ANSI C81.61 : 2017
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
ELECTRIC LAMP BASES - SPECIFICATIONS FOR BASES (CAPS) FOR ELECTRIC LAMPS
Hardcopy , PDF
English
06-12-2012
03-07-2019
Foreword
PART I - General Information and Requirements
1 Scope
2 Normative References
3 General Information
PART II - ANSI Standard Sheets for
Bases (Caps) for Electric Lamps
PART III - United States Deviations to IEC
Harmonized Electric Lamp Base
Standard Sheets
PART IV - Annexes
Annex A - Contrast of Projection Methods
on Engineering Drawings
Annex B - Related Standards
Describes the specifications for bases (caps) used on electric lamps.
| DevelopmentNote |
Supersedes ANSI C81.50 and ANSI C81.10. (07/2004)
|
| DocumentType |
Standard
|
| Pages |
105
|
| PublisherName |
National Electrical Manufacturers Association
|
| Status |
Superseded
|
| SupersededBy |
| SAE ARP798B | Design Criteria for White Incandescent Lighted Aerospace Instruments |
| A-A-52463 Revision B:1996 | Lamp Bulbs, Incandescent, Miniature, Single and Double Contact, Bayonet Candelabra Base |
| CSA E432.1 : 1998: R 2007 | SAFETY SPECIFICATIONS FOR INCANDESCENT LAMPS - TUNGSTEN FILAMENT LAMPS FOR DOMESTIC AND SIMILAR GENERAL LIGHTING PURPOSES |
| UL 1993:5ED 2017-01-27 | Self-Ballasted Lamps and Lamp Adapters |
| MIL L 6363 : G | LAMP, INCANDESCENT, AVIATION SERVICE GENERAL SPECIFICATION FOR |
| UL 1786:4ED 2014-12-17 | Direct Plug-In Nightlights |
| UL 496:14ED 2017-09-05 | Lampholders |
| SAE J567_201502 | Light Source Retention System |
| FED-STD-H28 Revision A:1994 | Screw-Thread Standards for Federal Services |
| MIL-DTL-6363 Revision H:1997 | Lamps, Incandescent, Aircraft Service, General Specification for |
| ANSI C78.1434:2001 | American National Standard for Condensing Dichroic Coated Integral Reflector Side-Pin Tungsten Halogen (TH) Projection Lamps with GX7.9 Bases |
| ANSI C78.43 : 2013 | ELECTRIC LAMPS - SINGLE-ENDED METAL HALIDE LAMPS |
| ANSI C78.79 : 2014 | ELECTRIC LAMPS - NOMENCLATURE FOR ENVELOPE SHAPES INTENDED FOR USE WITH ELECTRIC LAMPS |
| ANSI C78.1431:1997(R2016) | American National Standard for Electric Lamps—Slide Projector Lamps, Condensing, Dichroic, Two-inch (51 mm), Integral Reflector, Rim Reference Tungsten-Halogen Lamps with GY 5.3 Bases |
| ANSI C78.1432:1997 | American National Standard for Tungsten Halogen (TH) Lamps with GZ9.5 Two-Pin, Prefocus Bases and 36.5 mm Nominal Light Center Length |
| ANSI C78.23:1995(R2003) | American National Standard for Incandescent Lamps—Miscellaneous Types |
| ANSI C78.1403:1997 (S2018) | American National Standard for Electric Lamps—Tungsten Halogen (TH) Lamps with G6.35, GX6.35 and GY6.35 Bases |
| ANSI C78.1500:2001 | American National Standard for Tungsten Halogen (TH) Lamps with a Light Center Length (LCL) of 89 mm (3½ in.) |
| ANSI C78.1406:2004 | American National Standard for Electric Lamps—P28 Single-Contact Medium Prefocus-Based Projection Lamps for Base-Down Operation—Dimensions |
| ANSI C78.1386 : 1998 | ELECTRIC LAMPS - 100-WATT, M91 DOUBLE-ENDED METAL-HALIDE LAMPS |
| C78.1407-2004 (R2015) | American National Standard for Electric Lamps—Condenser-Reflector, Four-Pin Prefocus-Base Projection Lamps—Dimensions |
| ANSI C136.29 : 2011(R2018) | American National Standard for Roadway and Area Lighting Equipment—Metal Halide Lamps—Guide for Selection |
| ANSI C78.1387 : 2001 | ELECTRIC LAMPS - 250-WATT, M80 DOUBLE-ENDED METAL-HALIDE LAMPS |
| ANSI C78.24:2001 | American National Standard for Electric Lamps—Two-inch (51 mm) Integral-Reflector Lamps with Front Covers and GU5.3 or GX5.3 Bases |
| ANSI C78.390:2006(R2015) | American National Standard for Electric Lamps—Miniature and Sealed-Beam Incandescent Lamps—Method of Designation |
| ANSI C78.20:2003(R2007) | American National Standard for Electric Lamps—A, G, PS, and Similar Shapes with E26 Medium Screw Bases |
