AASHTO M 231 : 1995
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
SPECIFICATION FOR WEIGHING DEVICES USED IN THE TESTING OF MATERIALS
09-01-2023
01-01-2015
1. SCOPE
2. REFERENCED DOCUMENTS
3. CLASSIFICATION
4. TERMINOLOGY
5. REQUIREMENTS
6. KEYWORDS
Describes requirements for scales and balances, and the loose standard masses used with balances, used in the testing of construction materials.
DevelopmentNote |
Included in AASHTO HM. (09/2013)
|
DocumentType |
Standard
|
PublisherName |
American Association of State Highway and Transportation Officials
|
Status |
Superseded
|
SupersededBy |
AASHTO T 180 : 2015 | METHOD OF TEST FOR MOISTURE-DENSITY RELATIONS OF SOILS USING A 4.54-KG (10-LB) RAMMER AND A 457-MM (18-IN.) DROP |
AASHTO T 99 : 2015 | METHOD OF TEST FOR MOISTURE-DENSITY RELATIONS OF SOILS USING A 2.5-KG (5.5-LB) RAMMER AND A 305-MM (12-IN.) DROP |
AASHTO T 167 : 2010 | METHOD OF TEST FOR COMPRESSIVE STRENGTH OF HOT MIX ASPHALT |
AASHTO T 281 : 2014(R2018) | METHOD OF TEST FOR VITRIFIED CLAY PIPE |
AASHTO T 255 : 2000 | METHOD OF TEST FOR TOTAL EVAPORABLE MOISTURE CONTENT OF AGGREGATE BY DRYING |
AASHTO T 348 : 2013(R2018) | TEST METHOD FOR AIR-VOID CHARACTERISTICS OF FRESHLY MIXED CONCRETE BY BUOYANCY CHANGE |
AASHTO T 335 : 2009 | METHOD OF TEST FOR DETERMINING THE PERCENTAGE OF FRACTURE IN COARSE AGGREGATE |
AASHTO PP 77 : 2014 | PRACTICE FOR MATERIALS SELECTION AND MIXTURE DESIGN OF PERMEABLE FRICTION COURSES (PFCS) |
AASHTO TP 108 : 2014 | METHOD OF TEST FOR ABRASION LOSS OF ASPHALT MIXTURE SPECIMENS |
AASHTO T 280 : 2014 | METHOD OF TEST FOR CONCRETE PIPE, MANHOLE SECTIONS, OR TILE |
AASHTO T 329 : 2015 | METHOD OF TEST FOR MOISTURE CONTENT OF ASPHALT MIXTURES BY OVEN METHOD |
AASHTO R 28 : 2012 | PRACTICE FOR ACCELERATED AGING OF ASPHALT BINDER USING A PRESSURIZED AGING VESSEL (PAV) |
AASHTO T 219 : 1987 | METHOD OF TEST FOR TESTING LIME FOR CHEMICAL CONSTITUENTS AND PARTICLE SIZES |
AASHTO T 260 : 1997(R2016) | METHOD OF TEST FOR SAMPLING AND TESTING FOR CHLORIDE ION IN CONCRETE AND CONCRETE RAW MATERIALS |
AASHTO T 210 : 2015 | METHOD OF TEST FOR AGGREGATE DURABILITY INDEX |
AASHTO T 211 : 1990 | METHOD OF TEST FOR DETERMINATION OF CEMENT CONTENT IN CEMENT-TREATED AGGREGATE BY THE METHOD OF TITRATION |
AASHTO T 312 : 2015 | METHOD OF TEST FOR PREPARING AND DETERMINING THE DENSITY OF ASPHALT MIXTURE SPECIMENS BY MEANS OF THE SUPERPAVE GYRATORY COMPACTOR |
