• There are no items in your cart

ACI 503R : 1993

Current

Current

The latest, up-to-date edition.

USE OF EPOXY COMPOUNDS WITH CONCRETE

Available format(s)

Hardcopy , PDF

Language(s)

English

Published date

01-01-2008

Chapter 1 - Introduction
  1.1 Background
  1.2 General
  1.3 Scope
Chapter 2 - History of epoxies
  2.1 Origin of epoxies
  2.2 Early attempts at using epoxies
  2.3 Development of epoxy applications with concrete
  2.4 Present status of epoxies
Chapter 3 - Chemical and physical characteristics of
            epoxy resins
  3.1 General
  3.2 Adhesion properties
  3.3 Susceptibility to chemical attack
  3.4 Electrical properties
  3.5 Abrasion resistance
  3.6 Resilience
  3.7 Creep
  3.8 Thermal expansion
  3.9 Exothermic reaction during cure
  3.10 Curing and aging stresses
  3.11 Thermosetting properties
Chapter 4 - Uses of epoxy resins
  4.1 General
  4.2 Protective coating
  4.3 Decorative coating
  4.4 Skid-resistant coating
  4.5 Grout
  4.6 Adhesive
  4.7 Binder for epoxy mortar or concrete
  4.8 Underwater application
  4.9 Epoxy-modified concrete
Chapter 5 - Preparing surfaces for epoxy compound
            application
  5.1 General
  5.2 Concrete surface evaluation
  5.3 Removal of concrete for repairs
  5.4 Surface preparation
  5.5 Temperature conditioning
Chapter 6 - Preparing epoxy compound and epoxy
            mixtures for use
  6.1 General
  6.2 Temperature conditioning of material
  6.3 Mixing and proportioning
  6.4 Mixing
  6.5 Cleaning of equipment
  6.6 Caution of solvents and strippers
Chapter 7 - Applying epoxy compounds
  7.1 General considerations
  7.2 Specific applications
  7.3 Underwater applications
Chapter 8 - Hardening
  8.1 Rate of hardening
  8.2 Adjusting the hardening rate
  8.3 Opening the job to service
Chapter 9 - Handling precautions
  9.1 General hazards
  9.2 Safe handling
  9.3 What to do in case of direct contact
  9.4 Use of solvents
  9.5 Education of personnel
Appendix A - Test methods
  A.1 Field test for surface soundness and adhesion
  A.2 Simplified field test for surface soundness
Appendix B - Terminology

Covers Properties, uses, preparations, mixtures, application, and handling requirements of epoxy resin systems when applied to and used with concrete and mortar are presented.

Committee
503
DevelopmentNote
Supersedes ACI 503 (02/2004)
DocumentType
Standard
Pages
28
PublisherName
American Concrete Institute
Status
Current
Supersedes

