AASHTO T 312 : 2015
Superseded
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
METHOD OF TEST FOR PREPARING AND DETERMINING THE DENSITY OF ASPHALT MIXTURE SPECIMENS BY MEANS OF THE SUPERPAVE GYRATORY COMPACTOR
Available format(s)
Hardcopy , PDF
Superseded date
08-08-2019
Superseded by
Language(s)
English
Published date
01-01-2015
Important note : Users cannot be edited or removed once added to your Multi user PDF.
1. SCOPE
2. REFERENCED DOCUMENTS
3. SIGNIFICANCE AND USE
4. APPARATUS
5. HAZARDS
6. STANDARDIZATION
7. PREPARATION OF APPARATUS
8. HMA MIXTURE PREPARATION
9. COMPACTION PROCEDURE
10. DENSITY PROCEDURE
11. DENSITY CALCULATIONS
12. REPORT
13. PRECISION AND BIAS
14. KEYWORDS
ANNEX A (Mandatory Information) - EVALUATING SUPERPAVE
GYRATORY COMPACTOR (SGC) MOLDS
A1. SCOPE
A2. APPARATUS
A3. PROCEDURE FOR VISUALLY INSPECTING THE
CONDITION OF THE MOLD
A4. PROCEDURE FOR MEASURING THE INSIDE DIAMETER OF
SUPERPAVE GYRATORY MOLDS WITH A THREE-POINT
BORE GAUGE
A5. PROCEDURE FOR MEASURING THE INSIDE DIAMETER OF
SUPERPAVE GYRATORY MOLDS WITH A COORDINATE
MEASUREMENT MACHINE (CMM)
A6. PROCEDURE FOR MEASURING THE OUTSIDE DIAMETER OF
SUPERPAVE GYRATORY COMPACTOR MOLD END PLATES
A7. INSPECTION REPORT
Describes the compaction of cylindrical specimens of asphalt mixtures using the Superpave gyratory compactor.
| DevelopmentNote |
Included in AASHTO HM. (10/2013)
|
| DocumentType |
Standard
|
| Pages |
14
|
| ProductNote |
pages has been updated price has been updated
|
| PublisherName |
American Association of State Highway and Transportation Officials
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes |
| AASHTO T 340 : 2010 | METHOD OF TEST FOR DETERMINING RUTTING SUSCEPTIBILITY OF HOT MIX ASPHALT (HMA) USING THE ASPHALT PAVEMENT ANALYZER (APA) |
| AASHTO R 42 : 2006(R 2016) | PRACTICE FOR DEVELOPING A QUALITY ASSURANCE PLAN FOR HOT MIX ASPHALT (HMA) |
| AASHTO T 320 : 2007 | METHOD OF TEST FOR DETERMINING THE PERMANENT SHEAR STRAIN AND STIFFNESS OF ASPHALT MIXTURES USING THE SUPERPAVE SHEAR TESTER (SST) |
| AASHTO R 42 : 2006 : R2011 | PRACTICE FOR DEVELOPING A QUALITY ASSURANCE PLAN FOR HOT MIX ASPHALT (HMA) |
| AASHTO TP 105 : 2013 : R2015 | METHOD OF TEST FOR DETERMINING THE FRACTURE ENERGY OF ASPHALT MIXTURES USING THE SEMICIRCULAR BEND GEOMETRY (SCB) |
| AASHTO R 30 : 2002 : R2015 | PRACTICE FOR MIXTURE CONDITIONING OF HOT MIX ASPHALT (HMA) |
| AASHTO TP 124 : 2016 | METHOD OF TEST FOR DETERMINING THE FRACTURE POTENTIAL OF ASPHALT MIXTURES USING SEMICIRCULAR BEND GEOMETRY (SCB) AT INTERMEDIATE TEMPERATURE |
| AASHTO M 156 : 2013 | SPECIFICATION FOR REQUIREMENTS FOR MIXING PLANTS FOR HOT-MIXED, HOT-LAID BITUMINOUS PAVING MIXTURES |
