• API 14F REDLINE : 2008

    Current The latest, up-to-date edition.

    DESIGN, INSTALLATION, AND MAINTENANCE OF ELECTRICAL SYSTEMS FOR FIXED AND FLOATING OFFSHORE PETROLEUM FACILITIES FOR UNCLASSIFIED AND CLASS 1, DIVISION 1 AND DIVISION 2 LOCATIONS

    Available format(s):  Hardcopy, PDF

    Language(s):  English

    Published date:  01-01-2008

    Publisher:  American Petroleum Institute

    Add To Cart

    Table of Contents - (Show below) - (Hide below)

    1 General
    2 References
    3 Acronyms and Abbreviated Definitions
    4 Electrical Equipment for Hazardous
       (Classified) Locations
    5 Electric Power Generating Stations
    6 Electrical Distribution Systems
    7 Electric Motors
    8 Transformers
    9 Lighting
    10 Battery-powered DC Supply Systems
    11 Special Systems
    12 Special Considerations
    13 System Checkout
    14 Maintenance
    15 Safety
    Annex A (informative) - Inspection Intervals
    Annex B (informative) - ABS Rules For Building
            and Classing Steel Vessels - 1998, PART 4
    Annex C (informative) - USCG Requirements, 46 CFR,
            Subchapter J, 111.95
    Annex D (informative) - USCG Requirements, 46 CFR,
            Subchapter J, 111.97
    Annex E (informative) - USCG Requirements, 46 CFR,
            Subchapter J, Subpart 111.105

    Abstract - (Show below) - (Hide below)

    Describes minimum requirements and guidelines for the design, installation, and maintenance of electrical systems on fixed and floating petroleum facilities located offshore.

    General Product Information - (Show below) - (Hide below)

    Document Type Redline
    Publisher American Petroleum Institute
    Status Current

    Standards Referencing This Book - (Show below) - (Hide below)