| ANSI C78.1421-2002 | American National Standard for Dimensions and Centering Systems for Projection Lamps—35 mm Integral Reflector, Rim Reference Lamps with GZ4 Bases |
| ANSI C78.1420 : 2001 | MICROFILM PROJECTION LAMPS - TWO-INCH (51 MM) DICHROIC COATED INTEGRAL REFLECTOR, RIM REFERENCE, TUNGSTEN HALOGEN LAMPS WITH GX5.3 BASES |
| ANSI C78.1505:2001 | American National Standard for Tungsten Halogen (TH) Lamps with G38 Bases and 127 mm Light Center Length (LCL) |
| ANSI C78.1417-1997 | American National Standard for 1.65 in. (42 mm) Integral Reflector, Rim Reference Projection Lamps with GX5.3 or GY5.3 Bases—Dimensions and Centering Systems |
| ANSI C78.1385 : 1998 | ELECTRIC LAMP0 - 150-WATT, M81 DOUBLE-ENDED METAL-HALIDE LAMPS |
| ANSI C81.63 : 2007(R2014) | GAUGES FOR ELECTRIC LAMP BASES AND LAMPHOLDERS |
| ANSI C81.64:2005 (R2014) | American National Standard—Guidelines and General Information for Electrical Lamp Bases, Lampholders and Gauges |
| ANSI C78.370 : 1997(R2003) | American National Standard for Method of Designation for Electric Lamps—Photographic, Stage and Studio |
| ANSI C78.60432:1:2007 | American National Standard for Electric Lamps—Incandescent Lamps—Safety Specifications, Part 1: Tungsten Filament Lamps for Domestic and Similar General Lighting Purposes |
| NEMA LL 9:2011 | Dimming of T8 Fluorescent Lighting Systems |
| NEMA SSL 4:2012 | Retrofit Lamps—Minimum Performance Requirements |
| ANSI C78.260:2002 | American National Standard for Tubular Tungsten Halogen (TH) Lamps—Physical Characteristics |
| ANSI C78.1381:1998 | American National Standard for Electric Lamps—70 W, M85 Double-Ended Metal Halide Lamps |
| ANSI C78.21 : 2011(R2016) | American National Standard for Electric Lamps—PAR and R Shapes |
| ANSI C78.1430:1997(R2009) | American National Standard for Electric Lamps—Slide Projector Lamps, Condensing, Dichroic, 1.65-in.(42 mm), Integral Reflector, Rim Reference Tungsten-Halogen Lamps with GX5.3 Bases |
| ANSI C78.22:1995 (R2003) | American National Standard for Incandescent Lamps—A, G, PS and Similar Shapes with E39 Mogul Screw Bases |
| ANSI C78.60432.3:2007 | American National Standard for Electric Lamps—Incandescent Lamps—Safety Specifications, Part 3: Tungsten Halogen (TH) Lamps (Non-Vehicle) |
| ANSI C136.16 : 1997 | Roadway and Area Lighting Equipment— Enclosed Post Top-Mounted Luminaires |
| ANSI C78.1433:2001 | American National Standard for 2 in. (51 mm) Dichroic Coated Integral Reflector, Rim Reference Tungsten Halogen (TH) Large-Screen Projection Lamps with GX5.3 Bases |
| ANSI C78.1504:2001 | American National Standard for Tungsten Halogen (TH) Lamps with P28 Bases and 55.5 mm Light Center Length (LCL) |
| ANSI C78.1408:2004(R2015) | American National Standard for Electric Lamps—CBA Projection Lamp |
| ANSI C78.1460 : 2004(R2015) | American National Standard for Electric Lamps—Single-Ended Tungsten-Halogen Lamps GZ9.5 Base, T6 Bulb, 36.5mm LCL, 76.2mm MOL with Proximity Reflector |
| ANSI C78.1503:2001 | American National Standard for Tungsten Halogen (TH) Lamps with G9.5 Bases and 60.5 mm Light Center Length (LCL) |
| ANSI C78.1435:2002 | American National Standard for Projection Lamps—Tungsten Halogen Lamps with G5.3 Bases |
| ANSI C78.1413:2001 | American National Standard for Dimensions and Centering Systems for Projection Lamps—51 mm (2 in.) Integral Reflector, Rim Reference Lamps with GX5.3, GY5.3 and GU5.3 Bases |
| ISA 12.16.01 : 2002 | ELECTRICAL APPARATUS FOR USE IN CLASS 1, ZONE 1 HAZARDOUS (CLASSIFIED) LOCATIONS: TYPE OF PROTECTION - INCREASED SAFETY |
| IES LM 74 : 2005 | FILE FORMAT FOR THE ELECTRONIC TRANSFER OF LUMINARIES COMPONENT DATA |
| ISA 60079-7 : 2008 | EXPLOSIVE ATMOSPHERES - PART 7: EQUIPMENT PROTECTION BY INCREASED SAFETY "E" |
Access your standards online with a subscription
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.