS EN 144-2 - RESPIRATORY PROTECTIVE DEVICES - GAS CYLINDER VALVES - PART 2: OUTLET CONNECTIONS
PREN 144-2 : DRAFT 2016	RESPIRATORY PROTECTIVE DEVICES - GAS CYLINDER VALVES - PART 2: OUTLET CONNECTIONS
PREN 144-1 : DRAFT 2016	RESPIRATORY PROTECTIVE DEVICES - GAS CYLINDER VALVES - PART 1: INLET CONNECTIONS
BS 8468-5:2011	Respiratory protective devices for use against chemical, biological, radiological and nuclear (CBRN) agents Dual-mode apparatus. Specification
BS 8468-3.1:2009	RESPIRATORY PROTECTIVE DEVICES FOR USE AGAINST CHEMICAL, BIOLOGICAL, RADIOLOGICAL AND NUCLEAR (CBRN) AGENTS - PART 3.1: SELF-CONTAINED OPEN-CIRCUIT COMPRESSED AIR BREATHING APPARATUS INCORPORATING A HOOD FOR ESCAPE - SPECIFICATION
PREN 12878 : DRAFT 2012	PIGMENTS FOR THE COLOURING OF BUILDING MATERIALS BASED ON CEMENT AND/OR LIME - SPECIFICATIONS AND METHODS OF TEST
I.S. EN ISO 25649-1:2017	FLOATING LEISURE ARTICLES FOR USE ON AND IN THE WATER - PART 1: CLASSIFICATION, MATERIALS, GENERAL REQUIREMENTS AND TEST METHODS (ISO 25649-1:2017)
14/30281166 DC : 0	BS EN 50321 - LIVE WORKING - FOOTWEAR FOR ELECTRICAL PROTECTION - INSULATING FOOTWEAR AND OVERBOOTS
BS EN 15333-2:2009	RESPIRATORY EQUIPMENT - OPEN-CIRCUIT UMBILICAL SUPPLIED COMPRESSED GAS DIVING APPARATUS - PART 2: FREE FLOW APPARATUS
I.S. EN 13794:2002	RESPIRATORY PROTECTIVE DEVICES - SELF-CONTAINED CLOSED-CIRCUIT BREATHING APPARATUS FOR ESCAPE - REQUIREMENTS, TESTING, MARKING
10/30196548 DC : 0	BS EN ISO 15027-1 - IMMERSION SUITS - PART 1: CONSTANT WEAR SUITS, REQUIREMENTS INCLUDING SAFETY
10/30196555 DC : 0	BS EN ISO 15027-3 - IMMERSION SUITS - PART 3: TEST METHODS
BS 8468-1:2006	RESPIRATORY PROTECTIVE DEVICES FOR USE AGAINST CHEMICAL, BIOLOGICAL, RADIOLOGICAL AND NUCLEAR (CBRN) AGENTS - PART 1: POSITIVE PRESSURE, SELF-CONTAINED, OPEN-CIRCUIT BREATHING APPARATUS - SPECIFICATION
I.S. EN ISO 10256:2003	HEAD AND FACE PROTECTION FOR USE IN ICE HOCKEY
16/30341711 DC : 0	BS EN 943-2 - PROTECTIVE CLOTHING AGAINST DANGEROUS SOLID, LIQUID AND GASEOUS CHEMICALS, INCLUDING LIQUID AND SOLID AEROSOLS - PART 2: PERFORMANCE REQUIREMENTS FOR TYPE 1 (GAS-TIGHT) CHEMICAL PROTECTIVE SUITS FOR EMERGENCY TEAMS (ET)
BS 8469:2007	Personal protective equipment for firefighters. Assessment of ergonomic performance and compatibility. Requirements and test methods
NF EN 144-1 : 2000 AMD 2 2005	RESPIRATORY PROTECTIVE DEVICES - GAS CYLINDER VALVES - PART 1: THREAD CONNECTIONS FOR INSERT CONNECTOR
14/30288533 DC : 0	BS EN 13634:2010 - PROTECTIVE FOOTWEAR FOR MOTORCYCLE RIDERS - REQUIREMENTS AND TEST METHODS
14/30288142 DC : 0	BS EN 16716 - MOUNTAINEERING EQUIPMENT - AVALANCHE AIRBAG SYSTEMS - SAFETY REQUIREMENTS AND TEST METHODS
11/30247805 DC : 0	BS EN 567 - MOUNTAINEERING EQUIPMENT - ROPE CLAMPS - SAFETY REQUIREMENTS AND TEST METHODS
04/30112373 DC : DRAFT SEP 2004	PREN 1149-1 - PROTECTIVE CLOTHING - ELECTROSTATIC PROPERTIES - PART 1: TEST METHOD FOR MEASUREMENT OF SURFACE RESTIVITY
14/30299477 DC : 0	BS EN 568 - MOUNTAINEERING EQUIPMENT - ICE ANCHORS - SAFETY REQUIREMENTS AND TEST METHODS
00/564562 DC : DRAFT SEP 2000	BS EN 469 - PROTECTIVE CLOTHING FOR FIREFIGHTERS - LABORATORY TEST METHODS AND PERFORMANCE REQUIREMENTS FOR PROTECTIVE CLOTHING FOR FIREFIGHTING
13/30290127 DC : 0	BS EN 13911 - PROTECTIVE CLOTHING FOR FIREFIGHTERS - REQUIREMENTS AND TEST METHODS FOR FIRE HOODS FOR FIREFIGHTERS
03/117128 DC : 0	EN 1486 - PROTECTIVE CLOTHING FOR FIREFIGHTERS - TEST METHODS AND REQUIREMENTS FOR REFLECTIVE CLOTHING FOR SPECIALISED FIRE-FIGHTING
16/30341182 DC : 0	BS EN ISO 11393-4 - PROTECTIVE CLOTHING FOR USERS OF HAND-HELD CHAIN-SAWS - PART 4: TEST METHODS AND PERFORMANCE REQUIREMENTS FOR PROTECTIVE GLOVES