    ANSI C37.12 : 2008 SPECIFICATION GUIDE FOR AC HIGH-VOLTAGE CIRCUIT BREAKERS BASED ON A SYMMETRICAL CURRENT BASIS
    NFPA 91 : 2015 EXHAUST SYSTEMS FOR AIR CONVEYING OF VAPORS, GASES, MISTS, AND PARTICULATE SOLIDS
    CFR 33(PTS125-199) : JUL 2017 NAVIGATION AND NAVIGABLE WATERS
    ISA 60079-7 : 2008 EXPLOSIVE ATMOSPHERES - PART 7: EQUIPMENT PROTECTION BY INCREASED SAFETY "E"
    IEEE C37.14:2015 DC (3200 V AND BELOW) POWER CIRCUIT BREAKERS USED IN ENCLOSURES
    IEEE C37.20.1:2015 METAL-ENCLOSED LOW-VOLTAGE (1000 VAC AND BELOW, 3200 VDC AND BELOW) POWER CIRCUIT BREAKER SWITCHGEAR
    IEEE 1202 : 2006 FLAME-PROPAGATION TESTING OF WIRE AND CABLE
    CFR 46(PTS90-139) : OCT 2017 SHIPPING - COAST GUARD, DEPARTMENT OF TRANSPORTATION
    API 500 : 2012 RECOMMENDED PRACTICE FOR CLASSIFICATION OF LOCATIONS FOR ELECTRICAL INSTALLATIONS AT PETROLEUM FACILITIES CLASSIFIED AS CLASS 1, DIVISION 1 AND DIVISION 2
    ISA 60079-5 : 1998 EXPLOSIVE ATMOSPHERES - PART 5: EQUIPMENT PROTECTION BY POWDER FILLING 'Q'
    ISA 12.01.01 : 2009 DEFINITIONS AND INFORMATION PERTAINING TO ELECTRICAL EQUIPMENT IN HAZARDOUS (CLASSIFIED) LOCATIONS
    UL 514A:11ED 2013-02 Metallic Outlet Boxes
    API 14FZ : 2013 RECOMMENDED PRACTICE FOR DESIGN, INSTALLATION, AND MAINTENANCE OF ELECTRICAL SYSTEMS FOR FIXED AND FLOATING OFFSHORE PETROLEUM FACILITIES FOR UNCLASSIFIED AND CLASS 1, ZONE 0, ZONE 1, AND ZONE 2 LOCATIONS
    UL 50 : 2015 ENCLOSURES FOR ELECTRICAL EQUIPMENT, NON-ENVIRONMENTAL CONSIDERATIONS
    UL 62 : 2014 FLEXIBLE CORDS AND CABLES
    C22.1-15 Canadian Electrical Code, Part I (23rd Edition), Safety Standard for Electrical Installations
    UL 1104 : 2 MARINE NAVIGATION LIGHTS
    UL 1072 : 4 MEDIUM-VOLTAGE POWER CABLES
    API RP 14C : 2017 ANALYSIS, DESIGN, INSTALLATION, AND TESTING OF SAFETY SYSTEMS FOR OFFSHORE PRODUCTION FACILITIES
    ISA 12.12.01 : 2007 NONINCENDIVE ELECTRICAL EQUIPMENT FOR USE IN CLASS 1 AND 2, DIVISION 2 AND CLASS 3, DIVISIONS 1 AND 2 HAZARDOUS (CLASSIFIED) LOCATIONS
    ISA TR12.24.01 : 1998 RECOMMENDED PRACTICE FOR CLASSIFICATION OF LOCATIONS FOR ELECTRICAL INSTALLATIONS CLASSIFIED AS CLASS 1, ZONE 0, ZONE 1, OR ZONE 2
    UL 1558 : 5 METAL-ENCLOSED LOW-VOLTAGE POWER CIRCUIT BREAKER SWITCHGEAR
    UL 844 : 2013 LUMINAIRES FOR USE IN HAZARDOUS (CLASSIFIED) LOCATIONS
    ISA RP92.0.02-2 : 1998 INSTALLATION, OPERATION, AND MAINTENANCE OF TOXIC GAS-DETECTION INSTRUMENTS: HYDROGEN SULFIDE
    API 546 : 2008 BRUSHLESS SYNCHRONOUS MACHINES - 500 KVA AND LARGER
    IEEE 841 : 2009 PETROLEUM AND CHEMICAL INDUSTRY - PREMIUM-EFFICIENCY, SEVERE-DUTY, TOTALLY ENCLOSED FAN-COOLED (TEFC) SQUIRREL CAGE INDUCTION MOTORS - UP TO AND INCLUDING 370 KW (500 HP)
    UL 674 : 5 ELECTRIC MOTORS AND GENERATORS FOR USE IN HAZARDOUS (CLASSIFIED) LOCATIONS
    NFPA 325 : 1994 FIRE HAZARD PROPERTIES OF FLAMMABLE LIQUIDS, GASES, AND VOLATILE SOLIDS
    NFPA 101 : 2018 LIFE SAFETY CODE
    UL 913 : 8 INTRINSICALLY SAFE APPARATUS AND ASSOCIATED APPARATUS FOR USE IN CLASS 1, 2, 3, DIVISION 1, HAZARDOUS (CLASSIFIED) LOCATIONS
    IES HB 9 : 2000 ERRATA 2006 IESNA LIGHTING HANDBOOK
    UL 2225 : 4 CABLES AND CABLE-FITTINGS FOR USE IN HAZARDOUS (CLASSIFIED) LOCATIONS
    UL 347 : 6 MEDIUM-VOLTAGE AC CONTACTORS, CONTROLLERS, AND CONTROL CENTRES
    UL 1042 : 5 ELECTRIC BASEBOARD HEATING EQUIPMENT
    ISA 92.0.01-1 : 1998 PERFORMANCE REQUIREMENTS FOR TOXIC GAS-DETECTION INSTRUMENTS: HYDROGEN SULFIDE
