ANSI C81.63 : 2007(R2014)
Superseded
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
GAUGES FOR ELECTRIC LAMP BASES AND LAMPHOLDERS
Superseded date
09-09-2019
Superseded by
Published date
06-12-2012
Sorry this product is not available in your region.
Foreword
Part I - General Information and Requirements
1 Scope
2 Normative references
3 General information
Part II - ANSI Standard Sheets for Gauges for Bases
(Caps) and Lampholders for Electric Lamps
Part III - United States Deviations to IEC Harmonized
Gauge Standard Sheets
Annexes
Annex A - Contrast of Projection Methods on
Engineering Drawings
Annex B - Related Standards
Describes the specifications for gauges for bases (caps) and lampholders for electric lamps.
| DevelopmentNote |
Supersedes ANSI C81.10, ANSI C81.20 and ANSI C81.50. (07/2004)
|
| DocumentType |
Standard
|
| PublisherName |
National Electrical Manufacturers Association
|
| Status |
Superseded
|
| SupersededBy |
| CAN/CSA-E432-1-98 (R2017) | Safety Specifications for Incandescent Lamps - Part 1: Tungsten Filament Lamps for Domestic and Similar General Lighting Purposes (Adopted IEC 432-1:1993, first edition, including Amendment 1:1995 and Amendment 2:1997, with Canadian deviations) | Prescriptions de sécurité pour lampes à incandescence - Partie 1: Lampes à filament de tungstène pour usage domestique et éclairage général similaire (norme CEI 432-1:1993 adoptée, première édition, avec l\'amendement 1:1995 et l\'amendement 2:1997, avec exigences propres au Canada) |
| CSA E432.1 : 1998: R 2007 | SAFETY SPECIFICATIONS FOR INCANDESCENT LAMPS - TUNGSTEN FILAMENT LAMPS FOR DOMESTIC AND SIMILAR GENERAL LIGHTING PURPOSES |
| CSA E432.1 : 1998 : INC : UPD 1 : 1998 : R2012 | SAFETY SPECIFICATIONS FOR INCANDESCENT LAMPS - TUNGSTEN FILAMENT LAMPS FOR DOMESTIC AND SIMILAR GENERAL LIGHTING PURPOSES |
| UL 1993:5ED 2017-01-27 | Self-Ballasted Lamps and Lamp Adapters |
| CSA C22.2 No. 37 : 2017 | DECORATIVE LIGHTING PRODUCTS |
| UL 1786:4ED 2014-12-17 | Direct Plug-In Nightlights |
| UL 496:14ED 2017-09-05 | Lampholders |
| SAE J567_201502 | Light Source Retention System<br> |
| FED-STD-H28 Revision A:1994 | Screw-Thread Standards for Federal Services |
| ANSI C78.43 : 2013 | ELECTRIC LAMPS - SINGLE-ENDED METAL HALIDE LAMPS |
| ANSI C78.1432:1997 | American National Standard for Tungsten Halogen (TH) Lamps with GZ9.5 Two-Pin, Prefocus Bases and 36.5 mm Nominal Light Center Length |
| C22.2 NO. 43-17 | Lampholders (Binational standard with UL 496) |
| ANSI C78.23:1995(R2003) | American National Standard for Incandescent Lamps—Miscellaneous Types |
| ANSI C78.1403:1997 (S2018) | American National Standard for Electric Lamps—Tungsten Halogen (TH) Lamps with G6.35, GX6.35 and GY6.35 Bases |
| ANSI C78.1500:2001 | American National Standard for Tungsten Halogen (TH) Lamps with a Light Center Length (LCL) of 89 mm (3½ in.) |
| ANSI C78.1386 : 1998 | ELECTRIC LAMPS - 100-WATT, M91 DOUBLE-ENDED METAL-HALIDE LAMPS |
| ANSI C78.1387 : 2001 | ELECTRIC LAMPS - 250-WATT, M80 DOUBLE-ENDED METAL-HALIDE LAMPS |
| ANSI C78.24:2001 | American National Standard for Electric Lamps—Two-inch (51 mm) Integral-Reflector Lamps with Front Covers and GU5.3 or GX5.3 Bases |
| ANSI C78.20:2003(R2007) | American National Standard for Electric Lamps—A, G, PS, and Similar Shapes with E26 Medium Screw Bases |
| ANSI C78.1421-2002 | American National Standard for Dimensions and Centering Systems for Projection Lamps—35 mm Integral Reflector, Rim Reference Lamps with GZ4 Bases |
| ANSI C78.1505:2001 | American National Standard for Tungsten Halogen (TH) Lamps with G38 Bases and 127 mm Light Center Length (LCL) |
| ANSI C78.1385 : 1998 | ELECTRIC LAMP0 - 150-WATT, M81 DOUBLE-ENDED METAL-HALIDE LAMPS |
| C22.2 NO. 1993-17 | Self-ballasted lamps and lamp adapters (Trinational standard with NMX-J-578/1-ANCE and UL 1993) |
| ANSI C81.64:2005 (R2014) | American National Standard—Guidelines and General Information for Electrical Lamp Bases, Lampholders and Gauges |
| ANSI C78.60432:1:2007 | American National Standard for Electric Lamps—Incandescent Lamps—Safety Specifications, Part 1: Tungsten Filament Lamps for Domestic and Similar General Lighting Purposes |
| NEMA LL 9:2011 | Dimming of T8 Fluorescent Lighting Systems |
| ANSI C78.1381:1998 | American National Standard for Electric Lamps—70 W, M85 Double-Ended Metal Halide Lamps |
| ANSI C78.21 : 2011(R2016) | American National Standard for Electric Lamps—PAR and R Shapes |
| ANSI C78.22:1995 (R2003) | American National Standard for Incandescent Lamps—A, G, PS and Similar Shapes with E39 Mogul Screw Bases |
| ANSI C78.60432.3:2007 | American National Standard for Electric Lamps—Incandescent Lamps—Safety Specifications, Part 3: Tungsten Halogen (TH) Lamps (Non-Vehicle) |
| ANSI C78.1504:2001 | American National Standard for Tungsten Halogen (TH) Lamps with P28 Bases and 55.5 mm Light Center Length (LCL) |
| ANSI C78.1503:2001 | American National Standard for Tungsten Halogen (TH) Lamps with G9.5 Bases and 60.5 mm Light Center Length (LCL) |
| CSA C22.2 No. 62560 : 2016 | SELF-BALLASTED LED-LAMPS FOR GENERAL LIGHTING SERVICES BY VOLTAGE > 50 V - SAFETY SPECIFICATIONS |
| ANSI C78.1413:2001 | American National Standard for Dimensions and Centering Systems for Projection Lamps—51 mm (2 in.) Integral Reflector, Rim Reference Lamps with GX5.3, GY5.3 and GU5.3 Bases |
| ANSI C81.62 : 2017 | ELECTRIC LAMPHOLDERS |
| IEC 60061-3:2005 CSV | Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 3: Gauges |
| ANSI C81.64:2005 (R2014) | American National Standard—Guidelines and General Information for Electrical Lamp Bases, Lampholders and Gauges |
| IEC 60061-2:2005 CSV | Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 2: Lampholders |
| ANSI C81.61 : 2017 | ELECTRIC LAMP BASES - SPECIFICATIONS FOR BASES (CAPS) FOR ELECTRIC LAMPS |
| IEC 60061-1:2005 CSV | Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 1: Lamp caps |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.