11/30242690 DC : 0	BS EN 892 - MOUNTAINEERING EQUIPMENT - DYNAMIC MOUNTAINEERING ROPES - SAFETY REQUIREMENTS AND TEST METHODS
11/30241728 DC : DRAFT MAR 2011	BS EN ISO 13287 - PERSONAL PROTECTIVE EQUIPMENT - FOOTWEAR - TEST METHOD FOR SLIP RESISTANCE
BS 7971-10:2014	PROTECTIVE CLOTHING AND EQUIPMENT FOR USE IN VIOLENT SITUATIONS AND IN TRAINING - PART 10: COVERALLS - REQUIREMENTS AND TEST METHODS
CEN/TR 16832 : 2015 COR 2015	SELECTION, USE, CARE AND MAINTENANCE OF PERSONAL PROTECTIVE EQUIPMENT FOR PREVENTING ELECTROSTATIC RISKS IN HAZARDOUS AREAS (EXPLOSION RISKS)
DIN EN 15649-1:2014-06	FLOATING LEISURE ARTICLES FOR USE ON AND IN THE WATER - PART 1: CLASSIFICATION, MATERIALS, GENERAL REQUIREMENTS AND TEST METHODS
PREN 16523-2 : DRAFT 2013	DETERMINATION OF MATERIAL RESISTANCE TO PERMEATION BY CHEMICALS - PART 2: PERMEATION BY GASEOUS CHEMICAL UNDER CONDITIONS OF CONTINUOUS CONTACT
PREN 14325 : DRAFT 2016	PROTECTIVE CLOTHING AGAINST CHEMICALS - TEST METHODS AND PERFORMANCE CLASSIFICATION OF CHEMICAL PROTECTIVE CLOTHING MATERIALS, SEAMS, JOINS AND ASSEMBLAGES
BS EN 15151-1:2012	Mountaineering equipment. Braking devices Braking devices with manually assisted locking, safety requirements and test methods
16/30341186 DC : 0	BS EN ISO 11393-5 - PROTECTIVE CLOTHING FOR USERS OF HAND-HELD CHAIN-SAWS - PART 5: TEST METHODS AND PERFORMANCE REQUIREMENTS FOR PROTECTIVE GAITERS
17/30351919 DC : 0	BS EN 13634 - PROTECTIVE FOOTWEAR FOR MOTORCYCLE RIDERS - REQUIREMENTS AND TEST METHODS
16/30296872 DC : 0	BS ISO 10256-5 - PROTECTIVE EQUIPMENT FOR USE IN ICE HOCKEY - PART 5: NECK LACERATION PROTECTORS FOR ICE HOCKEY PLAYERS
04/30095727 DC : DRAFT APR 2004	EN 13832-2 - FOOTWEAR PROTECTING AGAINST CHEMICALS AND MICRO-ORGANISMS - PART 2: PROTECTION AGAINST CHEMICALS SPRAYING
17/30353379 DC : 0	BS EN 13158 - PROTECTIVE CLOTHING - PROTECTIVE JACKETS, BODY AND SHOULDER PROTECTORS FOR EQUESTRIAN USE, FOR HORSE RIDERS AND THOSE WORKING WITH HORSES, AND FOR HORSE DRIVERS - REQUIREMENTS AND TEST METHODS
11/30246792 DC : 0	BS 8468-7 - RESPIRATORY PROTECTIVE DEVICES FOR USE AGAINST CHEMICAL, BIOLOGICAL, RADIOLOGICAL AND NUCLEAR (CBRN) AGENTS - PART 7: CLOSED-CIRCUIT BREATHING APPARATUS - SPECIFICATION
16/30341174 DC : 0	BS EN ISO 11393-2 - PROTECTIVE CLOTHING FOR USERS OF HAND-HELD CHAIN-SAWS - PART 2: PERFORMANCE REQUIREMENTS AND TEST METHODS FOR LEG PROTECTORS
12/30259025 DC : 0	BS EN 50575 - POWER, CONTROL AND COMMUNICATION CABLES - CABLES FOR GENERAL APPLICATIONS IN CONSTRUCTION WORKS SUBJECT TO REACTION TO FIRE REQUIREMENTS
12/30260499 DC : 0	BS EN 16448-1 - PROTECTIVE CLOTHING - BODY ARMOUR - PART 1: GENERAL REQUIREMENTS
PD CEN/TR 16149:2011	Guidance Document for drafting CEN/TC 158 Standards
07/30149276 DC : 0	BS 8468-4 - RESPIRATORY PROTECTIVE DEVICES FOR USE AGAINST CHEMICAL, BIOLOGICAL, RADIOLOGICAL AND NUCLEAR (CBRN) AGENTS - PART 4: POWERED AIR-PURIFYING RESPIRATORS - SPECIFICATION
PD CEN/TR 15419:2017	Protective clothing. Guidelines for selection, use, care and maintenance of chemical protective clothing
09/30203310 DC : 0	BS EN 15090 - FOOTWEAR FOR FIREFIGHTERS
NF EN 1149-5 : 2008	PROTECTIVE CLOTHING - ELECTROSTATIC PROPERTIES - PART 5: MATERIAL PERFORMANCE AND DESIGN REQUIREMENTS
DIN EN ISO 10862:2009-10	SMALL CRAFT - QUICK RELEASE SYSTEM FOR TRAPEZE HARNESS
15/30296820 DC : 0	BS EN ISO 10256-3 - PROTECTIVE EQUIPMENT FOR USE IN ICE HOCKEY - PART 3: FACE PROTECTORS
UNI EN 1127-1 : 2011	EXPLOSIVE ATMOSPHERES - EXPLOSION PREVENTION AND PROTECTION - PART 1: BASIC CONCEPTS AND METHODOLOGY
UNI EN 71-13 : 2014	SAFETY OF TOYS - PART 13: OLFACTORY BOARD GAMES, COSMETIC KITS AND GUSTATIVE GAMES