    IEEE C37.20.2 : 2015 METAL-CLAD SWITCHGEAR
    UL 1572 : 4ED REV NOV 99 HIGH INTENSITY DISCHARGE LIGHTING FIXTURES
    NFPA 70B : 2016 RECOMMENDED PRACTICE FOR ELECTRICAL EQUIPMENT MAINTENANCE
    IEEE Y32.9 : 1972 AMERICAN NATIONAL STANDARD GRAPHIC SYMBOLS FOR ELECTRICAL WIRING AND LAYOUT DIAGRAMS USED IN ARCHITECTURE AND BUILDING CONSTRUCTION
    UL 83 : 2017 THERMOPLASTIC-INSULATED WIRES AND CABLES
    NFPA 90A : 2018 INSTALLATION OF AIR-CONDITIONING AND VENTILATING SYSTEMS
    UL 1008 : 8 TRANSFER SWITCH EQUIPMENT
    NFPA 69 : 2014 EXPLOSION PREVENTION SYSTEMS
    API 2003 : 2015 PROTECTION AGAINST IGNITIONS ARISING OUT OF STATIC, LIGHTNING, AND STRAY CURRENTS
    ISA 60079-1 : 2005 EXPLOSIVE ATMOSPHERES - PART 1: EQUIPMENT PROTECTION BY FLAMEPROOF ENCLOSURES "D"
    IEC 60056:1987 High-voltage alternating-current circuit-breakers
    NACE RP 01 76 : 2003 CORROSION CONTROL OF STEEL FIXED OFFSHORE STRUCTURES ASSOCIATED WITH PETROLEUM PRODUCTION
    NFPA 496 : 2017 PURGED AND PRESSURIZED ENCLOSURES FOR ELECTRICAL EQUIPMENT
    UL 489 : 2013 MOLDED-CASE CIRCUIT BREAKERS, MOLDED-CASE SWITCHES, AND CIRCUIT-BREAKER ENCLOSURES
    CFR 49(PTS186-199) : 0 TRANSPORTATION
    ICEA P 32 382 : 2007(R2018) SHORT CIRCUIT CHARACTERISTICS OF INSULATED CABLES
    IEC 60050-426:2008 International Electrotechnical Vocabulary (IEV) - Part 426: Equipment for explosive atmospheres
    UL 508 : 1999 INDUSTRIAL CONTROL EQUIPMENT
    ISA 60079-18 : 2005 EXPLOSIVE ATMOSPHERES - PART 18: EQUIPMENT PROTECTION BY ENCAPSULATION "M"
    UL 514C : 4 NONMETALLIC OUTLET BOXES, FLUSH-DEVICE BOXES, AND COVERS
    UL 595 : 7ED REV SEP 91 MARINE-TYPE ELECTRIC LIGHTING FIXTURES
    NFPA ELEC INSTALLATIONS IN HAZ LOCATIONS : 2008 ELECTRICAL INSTALLATIONS IN HAZARDOUS LOCATIONS
    IEEE 835 : 1994 POWER CABLE AMPACITY TABLES
    UL 1569 : 4 METAL-CLAD CABLES
    EN 60298:1996/A11:1999 A.C. METAL-ENCLOSED SWITCHGEAR AND CONTROLGEAR FOR RATED VOLTAGES ABOVE 1 KV AND UP TO AND INCLUDING 52 KV
    ISA 60079-11 : 2002 EXPLOSIVE ATMOSPHERES - PART 11: EQUIPMENT PROTECTION BY INTRINSIC SAFETY 'I'
    ISA 60079-6 : 1998 EXPLOSIVE ATMOSPHERES - PART 6: EQUIPMENT PROTECTION BY OIL-IMMERSION 'O'
    UL 1309 : 3 MARINE SHIPBOARD CABLE
    IEEE C37.010 : 1999 AC HIGH-VOLTAGE CIRCUIT BREAKERS > 1000 VAC RATED ON A SYMMETRICAL CURRENT BASIS
    IEEE C37.13 : 2015 LOW-VOLTAGE AC POWER CIRCUIT BREAKERS USED IN ENCLOSURES
    ISA 12.13.01 : 2003 PERFORMANCE REQUIREMENTS FOR COMBUSTIBLE GAS DETECTORS
    ASTM D 4066 : 2013 Standard Classification System for Nylon Injection and Extrusion Materials (PA)
    IEC 60529:1989+AMD1:1999+AMD2:2013 CSV Degrees of protection provided by enclosures (IP Code)
    ISA TR12.21.01 : 2004 USE OF FIBER OPTIC SYSTEMS IN CLASS 1 HAZARDOUS (CLASSIFIED) LOCATIONS
    UL 1203 : 5 EXPLOSION-PROOF AND DUST-IGNITION-PROOF ELECTRICAL EQUIPMENT FOR USE IN HAZARDOUS (CLASSIFIED) LOCATIONS
    UL 1277 : 5 ELECTRICAL POWER AND CONTROL TRAY CABLES WITH OPTIONAL OPTICAL-FIBER MEMBERS
    NFPA 70E : 2018 ELECTRICAL SAFETY IN THE WORKPLACE
    API 505 : 1997 RECOMMENDED PRACTICE FOR CLASSIFICATION OF LOCATIONS FOR ELECTRICAL INSTALLATIONS AT PETROLEUM FACILITIES CLASSIFIED AS CLASS I, ZONE 0, ZONE 1, AND ZONE 2
    IEEE 484-2002 RECOMMENDED PRACTICE FOR INSTALLATION DESIGN AND INSTALLATION OF VENTED LEAD-ACID BATTERIES FOR STATIONARY APPLICATIONS
