ACI 506.2 : 2013(R2018)
Current
The latest, up-to-date edition.
SPECIFICATION FOR SHOTCRETE
Hardcopy , PDF
English
01-02-2019
PART 1—GENERAL 1.1—Scope 1.2—Definitions 1.3—Referenced standards 1.4—Submittals 1.5—Preconstruction testing by Contractor 1.6—Testing during construction 1.7—Delivery, storage, and handling PART 2—PRODUCTS 2.1—Materials 2.2—Packaged shotcrete materials 2.3—Fiber-reinforced shotcrete 2.4—Shotcrete properties 2.5—Proportioning 2.6—Batching, mixing, and delivery PART 3—EXECUTION 3.1—Preparation of surface to receive shotcrete 3.2—Joints 3.3—Alignment control 3.4—Application 3.5—Finish 3.6—Curing 3.7—Protection 3.8—Tolerances 3.9—Repair of shotcrete 3.10—Acceptance of Wor (nonmandatory portion follows) NOTES TO SPECIFIER General notes
Includes the construction requirements for the application of shotcrete.
| Committee |
506
|
| DocumentType |
Standard
|
| ISBN |
978-0-87031-893-1
|
| Pages |
16
|
| PublisherName |
American Concrete Institute
|
| Status |
Current
|
| Supersedes |
| ACI PRC 506.5:2022 | Specifying Underground Shotcrete - Guide |
| ACI PRC-334.3:2024 | Construction of Concrete Shells Using Inflatable Forms—Report |
| ASTM C 231/C231M : 2010 | Standard Test Method for Air Content of Freshly Mixed Concrete by the Pressure Method |
| ASTM C 928/C928M : 2009 | Standard Specification for Packaged, Dry, Rapid-Hardening Cementitious Materials for Concrete Repairs |
| ACI 350 : 2006 | CODE REQUIREMENTS FOR ENVIRONMENTAL ENGINEERING CONCRETE STRUCTURES AND COMMENTARY |
| ASTM C 642 : 2013 | Standard Test Method for Density, Absorption, and Voids in Hardened Concrete |
| ASTM C 1609/C1609M : 2012 | Standard Test Method for Flexural Performance of Fiber-Reinforced Concrete (Using Beam With Third-Point Loading) |
| ASTM C 1602/C1602M : 2012 | Standard Specification for Mixing Water Used in the Production of Hydraulic Cement Concrete |
| ASTM C 171 : 2007 | Standard Specification for Sheet Materials for Curing Concrete |
| ASTM C 457/C457M : 2012 | Standard Test Method for Microscopical Determination of Parameters of the Air-Void System in Hardened Concrete |
| ASTM C 1116/C1116M : 2010 : REV A : R2015 | Standard Specification for Fiber-Reinforced Concrete |
| ASTM C 1141/C1141M : 2008 | Standard Specification for Admixtures for Shotcrete |
| ASTM C 128 : 2012 | Standard Test Method for Density, Relative Density (Specific Gravity), and Absorption of Fine Aggregate |
| ASTM C 1436 : 2008 | Standard Specification for Materials for Shotcrete |
| ASTM A 185/A185M : 2007 | Standard Specification for Steel Welded Wire Reinforcement, Plain, for Concrete (Withdrawn 2013) |
| ASTM C 1315 : 2011 | Standard Specification for Liquid Membrane-Forming Compounds Having Special Properties for Curing and Sealing Concrete |
| ASTM C 309 : 2011 | Standard Specification for Liquid Membrane-Forming Compounds for Curing Concrete |
| ASTM C 78/C78M : 2010 : EDT 1 | Standard Test Method for Flexural Strength of Concrete (Using Simple Beam with Third-Point Loading) |
| ACI 117:2010 | SPECIFICATION FOR TOLERANCES FOR CONCRETE CONSTRUCTION AND MATERIALS AND COMMENTARY |
| ASTM C 1140/C1140M : 2011 | Standard Practice for Preparing and Testing Specimens from Shotcrete Test Panels |
| ASTM D 98 : 2005 | Standard Specification for Calcium Chloride |
| ASTM C 494/C494M : 2013 | Standard Specification for Chemical Admixtures for Concrete |
| ASTM A 706/A706M : 2009 : REV B | Standard Specification for Low-Alloy Steel Deformed and Plain Bars for Concrete Reinforcement |
| ASTM C 1240 : 2012 | Standard Specification for Silica Fume Used in Cementitious Mixtures |
| ASTM C 1583/C1583M : 2013 | Standard Test Method for Tensile Strength of Concrete Surfaces and the Bond Strength or Tensile Strength of Concrete Repair and Overlay Materials by Direct Tension (Pull-off Method) |
| ASTM C 150/C150M : 2012 | Standard Specification for Portland Cement |
| ACI 306R : 2010 | GUIDE TO COLD WEATHER CONCRETING |
| ASTM C 1385/C1385M : 2010 | Standard Practice for Sampling Materials for Shotcrete |
| ASTM C 1059/C1059M : 1999 : R2008 | Standard Specification for Latex Agents for Bonding Fresh To Hardened Concrete |
| ASTM C 42/C42M : 2013 | Standard Test Method for Obtaining and Testing Drilled Cores and Sawed Beams of Concrete |
| ASTM C 685/C685M : 2011 | Standard Specification for Concrete Made by Volumetric Batching and Continuous Mixing |
| ASTM C 33/C33M : 2013 | Standard Specification for Concrete Aggregates |
| ASTM C 989/C989M : 2012 : REV A | Standard Specification for Slag Cement for Use in Concrete and Mortars |
| ASTM A 615/A615M : 2012 | Standard Specification for Deformed and Plain Carbon-Steel Bars for Concrete Reinforcement |
| ASTM C 1604/C1604M : 2005 : R2012 | Standard Test Method for Obtaining and Testing Drilled Cores of Shotcrete |
| ASTM C 1077 : 2013 : REV B | Standard Practice for Agencies Testing Concrete and Concrete Aggregates for Use in Construction and Criteria for Testing Agency Evaluation |
| ASTM C 127 : 2012 | Standard Test Method for Density, Relative Density (Specific Gravity), and Absorption of Coarse Aggregate |
| ASTM C 1550 : 2012 : REV A | Standard Test Method for Flexural Toughness of Fiber Reinforced Concrete (Using Centrally Loaded Round Panel) |
| ASTM C 618 : 2012 : REV A | Standard Specification for Coal Fly Ash and Raw or Calcined Natural Pozzolan for Use in Concrete |
| ASTM C 1064/C1064M : 2012 | Standard Test Method for Temperature of Freshly Mixed Hydraulic-Cement Concrete |
| ASTM C 1480/C1480M : 2007 : R2012 | Standard Specification for Packaged, Pre-Blended, Dry, Combined Materials for Use in Wet or Dry Shotcrete Application (Withdrawn 2021) |
Important note : Users cannot be edited or removed once added to your Multi user PDF.Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.
Logging out.