UNI EN 15649-1 : 2014	FLOATING LEISURE ARTICLES FOR USE ON AND IN THE WATER - PART 1: CLASSIFICATION, MATERIALS, GENERAL REQUIREMENTS AND TEST METHODS
BS EN ISO 13287:2012	Personal protective equipment. Footwear. Test method for slip resistance
PREN ISO 15027-1 : DRAFT 2010	IMMERSION SUITS - PART 1: CONSTANT WEAR SUITS, REQUIREMENTS INCLUDING SAFETY
S.R. CEN/TR 16386:2013	DENTISTRY - GUIDELINES FOR HANDLING METHACRYLATE-BASED MATERIALS IN THE DENTAL LABORATORY
BS PD IEC TS 60079-32-1 : 2013	EXPLOSIVE ATMOSPHERES - PART 32-1: ELECTROSTATIC HAZARDS, GUIDANCE
I.S. EN 15288-2:2008	SWIMMING POOLS - PART 2: SAFETY REQUIREMENTS FOR OPERATION
ANSI S3.40 : 2002
PREN 12276 : DRAFT 2010	MOUNTAINEERING EQUIPMENT - FRICTIONAL ANCHORS - SAFETY REQUIREMENTS AND TEST METHODS
I.S. EN 50496:2018	DETERMINATION OF WORKERS' EXPOSURE TO ELECTROMAGNETIC FIELDS AND ASSESSMENT OF RISK AT A BROADCAST SITE
PREN 353-1 : DRAFT 2012	PERSONAL FALL PROTECTION EQUIPMENT - GUIDED TYPE FALL ARRESTERS INCLUDING AN ANCHOR LINE - PART 1: GUIDED TYPE FALL ARRESTERS INCLUDING A RIGID ANCHOR LINE
NF EN 358 : 2000	PERSONAL PROTECTIVE EQUIPMENT FOR WORK POSITIONING AND PREVENTION OF FALLS FROM A HEIGHT - BELTS FOR WORK POSITIONING AND RESTRAINT AND WORK POSITIONING LANYARDS
I.S. EN 71-13:2014	SAFETY OF TOYS - PART 13: OLFACTORY BOARD GAMES, COSMETIC KITS AND GUSTATIVE GAMES
17/30353382 DC : 0	BS EN 17092-1 - PROTECTIVE GARMENTS FOR MOTORCYCLE RIDERS - PART 1: TEST METHODS
17/30359551 DC : 0	BS EN 13832-1 - FOOTWEAR PROTECTING AGAINST CHEMICALS - PART 1: TERMINOLOGY AND TEST METHODS
BS EN 353-1 : 2014	PERSONAL FALL PROTECTION EQUIPMENT - GUIDED TYPE FALL ARRESTERS INCLUDING AN ANCHOR LINE - PART 1: GUIDED TYPE FALL ARRESTERS INCLUDING A RIGID ANCHOR LINE
BS EN ISO 10819:2013	MECHANICAL VIBRATION AND SHOCK - HAND-ARM VIBRATION - MEASUREMENT AND EVALUATION OF THE VIBRATION TRANSMISSIBILITY OF GLOVES AT THE PALM OF THE HAND
EN 1073-1:2016/AC:2016	PROTECTIVE CLOTHING AGAINST SOLID AIRBORNE PARTICLES INCLUDING RADIOACTIVE CONTAMINATION - PART 1: REQUIREMENTS AND TEST METHODS FOR COMPRESSED AIR LINE VENTILATED PROTECTIVE CLOTHING, PROTECTING THE BODY AND THE RESPIRATORY TRACT
EN 15288-2:2008	Swimming pools - Part 2: Safety requirements for operation
UNI EN 15288-2 : 2009	SWIMMING POOLS - PART 2: SAFETY REQUIREMENTS FOR OPERATION
NF EN 352-3 : 2003	HEARING PROTECTORS - GENERAL REQUIREMENTS - PART 3: EARMUFFS ATTACHED TO AN INDUSTRIAL SAFETY HELMET
DIN EN 12094-8:2016-06 (Draft)	FIXED FIREFIGHTING SYSTEMS - COMPONENTS FOR GAS EXTINGUISHING SYSTEMS - PART 8: REQUIREMENTS AND TEST METHODS FOR CONNECTORS
DIN EN 15567-2:2015-08	SPORTS- AND RECREATIONAL FACILITIES - ROPES COURSES - PART 2: OPERATION REQUIREMENTS
BS EN 13921:2007	Personal protective equipment. Ergonomic principles
BS EN 381-10:2002	Protective clothing for users of hand-held chain saws Test method for upper body protectors
BS EN 13594:2015	Protective gloves for motorcycle riders. Requirements and test methods
BS EN 13087-2:2012	Protective helmets. Test methods Shock absorption
BS EN 14529:2005	Respiratory protective devices. Self-contained open-circuit compressed air breathing apparatus with half mask designed to include a positive pressure lung governed demand valve for escape purposes only
BS EN 13794:2002	Respiratory protective devices. Self-contained closed-circuit breathing apparatus for escape. Requirements, testing, marking
BS EN 12276:2013	Mountaineering equipment. Frictional anchors. Safety requirements and test methods
BS EN 1146:2005	RESPIRATORY PROTECTIVE DEVICES - SELF CONTAINED OPEN-CIRCUIT COMPRESSED AIR BREATHING APPARATUS INCORPORATING A HOOD FOR ESCAPE - REQUIREMENTS, TESTING, MARKING
