ANSI INCITS 328 : 2000 : R2015
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
INFORMATION TECHNOLOGY - 19 MM DD-2 HELICAL SCAN DIGITAL COMPUTER TAPE CASSETTE FOR INFORMATION INTERCHANGE
Hardcopy , PDF
07-02-2016
English
01-01-2015
Foreword
1 Introduction
1.1 Scope, purpose and application
1.2 Purpose
1.3 Application
2 References
2.1 American National Standards
2.2 Other standards
3 Definitions
4 Acronyms
5 Environment and safety
5.1 Testing environment
5.2 Operating environment
5.3 Storage environment
5.4 Safety
5.5 Test methods
6 Tape characteristics
6.1 Materials
6.2 Tape width and tolerance
6.3 Width fluctuation
6.4 Reference edge straightness
6.5 Total tape thickness
6.6 Discontinuity
6.7 Longitudinal curvature
6.8 Leaders, trailers and splices
6.9 Layer-to-layer adhesion
6.10 Coating adhesion
6.11 Offset yield strength
6.12 Tensile yield force
6.13 Residual elongation
6.14 Tape cupping
6.15 Transmissivity
6.16 Inhibitor tape
7 Magnetic and electrical properties
7.1 Magnetic coating
7.2 Average signal amplitude
7.3 Signal dropout
7.4 Particle orientation
7.5 Coercivity
7.6 Electrical resistance
8 Cassette characteristics
8.1 General description
8.2 Cassette dimensions
8.3 Identification and length of cassettes
8.4 Face of magnetic coating
8.5 Datum planes
8.6 Windows and labels
8.7 Identification holes
8.8 Reels
9 Track geometry
9.1 Dimensions and tolerances
9.2 Head gap azimuth
9.3 Helical track curvature
9.4 Longitudinal tracks
10 Overview of format constructs
10.1 Partition
10.2 System zone
10.3 End-of-recording considerations
10.4 Addressing scheme
10.5 Formatting a cassette
10.6 Volume and partition initialization
10.7 Read verify and rewrite
10.8 Append write only
11 Recorded format
12 Longitudinal track format
12.1 Recording method
12.2 Longitudinal sync word
12.3 Servo track (SVT)
12.4 Physical address track segment (PATS) and longitudinal
address track segment (LATS) formats
12.5 Physical address track segment (PATS) definitions
12.6 Logical address track
12.7 LATS data field definitions
13 Helical format
13.1 Helical track content
13.2 Helical channel
13.3 Serialization
14 Logical format data fields
14.1 Format identifier (FID)
14.2 Zone type (ZNTY)
14.3 Partition identifier (PTID)
14.4 System zone identifier (SZID)
14.5 File section number (FSN)
14.6 First data block or byte number (FDBN)
14.7 Data block or byte (DBB)
14.8 Data block checksum enable (DCSE)
14.9 End-of-media warning flag (EMWF)
14.10 Data block size (DBS)
14.11 Total byte count (TBC)
14.12 Physical-block sequence tag (PBST)
14.13 Rewrite enable (RWEN)
14.14 Remaining rewrite count (RRWC)
14.15 Cumulative data block or byte number (CDBN)
14.16 Absolute double-frame number (ADFN)
14.17 Helical track type (HTTY)
14.18 Helical track number (HTKN)
14.19 Sub block CRC inverted (SABCI)
14.20 Partition layout option (PTLO)
14.21 System zone size (SZSZ)
14.22 System zone spacing (SZSP)
14.23 Partition group A size (PGAS)
14.24 Partition group A count (PGAC)
14.25 Partition group B size (PGBS)
14.26 Partition group B count (PGBC)
14.27 Vendor identifier (VNID)
14.28 Last double-frame number (LDFN)
14.29 Last valid system zone (LVSZ)
14.30 Last valid partition (LVPT)
14.31 Volume identifier (VLID)
15 Helical track and double-frame types
15.1 Helical track types
15.2 Types of double-frame
16 Logical format
16.1 Logical layer overview
16.2 Logical entities
16.3 Volume format information (VFI)
16.4 Volume initialization requirements
16.5 Pre-formatted tape
Annexes
A Summary of formatted helical track array
B Summary of helical and longitudinal recording format
C Summary of PATS and LATS contents
D Helical track content - data physical-block double-frame
E Method of measuring recording tape abrasivity
Ascertains the requirements for DD-2 digital data storage cassettes to be used for information interchange between information processing systems.
Committee |
X3B5
|
DocumentType |
Standard
|
Pages |
126
|
ProductNote |
Reconfirmed 2015
|
PublisherName |
Information Technology Industry Council
|
Status |
Superseded
|
SupersededBy | |
Supersedes |
IEC 61179:1993 | Helical-scan digital composite video cassette recording system using 19 mm magnetic tape, format D2 (NTSC, PAL, PAL-M) |
ISO/R 527:1966 | Plastics Determination of tensile properties |
IEC 60735:1991 | Measuring methods for video tape properties |
ANSI S4.40 : 1992 | DIGITAL AUDIO ENGINEERING - SERIAL TRANSMISSION FORMAT FOR TWO-CHANNEL LINEARLY REPRESENTED DIGITAL AUDIO DATA, RECOMMENDED PRACTICE (AES-3) FOR |
ANSI INCITS 27 : 1987 | INFORMATION SYSTEMS - FILE STRUCTURE AND LABELING OF MAGNETIC TAPES FOR INFORMATION INTERCHANGE |
IEEE 268-1992 | American National Standard for Metric Practice |
ISO 1302:2002 | Geometrical Product Specifications (GPS) Indication of surface texture in technical product documentation |
ISO 370:1975 | Toleranced dimensions Conversion from inches into millimetres and vice versa |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.