ANSI C78.21 : 2011(R2016)
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
American National Standard for Electric Lamps—PAR and R Shapes
Hardcopy , PDF
03-01-2023
English
22-12-2022
Foreword
Part I - General Information
1 Scope
2 Normative References
3 Definitions and abbreviations
4 Lamp designations
5 Bulb designations
6 Bulb finish
7 Beam photometry and classification
8 Lamp drawings
9 Electrical characteristics
10 Requirements
11 Information on luminaire design
Part II - Lamp Classes
Part III - Lamp Space Drawings
Part IV - Product Drawings
Annexes
Annex A - Informative References
This standard provides physical and electrical characteristics of the group of incandescent lamps that have PAR and R bulb shapes. Lamps with clear, frosted, and lens end bulbs, with clear and prescription lenses, and with various reflector coatings are covered. Lamps covered in this standard may contain either of two basic types of light sources: an incandescent filament or a tungsten halogen inner bulb. Sunlamps and heat lamps of the R type are included. Lamps with discharge arc tubes are not included. This revision adds the R16 lamp to the C78.21 Standard, thus allowing the lighting industry to manufacture these lamps based upon a common set of specifications.
DocumentType |
Standard
|
Pages |
0
|
PublisherName |
National Electrical Manufacturers Association
|
Status |
Superseded
|
SupersededBy | |
Supersedes |
ANSI C78.60432.2:2007 | American National Standard for Electric Lamps—Safety Specifications, Part 2: Tungsten Halogen (TH) Lamps for Domestic and Similar General Lighting Purposes |
CSA C862 : 2012 | PERFORMANCE OF INCANDESCENT REFLECTOR LAMPS |
CSA C862 : 2012 : INC : UPD 1 : 2014 | PERFORMANCE OF INCANDESCENT REFLECTOR LAMPS |
C78.379:2006(R2015) | American National Standard for Electric Lamps—Classification of the Beam Patterns of Reflector Lamps |
ANSI C78.20:2003(R2007) | American National Standard for Electric Lamps—A, G, PS, and Similar Shapes with E26 Medium Screw Bases |
CAN/CSA-C862-12 (R2017) | Performance of incandescent reflector lamps |
ANSI C78.60432:1:2007 | American National Standard for Electric Lamps—Incandescent Lamps—Safety Specifications, Part 1: Tungsten Filament Lamps for Domestic and Similar General Lighting Purposes |
NEMA SSL 4:2012 | Retrofit Lamps—Minimum Performance Requirements |
CAN/CSA-C871-13 (R2018) | Performance of LED replacement lamps |
ANSI C81.62 : 2017 | ELECTRIC LAMPHOLDERS |
IES LM 20 : 2013 | IES APPROVED METHOD FOR PHOTOMETRY OF REFLECTOR TYPE LAMPS |
ANSI C78.23:1995(R2003) | American National Standard for Incandescent Lamps—Miscellaneous Types |
ANSI C78.60432:1:2007 | American National Standard for Electric Lamps—Incandescent Lamps—Safety Specifications, Part 1: Tungsten Filament Lamps for Domestic and Similar General Lighting Purposes |
ANSI C81.61 : 2017 | ELECTRIC LAMP BASES - SPECIFICATIONS FOR BASES (CAPS) FOR ELECTRIC LAMPS |
NEMA WD 6 : 2016 | WIRING DEVICES - DIMENSIONAL SPECIFICATIONS |
ANSI C78.60432.2:2007 | American National Standard for Electric Lamps—Safety Specifications, Part 2: Tungsten Halogen (TH) Lamps for Domestic and Similar General Lighting Purposes |
C78.379:2006(R2015) | American National Standard for Electric Lamps—Classification of the Beam Patterns of Reflector Lamps |
ANSI C78.20:2003(R2007) | American National Standard for Electric Lamps—A, G, PS, and Similar Shapes with E26 Medium Screw Bases |
ANSI C78.30 : 1997(S2018) | American National Standard for Electric Lamps—Procedure for Use in Preparation of Lamp Space Drawings |
IES LM 45 : 2015 | METHOD FOR THE ELECTRICAL AND PHOTOMETRIC MEASUREMENT OF GENERAL SERVICE INCANDESCENT FILAMENT LAMPS |
ANSI C79.1:2002 | American National Standard for Nomenclature for Glass Bulbs Intended for Use with Electric Lamps |
UL 496:14ED 2017-09-05 | Lampholders |
ANSI C78.22:1995 (R2003) | American National Standard for Incandescent Lamps—A, G, PS and Similar Shapes with E39 Mogul Screw Bases |
ANSI C81.63 : 2007(R2014) | GAUGES FOR ELECTRIC LAMP BASES AND LAMPHOLDERS |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.