AASHTO T 179 : 2005 | METHOD OF TEST FOR EFFECT OF HEAT AND AIR ON ASPHALT MATERIALS (THIN-FILM OVEN TEST) |
AASHTO T 287 : 2014 | METHOD OF TEST FOR ASPHALT BINDER CONTENT OF ASPHALT MIXTURES BY THE NUCLEAR METHOD |
AASHTO T 289 : 1991 | METHOD OF TEST FOR DETERMINING PH OF SOIL FOR USE IN CORROSION TESTING |
AASHTO TP 72 : 2008 : R2015 | METHOD OF TEST FOR QUANTITATIVE DETERMINATION OF THE PERCENTAGE OF LIME IN HOT MIX ASPHALT (HMA) |
AASHTO T 100 : 2015 | METHOD OF TEST FOR SPECIFIC GRAVITY OF SOILS |
AASHTO T 233 : 2002 : R2010 | METHOD OF TEST FOR DENSITY OF SOIL IN-PLACE BY BLOCK, CHUNK, OR CORE SAMPLING |
AASHTO T 319 : 2015 | METHOD OF TEST FOR QUANTITATIVE EXTRACTION AND RECOVERY OF ASPHALT BINDER FROM ASPHALT MIXTURES |
AASHTO T 27 : 2014 | METHOD OF TEST FOR SIEVE ANALYSIS OF FINE AND COARSE AGGREGATES |
AASHTO T 265 : 2015 | METHOD OF TEST FOR LABORATORY DETERMINATION OF MOISTURE CONTENT OF SOILS |
AASHTO T 327 : 2012 | METHOD OF TEST FOR RESISTANCE OF COARSE AGGREGATE TO DEGRADATION BY ABRASION IN THE MICRO-DEVAL APPARATUS |
AASHTO T 104 : 1999 | METHOD OF TEST FOR SOUNDNESS OF AGGREGATE BY USE OF SODIUM SULFATE OR MAGNESIUM SULFATE |
AASHTO R 58 : 2011 | PRACTICE FOR DRY PREPARATION OF DISTURBED SOIL AND SOIL-AGGREGATE SAMPLES FOR TEST |
AASHTO T 215 : 2014(R2018) | METHOD OF TEST FOR PERMEABILITY OF GRANULAR SOILS (CONSTANT HEAD) |
AASHTO T 78 : 2015 | METHOD OF TEST FOR DISTILLATION OF CUTBACK ASPHALT PRODUCTS |
AASHTO T 90 : 2015 | METHOD OF TEST FOR DETERMINING THE PLASTIC LIMIT AND PLASTICITY INDEX OF SOILS |
AASHTO TP 102 : 2012 : R2015 | METHOD OF TEST FOR EVALUATION OF ASPHALT RELEASE AGENTS (ARAS) |
AASHTO TP 102 : 2012 | METHOD OF TEST FOR EVALUATION OF ASPHALT RELEASE AGENTS (ARAS) |
AASHTO T 111 : 2011 : R2015 | METHOD OF TEST FOR MINERAL MATTER OR ASH IN ASPHALT MATERIALS |
AASHTO T 102 : 2009(R2018) | METHOD OF TEST FOR SPOT TEST OF ASPHALTIC MATERIALS |
AASHTO T 42 : 2010 | METHOD OF TEST FOR PREFORMED EXPANSION JOINT FILLER FOR CONCRETE CONSTRUCTION |
AASHTO T 291 : 1994 | METHOD OF TEST FOR DETERMINING WATER-SOLUBLE CHLORIDE ION CONTENT IN SOIL |
AASHTO T 112 : 2000 | METHOD OF TEST FOR CLAY LUMPS AND FRIABLE PARTICLES IN AGGREGATE |
AASHTO T 330 : 2007 : R2011 | METHOD OF TEST FOR THE QUALITATIVE DETECTION OF HARMFUL CLAYS OF THE SMECTITE GROUP IN AGGREGATES USING METHYLENE BLUE |