| AASHTO R 15 : 2000 : R2012 | PRACTICE FOR ASPHALT ADDITIVES AND MODIFIERS |
| ASTM D 6925 : 2015 : REDLINE | Standard Test Method for Preparation and Determination of the Relative Density of Asphalt Mix Specimens by Means of the Superpave Gyratory Compactor |
| AASHTO TP 105 : 2013 | METHOD OF TEST FOR DETERMINING THE FRACTURE ENERGY OF ASPHALT MIXTURES USING THE SEMICIRCULAR BEND GEOMETRY (SCB) |
| AASHTO PP 60 : 2014 | PRACTICE FOR PREPARATION OF CYLINDRICAL PERFORMANCE TEST SPECIMENS USING THE SUPERPAVE GYRATORY COMPACTOR (SGC) |
| AASHTO TP 82 : 2010 : R2012 | BULK SPECIFIC GRAVITY (G[MB]) OF COMPACTED ASPHALT MIXTURES USING WATER DISPLACEMENT MEASURED BY PRESSURE SENSOR |
| DVGW G 440-B1 Merkblatt 9:2018 | Explosion protection document for plants and systems for public gas supply; 1. Supplement: Amendment of the example for Gas-Pressure-Regulating and Measuring Stations |
| AASHTO R 25 : 2000 : R2013 | PRACTICE FOR TECHNICIAN TRAINING AND QUALIFICATION PROGRAMS |
| AASHTO TP 114 : 2015 | METHOD OF TEST FOR DETERMINING THE INTERLAYER SHEAR STRENGTH (ISS) OF ASPHALT PAVEMENT LAYERS |
| ASTM D 7064 : 2004 | Standard Practice for Open-Graded Friction Course (OGFC) Mix Design |
| AASHTO T 324 : 2014 | METHOD OF TEST FOR HAMBURG WHEEL-TRACK TESTING OF COMPACTED ASPHALT MIXTURES |
| AASHTO T 342 : 2011(R2019) | Standard Method of Test for Determining Dynamic Modulus of Hot Mix Asphalt (HMA) |
| AASHTO M 325 : 2008 | SPECIFICATION FOR STONE MATRIX ASPHALT (SMA) |
| AASHTO TP 102 : 2012 | METHOD OF TEST FOR EVALUATION OF ASPHALT RELEASE AGENTS (ARAS) |
| AASHTO R 46 : 2008 : R2012 | PRACTICE FOR DESIGNING STONE MATRIX ASPHALT (SMA) |
| AASHTO PP 77 : 2014 | PRACTICE FOR MATERIALS SELECTION AND MIXTURE DESIGN OF PERMEABLE FRICTION COURSES (PFCS) |
| AASHTO PP 76 : 2013 | PRACTICE FOR TROUBLESHOOTING ASPHALT SPECIMEN VOLUMETRIC DIFFERENCES BETWEEN SUPERPAVE GYRATORY COMPACTORS (SGCS) USED IN THE DESIGN AND THE FIELD MANAGEMENT OF SUPERPAVE MIXTURES |
| AASHTO T 331 : 2013 | METHOD OF TEST FOR BULK SPECIFIC GRAVITY (G[MB]) AND DENSITY OF COMPACTED ASPHALT MIXTURES USING AUTOMATIC VACUUM SEALING METHOD |
| AASHTO M 323 : 2013 | SPECIFICATION FOR SUPERPAVE VOLUMETRIC MIX DESIGN |
| AASHTO T 342 : 2011 | METHOD OF TEST FOR DETERMINING DYNAMIC MODULUS OF HOT MIX ASPHALT (HMA) |
| AASHTO T 283 : 2014 | METHOD OF TEST FOR RESISTANCE OF COMPACTED ASPHALT MIXTURES TO MOISTURE-INDUCED DAMAGE |
| ASTM D 6931 : 2017 : REDLINE | Standard Test Method for Indirect Tensile (IDT) Strength of Asphalt Mixtures |
| AASHTO R 83 : 2017 | PRACTICE FOR PREPARATION OF CYLINDRICAL PERFORMANCE TEST SPECIMENS USING THE SUPERPAVE GYRATORY COMPACTOR (SGC) |