NACE 6 : 2003 SURFACE PREPARATION OF CONCRETE
ACI 503.6R : 1997 GUIDE FOR THE APPLICATION OF EPOXY AND LATEX ADHESIVES FOR BONDING FRESHLY MIXED AND HARDENED CONCRETES
NACE RP 08 92 : 2001 COATINGS AND LININGS OVER CONCRETE FOR CHEMICAL IMMERSION AND CONTAINMENT SERVICE
CSA S448.1 : 2010 : R2015 REPAIR OF REINFORCED CONCRETE IN BUILDINGS AND PARKING STRUCTURES
CSA S448.1 : 2010 REPAIR OF REINFORCED CONCRETE IN BUILDINGS AND PARKING STRUCTURES
NACE SP 08 92 : 2007 COATINGS AND LININGS OVER CONCRETE FOR CHEMICAL IMMERSION AND CONTAINMENT SERVICE
NACE 02203 : 0 DESIGN, INSTALLATION, AND MAINTENANCE OF PROTECTIVE POLYMER FLOORING SYSTEMS FOR CONCRETE
ACI 210 : 1987(R1993) EROSION OF CONCRETE IN HYDRAULIC STRUCTURES
ACI 302.2R : 2006 GUIDE FOR CONCRETE SLABS THAT RECEIVE MOISTURE-SENSITIVE FLOORING MATERIALS
ACI 221.1R : 1998 REPORT ON ALKALI-AGGREGATE REACTIVITY
ACI 543R : 2012 GUIDE TO DESIGN, MANUFACTURE, AND INSTALLATION OF CONCRETE PILES
ACI 364.3R : 2009 GUIDE FOR CEMENTITIOUS REPAIR MATERIAL DATA SHEET
ACI 440.7R : 2010 GUIDE FOR THE DESIGN AND CONSTRUCTION OF EXTERNALLY BONDED FIBER-REINFORCED POLYMER SYSTEMS FOR STRENGTHENING UNREINFORCED MASONRY STRUCTURES
ACI 503.5R : 1992 GUIDE FOR POLYMER ADHESIVES WITH CONCRETE THE SELECTION OF POLYMER ADHESIVES WITH CONCRETE
ACI 224.1R : 2007 CAUSES, EVALUATION, AND REPAIR OF CRACKS IN CONCRETE STRUCTURES
ACI PRC-357 : 1984 GUIDE FOR THE DESIGN AND CONSTRUCTION OF FIXED OFFSHORE CONCRETE STRUCTURES
ACI 210R : 1993 EROSION OF CONCRETE IN HYDRAULIC STRUCTURES
ASTM C 811 : 1998 : R2003 Standard Practice for Surface Preparation of Concrete for Application of Chemical-Resistant Resin Monolithic Surfacings
ASTM C 811 : 1998 : R2008 Standard Practice for Surface Preparation of Concrete for Application of Chemical-Resistant Resin Monolithic Surfacings (Withdrawn 2012)
ACI 555R : 2001 REMOVAL AND REUSE OF HARDENED CONCRETE
ACI 345R : 2011 GUIDE FOR CONCRETE HIGHWAY BRIDGE DECK CONSTRUCTION
ACI 562 : 2016 CODE REQUIREMENTS FOR ASSESSMENT, REPAIR, AND REHABILITATION OF EXISTING CONCRETE STRUCTURES AND COMMENTARY
ACI 221.1R : 1998(R2008) REPORT ON ALKALI-AGGREGATE REACTIVITY
ASCE/SEI 59 11 : 2011 BLAST PROTECTION OF BUILDINGS
ACI 548.1R : 2009 GUIDE FOR THE USE OF POLYMERS IN CONCRETE
ACI 362R : 1985 STATE-OF-THE-ART REPORT ON PARKING STRUCTURES
NACE 6G197 : 0 DESIGN, INSTALLATION, AND MAINTENANCE OF COATING SYSTEMS FOR CONCRETE USED IN SECONDARY CONTAINMENT
ASTM C 811 : 1998 Standard Practice for Surface Preparation of Concrete for Application of Chemical-Resistant Resin Monolithic Surfacings
CSA A23.1 A23.2 : 2014 CONCRETE MATERIALS AND METHODS OF CONCRETE CONSTRUCTION/TEST METHODS AND STANDARD PRACTICES FOR CONCRETE

ACI 515.1R : 1985 GUIDE TO THE USE OF WATERPROOFING, DAMPPROOFING, PROTECTIVE, AND DECORATIVE BARRIER SYSTEMS FOR CONCRETE
ACI 503.1 : 1992 STANDARD SPECIFICATION FOR BONDING HARDENED CONCRETE, STEEL, WOOD, BRICK, AND OTHER MATERIALS TO HARDENED CONCRETE WITH A MULTI-COMPONENT EPOXY ADHESIVE
ACI 503.3 : 2010 SPECIFICATION FOR PRODUCING A SKID-RESISTANT SURFACE ON CONCRETE BY THE USE OF EPOXY AND AGGREGATE
CFR 29(PTS1900-1910) : 0 LABOR - OCCUPATIONAL SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR
CFR 16(PTS1000-END) : 0 COMMERCIAL PRACTICES - FEDERAL TRADE COMMISSION - CONSUMER PRODUCT SAFETY COMMISSION
ACI 504R : 90(R1997) GUIDE TO SEALING JOINTS IN CONCRETE STRUCTURES
ANSI K68.1 : 1978 GUIDE FOR CLASSIFYING & LABELING EPOXY PRODUCTS ACCORDING TO THEIR HAZARDOUS POTENTIALITIES,
ASTM D 648 : 2016 Standard Test Method for Deflection Temperature of Plastics Under Flexural Load in the Edgewise Position
ACI 224.1R : 2007 CAUSES, EVALUATION, AND REPAIR OF CRACKS IN CONCRETE STRUCTURES
ACI 503.4 : 1992 STANDARD SPECIFICATION FOR REPAIRING CONCRETE WITH EPOXY MORTARS
ASTM D 570 : 1998 : R2018 Standard Test Method for Water Absorption of Plastics
ASTM C 881 : 1999 Standard Specification for Epoxy-Resin-Base Bonding Systems for Concrete
ACI 503.2 : 1992 STANDARD SPECIFICATION FOR BONDING PLASTIC CONCRETE TO HARDENED CONCRETE WITH A MULTI-COMPONENT EPOXY ADHESIVE

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.