AASHTO T 71 : 2008 : R2012 | METHOD OF TEST FOR EFFECT OF ORGANIC IMPURITIES IN FINE AGGREGATE ON STRENGTH OF MORTAR |
AASHTO PP 75 : 2013 : R2015 | PRACTICE FOR VACUUM DRYING COMPACTED ASPHALT SPECIMENS |
AASHTO T 136 : 2013 | METHOD OF TEST FOR FREEZING-AND-THAWING TESTS OF COMPACTED SOIL-CEMENT MIXTURES |
AASHTO TP 81 : 2012 : R2015 | METHOD OF TEST FOR DETERMINING AGGREGATE SHAPE PROPERTIES BY MEANS OF DIGITAL IMAGE ANALYSIS |
AASHTO T 103 : 2008 | METHOD OF TEST FOR SOUNDNESS OF AGGREGATES BY FREEZING AND THAWING |
AASHTO T 134 : 2005 | METHOD OF TEST FOR MOISTURE-DENSITY RELATIONS OF SOIL-CEMENT MIXTURES |
AASHTO T 19M/T 19 : 1900 | METHOD OF TEST FOR BULK DENSITY ('UNIT WEIGHT') AND VOIDS IN AGGREGATE |
AASHTO R 79 : 2016 | STANDARD PRACTICE FOR VACUUM DRYING COMPACTED ASPHALT SPECIMENS |
AASHTO T 113 : 2015 | METHOD OF TEST FOR LIGHTWEIGHT PIECES IN AGGREGATE |
AASHTO T 164 : 2014(R2018) | Standard Method of Test for Quantitative Extraction of Asphalt Binder from Hot Mix Asphalt (HMA) |
AASHTO TP 115 : 2015 | METHOD OF TEST FOR DETERMINING THE QUALITY OF TACK COAT ADHESION TO THE SURFACE OF AN ASPHALT PAVEMENT IN THE FIELD OR LABORATORY |
AASHTO T 102 : 2009 | METHOD OF TEST FOR SPOT TEST OF ASPHALTIC MATERIALS |
AASHTO TP 120 : 2016 | METHOD OF TEST FOR PORE INDEX FOR CARBONATE COARSE AGGREGATE |
AASHTO T 311 : 2000(R2015) | METHOD OF TEST FOR GRAIN-SIZE ANALYSIS OF GRANULAR SOIL MATERIALS |
AASHTO TP 114 : 2015 | METHOD OF TEST FOR DETERMINING THE INTERLAYER SHEAR STRENGTH (ISS) OF ASPHALT PAVEMENT LAYERS |
AASHTO PP 75 : 2013 | PRACTICE FOR VACUUM DRYING COMPACTED ASPHALT SPECIMENS |
AASHTO T 89 : 2013 | METHOD OF TEST FOR DETERMINING THE LIQUID LIMIT OF SOILS |
AASHTO T 178 : 2015(R2019) | METHOD OF TEST FOR PORTLAND-CEMENT CONTENT OF HARDENED HYDRAULIC-CEMENT CONCRETE |
AASHTO T 308 : 2010 | METHOD OF TEST FOR DETERMINING THE ASPHALT BINDER CONTENT OF HOT MIX ASPHALT (HMA) BY THE IGNITION METHOD |
AASHTO T 88 : 2013 | METHOD OF TEST FOR PARTICLE SIZE ANALYSIS OF SOILS |
AASHTO T 44 : 2014 | METHOD OF TEST FOR SOLUBILITY OF BITUMINOUS MATERIALS |
AASHTO T 59 : 2015 | METHOD OF TEST FOR EMULSIFIED ASPHALTS |
AASHTO T 354 : 2015 | METHOD OF TEST FOR SPECIFIC GRAVITY AND ABSORPTION OF AGGREGATE BY VOLUMETRIC IMMERSION METHOD |
AASHTO T 240 : 2013 | METHOD OF TEST FOR EFFECT OF HEAT AND AIR ON A MOVING FILM OF ASPHALT BINDER (ROLLING THIN-FILM OVEN TEST) |