ISO 13982-1:2004	Protective clothing for use against solid particulates — Part 1: Performance requirements for chemical protective clothing providing protection to the full body against airborne solid particulates (type 5 clothing)
BS EN 14120 : 2003	PROTECTIVE CLOTHING - WRIST, PALM, KNEE AND ELBOW PROTECTORS FOR USERS OF ROLLER SPORTS EQUIPMENT - REQUIREMENTS AND TEST METHODS
BS EN 402:2003	Respiratory protective devices. Lung governed demand self-contained open-circuit compressed air breathing apparatus with full face mask or mouthpiece assembly for escape. Requirements, testing, marking
BS EN 13087-3:2000	PROTECTIVE HELMETS - TEST METHODS - PART 3 - RESISTANCE TO PENETRATION
BS EN ISO 13997:1999	Protective clothing. Mechanical properties. Determination of resistance to cutting by sharp objects
BS EN 12568:1998	FOOT AND LEG PROTECTORS - REQUIREMENTS AND TEST METHODS FOR TOECAPS AND PENETRATION RESISTANT INSERTS
BS EN 381-9:1997	Protective clothing for users of hand-held chain saws Requirements for chain saw protective gaiters
BS EN 13274-2:2001	RESPIRATORY PROTECTIVE DEVICES - METHODS OF TEST - PART 2: PRACTICAL PERFORMANCE TESTS
BS EN 1005-1 : 2001	SAFETY OF MACHINERY - HUMAN PHYSICAL PERFORMANCE - PART 1: TERMS AND DEFINITIONS
BS EN 1809 : 2014	DIVING EQUIPMENT - BUOYANCY COMPENSATORS - FUNCTIONAL AND SAFETY REQUIREMENTS, TEST METHODS
BS EN 169:2002	Personal eye-protection. Filters for welding and related techniques. Transmittance requirements and recommended use
BS EN 140:1999	Respiratory protective devices. Half masks and quarter masks. Requirements, testing, marking
ISO 17249:2013	Safety footwear with resistance to chain saw cutting
BS EN 171:2002	Personal eye-protection. Infrared filters. Transmittance requirements and recommended use
BS EN 12477:2001	Protective gloves for welders
BS EN 529:2005	Respiratory protective devices. Recommendations for selection, use, care and maintenance. Guidance document
BS EN 12275:2013	Mountaineering equipment. Connectors. Safety requirements and test methods
BS EN 381-8:1997	Protective clothing for users of hand-held chain saws Test methods for chain saw protective gaiters
BS EN 13277-4 : 2001	PROTECTIVE EQUIPMENT FOR MARTIAL ARTS - PART 4: ADDITIONAL REQUIREMENTS AND TEST METHODS FOR HEAD PROTECTORS
BS EN 14325:2004	Protective clothing against chemicals. Test methods and performance classification of chemical protective clothing materials, seams, joins and assemblages
BS EN 13287:2004	PERSONAL PROTECTIVE EQUIPMENT - FOOTWEAR - TEST METHOD FOR SLIP RESISTANCE
BS EN ISO 12402-6 : 2006	PERSONAL FLOTATION DEVICES - PART 6: SPECIAL PURPOSE LIFEJACKETS AND BUOYANCY AIDS - SAFETY REQUIREMENTS AND ADDITIONAL TEST METHODS
BS EN 13061:2009	PROTECTIVE CLOTHING - SHIN GUARDS FOR ASSOCIATION FOOTBALL PLAYERS - REQUIREMENTS AND TEST METHODS
BS EN ISO 12402-5 : 2006	PERSONAL FLOTATION DEVICES - PART 5: BUOYANCY AIDS (LEVEL 50) - SAFETY REQUIREMENTS
BS EN 13277-1:2000	Protective equipment for martial arts General requirements and test methods
BS EN 1938:2010	PERSONAL EYE PROTECTION - GOGGLES FOR MOTORCYCLE AND MOPED USERS
BS EN ISO 12402-4 : 2006	PERSONAL FLOTATION DEVICES - PART 4: LIFEJACKETS, PERFORMANCE LEVEL 100 - SAFETY REQUIREMENTS
BS EN 352-1:2002	Hearing protectors. Safety requirements and testing Ear-muffs
BS EN 469:2014	Protective clothing for firefighters. Performance requirements for protective clothing for firefighting
BS EN 12841:2006	Personal fall protection equipment. Rope access systems. Rope adjustment devices
BS EN 355:2002	Personal protective equipment against falls from a height. Energy absorbers
BS EN 564:2014	Mountaineering equipment. Accessory cord. Safety requirements and test methods
