EN 10113-2 : 1993
|
HOT-ROLLED PRODUCTS IN WELDABLE FINE GRAIN STRUCTURAL STEELS - DELIVERY CONDITIONS FOR NORMALIZED/NORMALIZED ROLLED STEELS |
EURONORM 54 : 1980
|
HOT-ROLLED SMALL U-BEAMS |
EN 10002-1 : 2001
|
METALLIC MATERIALS - TENSILE TESTING - PART 1: METHOD OF TEST AT AMBIENT TEMPERATURE |
EN 10052:1993
|
Vocabulary of heat treatment terms for ferrous products |
CR 10261 : 1995
|
ECISS INFORMATION CIRCULAR 11 - IRON AND STEEL - REVIEW OF AVAILABLE METHODS OF CHEMICAL ANALYSIS |
EN 10048:1996
|
Hot rolled narrow steel strip - Tolerances on dimensions and shape |
EN 10051:2010
|
Continuously hot-rolled strip and plate/sheet cut from wide strip of non-alloy and alloy steels - Tolerances on dimensions and shape |
BS 31:1940
|
Specification. Steel conduit and fittings for electrical wiring |
EN 10079:2007
|
Definition of steel products |
EN 10149-1:2013
|
Hot rolled flat products made of high yield strength steels for cold forming - Part 1: General technical delivery conditions |
EN 10027-2:2015
|
DESIGNATION SYSTEMS FOR STEELS - PART 2: NUMERICAL SYSTEM |
EN 10221:1995
|
Surface quality classes for hot-rolled bars and rods - Technical delivery conditions |
EN 10137-1 : 1995
|
PLATES AND WIDE FLATS MADE OF HIGH YIELD STRENGTH STRUCTURAL STEELS IN THE QUENCHED AND TEMPERED OR PRECIPITATION HARDENED CONDITIONS - GENERAL DELIVERY CONDITIONS |
EN 10029:2010
|
Hot-rolled steel plates 3 mm thick or above - Tolerances on dimensions and shape |
EN 10137-3 : 1995
|
PLATES AND WIDE FLATS MADE OF HIGH YIELD STRENGTH STRUCTURAL STEELS IN THE QUENCHED AND TEMPERED OR PRECIPITATION HARDENED CONDITIONS - DELIVERY CONDITIONS FOR PRECIPITATION HARDENED STEELS |
EN 10056-2:1993
|
Structural steel equal and unequal leg angles - Part 2: Tolerances on shape and dimensions |
EN 10164:2004
|
Steel products with improved deformation properties perpendicular to the surface of the product - Technical delivery conditions |
EN ISO 377:2017
|
Steel and steel products - Location and preparation of samples and test pieces for mechanical testing (ISO 377:2017) |
PREN 10025-2 : DRAFT 2011
|
HOT ROLLED PRODUCTS OF STRUCTURAL STEELS - PART 2: TECHNICAL DELIVERY CONDITIONS FOR NON-ALLOY STRUCTURAL STEELS |
EN 10149-2:2013
|
Hot rolled flat products made of high yield strength steels for cold forming - Part 2: Technical delivery conditions for thermomechanically rolled steels |
EN 10034:1993
|
Structural steel I and H sections - Tolerances on shape and dimensions |
EN 10248-1:1995
|
Hot rolled sheet piling of non alloy steels - Part 1: Technical delivery conditions |
EURONORM 53 : 1962
|
HOT-ROLLED BROAD FLANGED I-BEAMS (WIDE-FLANGED I-BEAMS) WITH PARALLEL FLANGE FACINGS |
EURONORM 103 : 1971
|
MICROSCOPIC DETERMINATION OF THE FERRITE OR AUSTENITIC GRAIN SIZE OF STEELS |
EN 10024:1995
|
Hot rolled taper flange I sections - Tolerances on shape and dimensions |
EN 10210-1:2006
|
Hot finished structural hollow sections of non-alloy and fine grain steels - Part 1: Technical delivery conditions |
EURONORM 60 : 1977
|
HOT-ROLLED ROUND STEEL FOR GENERAL USE |
EN 10045-1 : 1990
|
METALLIC MATERIALS - CHARPY IMPACT TEST - PART 1: TEST METHOD |