AASHTO T 290 : 1995 | METHOD OF TEST FOR DETERMINING WATER-SOLUBLE SULFATE ION CONTENT IN SOIL |
AASHTO T 179 : 2005 : R2018 | METHOD OF TEST FOR EFFECT OF HEAT AND AIR ON ASPHALT MATERIALS (THIN-FILM OVEN TEST) |
AASHTO T 267 : 1986 | METHOD OF TEST FOR DETERMINATION OF ORGANIC CONTENT IN SOILS BY LOSS ON IGNITION |
AASHTO T 167 : 2010 : R2015 | METHOD OF TEST FOR COMPRESSIVE STRENGTH OF HOT MIX ASPHALT |
AASHTO T 111 : 2011 | METHOD OF TEST FOR MINERAL MATTER OR ASH IN ASPHALT MATERIALS |
AASHTO TP 82 : 2010 : R2012 | BULK SPECIFIC GRAVITY (G[MB]) OF COMPACTED ASPHALT MIXTURES USING WATER DISPLACEMENT MEASURED BY PRESSURE SENSOR |
AASHTO T 362 : 2017 | METHOD OF TEST FOR QUANTITATIVE DETERMINATION OF THE PERCENTAGE OF LIME IN ASPHALT MIXTURES |
AASHTO T 143 : 2013 | METHOD OF TEST FOR SAMPLING AND TESTING CALCIUM CHLORIDE FOR ROADS AND STRUCTURAL APPLICATIONS |
AASHTO T 191 : 2014 | METHOD OF TEST FOR DENSITY OF SOIL IN-PLACE BY THE SAND-CONE METHOD |
AASHTO T 311 : 2000 : R2010 | METHOD OF TEST FOR GRAIN-SIZE ANALYSIS OF GRANULAR SOIL MATERIALS |
AASHTO T 37 : 2007 : R2011 | METHOD OF TEST FOR SIEVE ANALYSIS OF MINERAL FILLER FOR HOT MIX ASPHALT (HMA) |
AASHTO T 84 : 2013 | METHOD OF TEST FOR SPECIFIC GRAVITY AND ABSORPTION OF FINE AGGREGATE |
AASHTO R 68 : 2015 | PRACTICE FOR PREPARATION OF ASPHALT MIXTURES BY MEANS OF THE MARSHALL APPARATUS |
AASHTO R 58 : 2011 : R2015 | PRACTICE FOR DRY PREPARATION OF DISTURBED SOIL AND SOIL-AGGREGATE SAMPLES FOR TEST |
AASHTO T 209 : 2012 | METHOD OF TEST FOR THEORETICAL MAXIMUM SPECIFIC GRAVITY (G[MM]) AND DENSITY OF HOT MIX ASPHALT (HMA) |
AASHTO T 42 : 2010 : R2015 | METHOD OF TEST FOR PREFORMED EXPANSION JOINT FILLER FOR CONCRETE CONSTRUCTION |
AASHTO T 217 : 2014 | METHOD OF TEST FOR DETERMINATION OF MOISTURE IN SOILS BY MEANS OF A CALCIUM CARBIDE GAS PRESSURE MOISTURE TESTER |
AASHTO T 331 : 2013 | METHOD OF TEST FOR BULK SPECIFIC GRAVITY (G[MB]) AND DENSITY OF COMPACTED ASPHALT MIXTURES USING AUTOMATIC VACUUM SEALING METHOD |
AASHTO TP 77 : 2014 | METHOD OF TEST FOR SPECIFIC GRAVITY AND ABSORPTION OF AGGREGATE BY VOLUMETRIC IMMERSION METHOD |
AASHTO T 166 : 2013 | METHOD OF TEST FOR BULK SPECIFIC GRAVITY (G[MB]) OF COMPACTED ASPHALT MIXTURES USING SATURATED SURFACE-DRY SPECIMENS |
AASHTO T 288 : 2012 | METHOD OF TEST FOR DETERMINING MINIMUM LABORATORY SOIL RESISTIVITY |
AASHTO T 308 : 2010 : R2015 | METHOD OF TEST FOR DETERMINING THE ASPHALT BINDER CONTENT OF HOT MIX ASPHALT (HMA) BY THE IGNITION METHOD |