BS EN 132:1999	RESPIRATORY PROTECTIVE DEVICES - DEFINITIONS OF TERMS AND PICTOGRAMS
BS EN 13087-6:2012	Protective helmets. Test methods Field of vision
ISO 12312-2:2015	Eye and face protection Sunglasses and related eyewear Part 2: Filters for direct observation of the sun
BS EN ISO 13982-1 : 2004	PROTECTIVE CLOTHING FOR USE AGAINST SOLID PARTICULATES - PART 1: PERFORMANCE REQUIREMENTS FOR CHEMICAL PROTECTIVE CLOTHING PROVIDING PROTECTION TO THE FULL BODY AGAINST AIRBORNE SOLID PARTICULATES (TYPE 5 CLOTHING)
BS EN 12021:2014	Respiratory equipment. Compressed gases for breathing apparatus
BS EN 135:1999	RESPIRATORY PROTECTIVE DEVICES - LIST OF EQUIVALENT TERMS
BS EN 13274-6:2002	RESPIRATORY PROTECTIVE DEVICES - METHODS OF TEST - PART 6: DETERMINATION OF CARBON DIOXIDE CONTENT OF THE INHALATION AIR
BS EN 403:2004	Respiratory protective devices for self-rescue. Filtering devices with hood for escape from fire. Requirements, testing, marking
ISO 10862:2009	Small craft Quick release system for trapeze harness
ISO 6530:2005	Protective clothing — Protection against liquid chemicals — Test method for resistance of materials to penetration by liquids
BS EN 13274-3:2001	Respiratory protective devices. Methods of test Determination of breathing resistance
ISO 10256:2003	Head and face protection for use in ice hockey
ISO 12402-3:2006	Personal flotation devices Part 3: Lifejackets, performance level 150 Safety requirements
ISO 12402-8:2006	Personal flotation devices Part 8: Accessories Safety requirements and test methods
ISO 20346:2014	Personal protective equipment Protective footwear
BS EN 1127-2:2014	Explosive atmospheres. Explosion prevention and protection Basic concepts and methodology for mining
ISO 15027-2:2012	Immersion suits Part 2: Abandonment suits, requirements including safety
ISO 17491-4:2008	Protective clothing Test methods for clothing providing protection against chemicals Part 4: Determination of resistance to penetration by a spray of liquid (spray test)
ISO 13287:2012	Personal protective equipment Footwear Test method for slip resistance
ISO 12402-4:2006	Personal flotation devices Part 4: Lifejackets, performance level 100 Safety requirements
BS EN 1149-2:1997	Protective clothing. Electrostatic properties Test method for measurement of the electrical resistance through a material (vertical resistance)
ISO 12127-2:2007	Clothing for protection against heat and flame — Determination of contact heat transmission through protective clothing or constituent materials — Part 2: Test method using contact heat produced by dropping small cylinders
BS EN 362:2004	Personal protective equipment against falls from a height. Connectors
BS EN ISO 17249:2013	Safety footwear with resistance to chain saw cutting
BS EN 136:1998	Respiratory protective devices. Full face masks. Requirements, testing, marking
ISO 22612:2005	Clothing for protection against infectious agents Test method for resistance to dry microbial penetration
BS EN ISO 12402-10:2006	Personal flotation devices Selection and application of personal flotation devices and other relevant devices
ISO 13982-2:2004	Protective clothing for use against solid particulates — Part 2: Test method of determination of inward leakage of aerosols of fine particles into suits
ISO 12401:2009	Small craft — Deck safety harness and safety line — Safety requirements and test methods
ISO 12312-1:2013	Eye and face protection Sunglasses and related eyewear Part 1: Sunglasses for general use
BS EN 13274-8:2002	RESPIRATORY PROTECTIVE DEVICES - METHODS FOR TEST - PART 8: DETERMINATION OF DOLOMITE DUST CLOGGING