EURONORM 19 : 1957
|
IPE BEAMS - I-BEAMS WITH PARALLEL FLANGE FACINGS |
EN 10137-2 : 1995
|
PLATES AND WIDE FLATS MADE OF HIGH YIELD STRENGTH STRUCTURAL STEELS IN THE QUENCHED AND TEMPERED OR PRECIPITATION HARDENED CONDITIONS - DELIVERY CONDITIONS FOR QUENCHED AND TEMPERED STEELS |
EN 10163-2:2004
|
Delivery requirements for surface condition of hot-rolled steel plates, wide flats and sections - Part 2: Plate and wide flats |
EN 10163-1:2004/AC:2007
|
DELIVERY REQUIREMENTS FOR SURFACE CONDITION OF HOT-ROLLED STEEL PLATES, WIDE FLATS AND SECTIONS - PART 1: GENERAL REQUIREMENTS |
PREN 10056-1 : DRAFT 2015
|
STRUCTURAL STEEL EQUAL AND UNEQUAL LEG ANGLES - PART 1: DIMENSIONS |
EN 10113-1 : 1993
|
HOT ROLLED PRODUCTS IN WELDABLE FINE GRAIN STRUCTURAL STEELS - GENERAL DELIVERY CONDITIONS |
EN 10219-1:2006
|
Cold formed welded structural hollow sections of non-alloy and fine grain steels - Part 1: Technical delivery conditions |
EURONORM 65 : 1980
|
HOT-ROLLED ROUND STEEL FOR SCREWS AND RIVETS |
EN 10021:2006
|
General technical delivery conditions for steel products |
EURONORM 61 : 1982
|
HOT-ROLLED HEXAGON STEEL |
EURONORM 58 : 1978
|
HOT-ROLLED FLAT STEEL FOR GENERAL USE |
ISO 2566-1:1984
|
Steel Conversion of elongation values Part 1: Carbon and low alloy steels |
EURONORM 186 : 1987
|
ULTRASONIC TESTING OF BROAD FLANGED BEAMS WITH PARALLEL FLANGES AND IPE BEAMS |
EN 10163-3:2004
|
Delivery requirements for surface condition of hot-rolled steel plates, wide flats and sections - Part 3: Sections |
EN 10204:2004
|
Metallic products - Types of inspection documents |
PREN 10025-3 : DRAFT 2011
|
HOT ROLLED PRODUCTS OF STRUCTURAL STEELS - PART 3: TECHNICAL DELIVERY CONDITIONS FOR NORMALIZED/NORMALIZED ROLLED WELDABLE FINE GRAIN STRUCTURAL STEELS |
EN 10155 : 1993
|
STRUCTURAL STEELS WITH IMPROVED ATMOSPHERIC CORROSION RESISTANCE - TECHNICAL DELIVERY CONDITIONS |
EN 10027-1:2016
|
Designation systems for steels - Part 1: Steel names |
EURONORM 168 : 1986
|
IRON AND STEEL PRODUCTS - INSPECTION DOCUMENTS, CONTENTS |
EN 10055:1995
|
Hot rolled steel equal flange tees with radiused root and toes - Dimensions and tolerances on shape and dimensions |
EURONORM 59 : 1978
|
HOT-ROLLED SQUARE STEEL FOR GENERAL USE |
EN 10249-1:1995
|
Cold formed sheet piling of non alloy steels - Part 1: Technical delivery conditions |
EN 10067:1996
|
Hot rolled bulb flats - Dimensions and tolerances on shape, dimensions and mass |
ISO 14284:1996
|
Steel and iron — Sampling and preparation of samples for the determination of chemical composition |
EN 10149-3:2013
|
Hot rolled flat products made of high yield strength steels for cold forming - Part 3: Technical delivery conditions for normalized or normalized rolled steels |
EURONORM 66 : 1967
|
HOT-ROLLED HALF-ROUND BARS AND FLAT HALF ROUNDS |
EURONORM 17 : 1970
|
WIRE ROD OF COMMON UNALLOYED STEELS FOR DRAWING; DIMENSIONS AND PERMISSIBLE DEVIATIONS |
CR 10260 : 1998
|
DESIGNATION SYSTEMS FOR STEEL - ADDITIONAL SYMBOLS |
EN 10113-3 : 1993
|
HOT ROLLED PRODUCTS IN WELDABLE FINE GRAIN STRUCTURAL STEELS - DELIVERY CONDITIONS FOR THERMOMECHANICAL ROLLED STEELS |