| AASHTO T 246 : 2010 : R2015 | METHOD OF TEST FOR RESISTANCE TO DEFORMATION AND COHESION OF HOT MIX ASPHALT (HMA) BY MEANS OF HVEEM APPARATUS |
| AASHTO T 342 : 2011 : R2015 | METHOD OF TEST FOR DETERMINING DYNAMIC MODULUS OF HOT MIX ASPHALT (HMA) |
| AASHTO T 322 : 2007 | METHOD OF TEST FOR DETERMINING THE CREEP COMPLIANCE AND STRENGTH OF HOT MIX ASPHALT (HMA) USING THE INDIRECT TENSILE TEST DEVICE |
| AASHTO R 30 : 2002 : R2010 | PRACTICE FOR MIXTURE CONDITIONING OF HOT MIX ASPHALT (HMA) |
| AASHTO T 340 : 2010 : R2015 | METHOD OF TEST FOR DETERMINING RUTTING SUSCEPTIBILITY OF HOT MIX ASPHALT (HMA) USING THE ASPHALT PAVEMENT ANALYZER (APA) |
| AASHTO R 35 : 2015 | PRACTICE FOR SUPERPAVE VOLUMETRIC DESIGN FOR ASPHALT MIXTURES |
| AASHTO PP 86 : 2017 | Standard Practice for Emulsified Asphalt Content of Cold Recycled Mixture Designs |
| AASHTO TP 102 : 2012 : R2015 | METHOD OF TEST FOR EVALUATION OF ASPHALT RELEASE AGENTS (ARAS) |
| AASHTO T 344 : 2012 | METHOD OF TEST FOR EVALUATION OF SUPERPAVE GYRATORY COMPACTOR (SGC) INTERNAL ANGLE OF GYRATION USING SIMULATED LOADING |
| AASHTO TP 108 : 2014 | METHOD OF TEST FOR ABRASION LOSS OF ASPHALT MIXTURE SPECIMENS |
| AASHTO PP 76 : 2013 : R2015 | PRACTICE FOR TROUBLESHOOTING ASPHALT SPECIMEN VOLUMETRIC DIFFERENCES BETWEEN SUPERPAVE GYRATORY COMPACTORS (SGCS) USED IN THE DESIGN AND THE FIELD MANAGEMENT OF SUPERPAVE MIXTURES |
| AASHTO T 246 : 2010 | METHOD OF TEST FOR RESISTANCE TO DEFORMATION AND COHESION OF HOT MIX ASPHALT (HMA) BY MEANS OF HVEEM APPARATUS |
| AASHTO T 166 : 2013 | METHOD OF TEST FOR BULK SPECIFIC GRAVITY (G[MB]) OF COMPACTED ASPHALT MIXTURES USING SATURATED SURFACE-DRY SPECIMENS |
| AASHTO R 47 : 2014R(2018) | PRACTICE FOR REDUCING SAMPLES OF HOT MIX ASPHALT (HMA) TO TESTING SIZE |
| AASHTO T 275 : 2007 | METHOD OF TEST FOR BULK SPECIFIC GRAVITY ( G[MB]) OF COMPACTED ASPHALT MIXTURES USING PARAFFIN-COATED SPECIMENS |
| ASME B46.1 : 2009 | SURFACE TEXTURE (SURFACE ROUGHNESS, WAVINESS, AND LAY) |
| AASHTO M 231 : 1995 | SPECIFICATION FOR WEIGHING DEVICES USED IN THE TESTING OF MATERIALS |
| AASHTO T 316 : 2013 | METHOD OF TEST FOR VISCOSITY DETERMINATION OF ASPHALT BINDER USING ROTATIONAL VISCOMETER |
| AASHTO R 35 : 2015 | PRACTICE FOR SUPERPAVE VOLUMETRIC DESIGN FOR ASPHALT MIXTURES |
| AASHTO T 168 : 2003 | METHOD OF TEST FOR SAMPLING BITUMINOUS PAVING MIXTURES |
| AASHTO T 344 : 2012 | METHOD OF TEST FOR EVALUATION OF SUPERPAVE GYRATORY COMPACTOR (SGC) INTERNAL ANGLE OF GYRATION USING SIMULATED LOADING |
| AASHTO T 209 : 2012 | METHOD OF TEST FOR THEORETICAL MAXIMUM SPECIFIC GRAVITY (G[MM]) AND DENSITY OF HOT MIX ASPHALT (HMA) |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.