BS EN 531:1995	PROTECTIVE CLOTHING FOR INDUSTRIAL WORKERS EXPOSED TO HEAT
BS EN 1149-1:2006	Protective clothing. Electrostatic properties Test method for measurement of surface resistivity
BS EN 207:2017	Personal eye-protection equipment. Filters and eye-protectors against laser radiation (laser eye-protectors)
BS EN 405 : 2002	RESPIRATORY PROTECTIVE DEVICES - VALVED FILTERING HALF MASKS TO PROTECT AGAINST GASES OR GASES AND PARTICLES - REQUIREMENTS, TESTING, MARKING
BS EN 352-6:2002	Hearing protectors. Safety requirements and testing Ear-muffs with electrical audio input
BS EN 145:1998	Respiratory protective devices. Self-contained closed-circuit breathing apparatus compressed oxygen or compressed oxygen-nitrogen type. Requirements, testing, marking
BS EN 943-1:2015+A1:2019	Protective clothing against dangerous solid, liquid and gaseous chemicals, including liquid and solid aerosols Performance requirements for Type 1 (gas-tight) chemical protective suits
BS EN 167:2002	PERSONAL EYE PROTECTION - OPTICAL TEST METHODS
BS EN ISO 13998:2003	Protective clothing. Aprons, trousers and vests protecting against cuts and stabs by hand knives
ISO 10256-1:2016	Protective equipment for use in ice hockey Part 1: General requirements
ISO 15027-1:2012	Immersion suits Part 1: Constant wear suits, requirements including safety
BS EN 13087-7:2000	PROTECTIVE HELMETS - TEST METHODS - PART 7: FLAME RESISTANCE
UNE-EN 71-4:2013	Safety of toys - Part 4: Experimental sets for chemistry and related activities
ISO 15025:2016	Protective clothing Protection against flame Method of test for limited flame spread
BS EN ISO 15027-1:2012	Immersion suits Constant wear suits, requirements including safety
BS EN 15090:2012	Footwear for firefighters
BS EN 379 : 2003	PERSONAL EYE-PROTECTION - AUTOMATIC WELDING FILTERS
BS EN 1077:2007	Helmets for alpine skiers and snowboarders
BS EN 1073-2:2002	Protective clothing against radioactive contamination Requirements and test methods for non-ventilated protective clothing against particulate radioactive contamination
BS EN 13277-3:2013	Protective equipment for martial arts Additional requirements and test methods for trunk protectors
BS EN ISO 12402-2 : 2006	PERSONAL FLOTATION DEVICES - PART 2: LIFEJACKETS, PERFORMANCE LEVEL 275 - SAFETY REQUIREMENTS
BS EN ISO 15025:2016	Protective clothing. Protection against flame. Method of test for limited flame spread
BS EN 12278:2007	Mountaineering equipment. Pulleys. Safety requirements and test methods
BS EN 14052 : 2012	HIGH PERFORMANCE INDUSTRIAL HELMETS
BS EN 12941 : 1999	RESPIRATORY PROTECTIVE DEVICES - POWERED FILTERING DEVICES INCORPORATING A HELMET OR A HOOD - REQUIREMENTS, TESTING, MARKING
I.S. EN 15567-1:2015	SPORTS AND RECREATIONAL FACILITIES - ROPES COURSES - PART 1: CONSTRUCTION AND SAFETY REQUIREMENTS
BS EN 13087-10:2012	Protective helmets. Test methods Resistance to radiant heat
BS EN 13595-3:2002	Protective clothing for professional motorcycle riders. Jackets, trousers and one piece or divided suits Test method for determination of burst strength
BS EN ISO 14460:1999	Protective clothing for automobile racing drivers. Protection against heat and flame. Performance requirements and test methods
BS EN 13595-4:2002	PROTECTIVE CLOTHING FOR PROFESSIONAL MOTORCYCLE RIDERS - JACKETS, TROUSERS AND ONE PIECE OR DIVIDED SUITS - PART 4: TEST METHOD FOR DETERMINATION OF IMPACT CUT RESISTANCE
BS EN 144-3:2003	Respiratory protective devices. Gas cylinder valves Outlet connections for diving gases Nitrox and oxygen
BS EN 174:2001	Personal eye-protection. Ski goggles for downhill skiing
ISO 12402-6:2006	Personal flotation devices Part 6: Special purpose lifejackets and buoyancy aids Safety requirements and additional test methods