AASHTO T 330 : 2007 : R2015 | METHOD OF TEST FOR THE QUALITATIVE DETECTION OF HARMFUL CLAYS OF THE SMECTITE GROUP IN AGGREGATES USING METHYLENE BLUE |
AASHTO T 190 : 2014 | METHOD OF TEST FOR RESISTANCE R-VALUE AND EXPANSION PRESSURE OF COMPACTED SOILS |
AASHTO T 318 : 2015(R2019) | METHOD OF TEST FOR WATER CONTENT OF FRESHLY MIXED CONCRETE USING MICROWAVE OVEN DRYING |
AASHTO T 176 : 2008 | METHOD OF TEST FOR PLASTIC FINES IN GRADED AGGREGATES AND SOILS BY USE OF THE SAND EQUIVALENT TEST |
AASHTO T 233 : 2002(R2015) | METHOD OF TEST FOR DENSITY OF SOIL IN-PLACE BY BLOCK, CHUNK, OR CORE SAMPLING |
AASHTO T 275 : 2007 | METHOD OF TEST FOR BULK SPECIFIC GRAVITY ( G[MB]) OF COMPACTED ASPHALT MIXTURES USING PARAFFIN-COATED SPECIMENS |
AASHTO T 85 : 2014 | STANDARD METHOD OF TEST FOR SPECIFIC GRAVITY AND ABSORPTION OF COARSE AGGREGATE |
AASHTO T 135 : 2013 | METHOD OF TEST FOR WETTING-AND-DRYING TEST OF COMPACTED SOIL-CEMENT MIXTURES |
AASHTO TP 81 : 2012 | METHOD OF TEST FOR DETERMINING AGGREGATE SHAPE PROPERTIES BY MEANS OF DIGITAL IMAGE ANALYSIS |
AASHTO T 232 : 1990(R2018) | METHOD OF TEST FOR DETERMINATION OF LIME CONTENT IN LIME-TREATED SOILS BY TITRATION |
AASHTO T 11 : 2005 : R2013 | METHOD OF TEST FOR MATERIALS FINER THAN 75-[MU]M (NO. 200) SIEVE IN MINERAL AGGREGATES BY WASHING |
AASHTO T 302 : 2015 | METHOD OF TEST FOR POLYMER CONTENT OF POLYMER-MODIFIED EMULSIFIED ASPHALT RESIDUE AND ASPHALT BINDERS |
AASHTO T 329 : 2015(R2019) | Standard Method of Test for Moisture Content of Asphalt Mixtures by Oven Method |
AASHTO T 332 : 2007(R2016) | METHOD OF TEST FOR DETERMINING CHLORIDE IONS IN CONCRETE AND CONCRETE MATERIALS BY SPECIFIC ION PROBE |
AASHTO T 30 : 2015 | METHOD OF TEST FOR MECHANICAL ANALYSIS OF EXTRACTED AGGREGATE |
AASHTO T 71 : 2008 : R2012 | METHOD OF TEST FOR EFFECT OF ORGANIC IMPURITIES IN FINE AGGREGATE ON STRENGTH OF MORTAR |
AASHTO T 194 : 1997(R2018) | METHOD OF TEST FOR DETERMINATION OF ORGANIC MATTER IN SOILS BY WET COMBUSTION |
AASHTO TP 72 : 2008 : R2013 | METHOD OF TEST FOR QUANTITATIVE DETERMINATION OF THE PERCENTAGE OF LIME IN HOT MIX ASPHALT (HMA) |
AASHTO T 208 : 2015 | METHOD OF TEST FOR UNCONFINED COMPRESSIVE STRENGTH OF COHESIVE SOIL |
AASHTO T 208 : 2015(R2019) | METHOD OF TEST FOR UNCONFINED COMPRESSIVE STRENGTH OF COHESIVE SOIL |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.