BS EN 381-11:2002	Protective clothing for users of hand-held chain saws Requirements for upper body protectors
ISO 374-5:2016	Protective gloves against dangerous chemicals and micro-organisms Part 5: Terminology and performance requirements for micro-organisms risks
BS EN 148-2:1999	Respiratory protective devices: threads for facepieces Centre thread connection
BS EN 566:2017	Mountaineering equipment. Slings. Safety requirements and test methods
EN 353-2:2002	Personal protective equipment against falls from a height - Part 2: Guided type fall arresters including a flexible anchor line
EN 374-3:2003/AC:2006	PROTECTIVE GLOVES AGAINST CHEMICALS AND MICRO-ORGANISMS - PART 3: DETERMINATION OF RESISTANCE TO PERMEATION BY CHEMICALS
EN 1497:2007	Personal fall protection equipment - Rescue harnesses
EN ISO 10256:2003	Head and face protection for use in ice hockey (ISO 10256:2003)
EN 15151-1:2012	Mountaineering equipment - Braking devices - Part 1: Braking devices with manually assisted locking, safety requirements and test methods
EN 170:2002	Personal eye-protection - Ultraviolet filters - Transmittance requirements and recommended use
EN ISO 12312-1:2013/A1:2015	EYE AND FACE PROTECTION - SUNGLASSES AND RELATED EYEWEAR - PART 1: SUNGLASSES FOR GENERAL USE (ISO 12312-1:2013/AMD 1: 2015)
EN 207:2017	Personal eye-protection equipment - Filters and eye-protectors against laser radiation (laser eye-protectors)
EN 403:2004	Respiratory protective devices for self-rescue - Filtering devices with hood for escape from fire - Requirements, testing, marking
EN 15567-2:2015	Sports- and recreational facilities - Ropes courses - Part 2: Operation requirements
EN 1938:2010	Personal eye protection - Goggles for motorcycle and moped users
EN 13595-3:2002	Protective clothing for professional motorcycle riders - Jackets, trousers and one-piece or divided suits - Part 3: Test method for determination of burst strength
EN 365:2004/AC:2006	PERSONAL PROTECTIVE EQUIPMENT AGAINST FALLS FROM A HEIGHT - GENERAL REQUIREMENTS FOR INSTRUCTIONS FOR USE, MAINTENANCE, PERIODIC EXAMINATION, REPAIR, MARKING AND PACKAGING
EN 14120:2003+A1:2007	Protective clothing - Wrist, palm, knee and elbow protectors for users of roller sports equipment - Requirements and test methods
EN 14529:2005	Respiratory protective devices - Self-contained open-circuit compressed air breathing apparatus with half mask designed to include a positive pressure lung governed demand valve for escape purposes only
EN 16350:2014	Protective gloves - Electrostatic properties
EN 13594:2015	Protective gloves for motorcycle riders - Requirements and test methods
EN 361:2002	Personal protective equipment against falls from a height - Full body harnesses
EN ISO 22612:2005	Clothing for protection against infectious agents - Test method for resistance to dry microbial penetration (ISO 22612:2005)
EN 402:2003	Respiratory protective devices - Lung governed demand self-contained open-circuit compressed air breathing apparatus with full face mask or mouthpiece assembly for escape - Requirements, testing, marking
EN ISO 14877:2002	Protective clothing for abrasive blasting operations using granular abrasives (ISO 14877:2002)
EN 14021:2003	Stone shields for off-road motorcycling suited to protect riders against stones and debris - Requirements and test methods
EN 13795:2011+A1:2013	Surgical drapes, gowns and clean air suits, used as medical devices for patients, clinical staff and equipment - General requirements for manufacturers, processors and products, test methods, performance requirements and performance levels
EN 1827:1999+A1:2009	Respiratory protective devices - Half masks without inhalation valves and with separable filters to protect against gases or gases and particles or particles only - Requirements, testing, marking
EN 16805:2015	Diving equipment - Diving mask - Requirements and test methods
EN 15333-2:2009	Respiratory equipment - Open-circuit umbilical supplied compressed gas diving apparatus - Part 2: Free flow apparatus
EN 16716:2017	Mountaineering equipment - Avalanche airbag systems - Safety requirements and test methods
EN 15090:2012	Footwear for firefighters
EN ISO 13982-1:2004/A1:2010	Protective clothing for use against solid particulates - Part 1: Performance requirements for chemical protective clothing providing protection to the full body against airborne solid particulates (type 5 clothing) - Amendment 1 (ISO 13982-1:2004/Amd 1:2010)
EN 13921:2007	Personal protective equipment - Ergonomic principles
EN 397:2012+A1:2012	Industrial safety helmets
EN ISO 15027-1:2012	Immersion suits - Part 1: Constant wear suits, requirements including safety (ISO 15027-1:2012)
EN 14605:2005+A1:2009	Protective clothing against liquid chemicals - performance requirements for clothing with liquid-tight (Type 3) or spray-tight (Type 4) connections, including items providing protection to parts of the body only (Types PB [3] and PB [4])
EN 14435:2004	Respiratory protective devices - Self-contained open-circuit compressed air breathing apparatus with half mask designed to be used with positive pressure only - Requirements, testing, marking
EN ISO 20471:2013/A1:2016	HIGH VISIBILITY CLOTHING - TEST METHODS AND REQUIREMENTS (ISO 20471:2013/AMD 1:2016)
EN ISO 12311 : 2013 COR 2014	PERSONAL PROTECTIVE EQUIPMENT - TEST METHODS FOR SUNGLASSES AND RELATED EYEWEAR (ISO 12311:2013, CORRECTED VERSION 2014-08-15)
EN ISO 11612:2015	Protective clothing - Clothing to protect against heat and flame - Minimum performance requirements (ISO 11612:2015)
EN 16473:2014	Firefighters helmets - Helmets for technical rescue
EN 136:1998/AC:2003	RESPIRATORY PROTECTIVE DEVICES - FULL-FACE MASKS - REQUIREMENTS, TESTING, MARKING
EN ISO 17491-4:2008/A1:2016	Protective clothing - Test methods for clothing providing protection against chemicals - Part 4: Determination of resistance to penetration by a spray of liquid (spray test) (ISO 17491-4:2008/Amd 1:2016)
EN ISO 6530:2005	Protective clothing - Protection against liquid chemicals - Test method for resistance of materials to penetration by liquids (ISO 6530:2005)
EN 175:1997	Personal protection - Equipment for eye and face protection during welding and allied processes
EN ISO 13998:2003	Protective clothing - Aprons, trousers and vests protecting against cuts and stabs by hand knives (ISO 13998:2003)
EN 15649-1:2009+A2:2013	Floating leisure articles for use on and in the water - Part 1: Classification, materials, general requirements and test methods
EN 13595-1:2002	Protective clothing for professional motorcycle riders - Jackets, trousers and one piece or divided suits - Part 1: General requirements
EN 250:2014	Respiratory equipment - Open-circuit self-contained compressed air diving apparatus - Requirements, testing and marking
EN ISO 12127-2:2007	Clothing for protection against heat and flame - Determination of contact heat transmission through protective clothing or constituent materials - Part 2: Test method using contact heat produced by dropping small cylinders (ISO 12127-2:2007)
EN ISO 20346:2014	Personal protective equipment - Protective footwear (ISO 20346:2014)
EN 14360:2004	Protective clothing against rain - Test method for ready made garments - Impact from above with high energy droplets