    NFPA 99 : 2018 HEALTH CARE FACILITIES CODE
    NFPA 70 : 2017 NATIONAL ELECTRICAL CODE
    CFR 29(PT1910.1000 TO END) : 0 LABOR - OCCUPATIONAL SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR
    IEC 60533:2015 Electrical and electronic installations in ships - Electromagnetic compatibility (EMC) - Ships with a metallic hull
    UL 514B : 6 CONDUIT, TUBING, AND CABLE FITTINGS
    FAA AC 70-7460-1 : 2015 OBSTRUCTION MARKING AND LIGHTING
    IEEE 450-2010 IEEE Recommended Practice for Maintenance, Testing, and Replacement of Vented Lead-Acid Batteries for Stationary Applications
    CFR 33(PTS1-124) : JUL 2017 NAVIGATION AND NAVIGABLE WATERS
    IES RP 1 : 2004 PRACTICE FOR OFFICE LIGHTING
    ISA 12.27.01 : 2003 REQUIREMENTS FOR PROCESS SEALING BETWEEN ELECTRICAL SYSTEMS AND FLAMMABLE OR COMBUSTIBLE PROCESS FLUIDS
    ISA 12.20.01 : 2009(R2014) GENERAL REQUIREMENTS FOR ELECTRICAL IGNITION SYSTEMS FOR INTERNAL COMBUSTION ENGINES IN CLASS 1, DIVISION 2 OR ZONE 2, HAZARDOUS (CLASSIFIED) LOCATIONS
    UL 1571 : 4ED REV NOV 99 INCANDESCENT LIGHTING FIXTURES
    API STD 541 : 2014 FORM-WOUND SQUIRREL CAGE INDUCTION MOTORS - 375 KW (500 HORSEPOWER) AND LARGER
    IEEE C37.27-2008 LOW-VOLTAGE AC (635 V AND BELOW) POWER CIRCUIT BREAKERS APPLIED WITH SEPARATELY-MOUNTED CURRENT-LIMITING FUSES
    NFPA 30 : 2018 FLAMMABLE AND COMBUSTIBLE LIQUIDS CODE
    ISA RP12.13.02 : 2003 INSTALLATION, OPERATION, AND MAINTENANCE OF COMBUSTIBLE GAS DETECTION INSTRUMENTS
    UL 13 : 4 POWER-LIMITED CIRCUIT CABLES
    NFPA 77 : 2014 STATIC ELECTRICITY
    UL 783 : 6 ELECTRIC FLASHLIGHTS AND LANTERNS FOR USE IN HAZARDOUS (CLASSIFIED) LOCATIONS
    UL 2250 : 3 INSTRUMENTATION TRAY CABLE
    IEEE C57.12.70-2011 STANDARD TERMINAL MARKINGS AND CONNECTIONS FOR DISTRIBUTION AND POWER TRANSFORMERS
    UL 1570 : 4ED REV NOV 99 FLUORESCENT LIGHTING FIXTURES
    CFR 29(PT1926) : 0 LABOR - OCCUPATIONAL SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR - SAFETY AND HEALTH REGULATIONS FOR CONSTRUCTION
    NFPA 54 : 2018 NATIONAL FUEL GAS CODE
    CFR 30(PTS200-699) : JUL 2017 MINERAL RESOURCES - DEPARTMENT OF THE INTERIOR
    API 14G : 2007 RECOMMENDED PRACTICE FOR FIRE PREVENTION AND CONTROL ON FIXED OPEN-TYPE OFFSHORE PRODUCTION PLATFORMS
    NFPA 37 : 2018 INSTALLATION AND USE OF STATIONARY COMBUSTION ENGINES AND GAS TURBINES
    IEC 60947-2:2016 Low-voltage switchgear and controlgear - Part 2: Circuit-breakers
    ISA 12.10.05 : 2004 ELECTRICAL APPARATUS FOR USE IN ZONE 20, ZONE 21 AND ZONE 22 HAZARDOUS (CLASSIFIED) LOCATIONS - CLASSIFICATION OF ZONE 20, ZONE 21 AND ZONE 22 HAZARDOUS (CLASSIFIED) LOCATIONS
    ISA 12.04.01 : 2003 ELECTRICAL APPARATUS FOR EXPLOSIVE GAS ATMOSPHERES - PART 2: PRESSURIZED ENCLOSURES "P"
    IEEE 1242 : 1999 GUIDE FOR SPECIFYING AND SELECTING POWER, CONTROL AND SPECIAL-PURPOSE CABLE FOR PETROLEUM AND CHEMICAL PLANTS
    NFPA 78 : 1989 LIGHTNING PROTECTION CODE
    IEC 60331:1970 Fire-resisting characteristics of electric cables
    IEEE 515-2011 TESTING, DESIGN, INSTALLATION, AND MAINTENANCE OF ELECTRICAL RESISTANCE TRACE HEATING FOR INDUSTRIAL APPLICATIONS
    API 547 : 2017 GENERAL PURPOSE FORM-WOUND SQUIRREL CAGE INDUCTION MOTORS - 185 KW (250 HP) THROUGH 2240 KW (3000 HP)
    ISA 60079-0 : 2005 EXPLOSIVE ATMOSPHERES - PART 0: EQUIPMENT - GENERAL REQUIREMENTS
    ISA 51.1 : 1979 PROCESS INSTRUMENTATION TERMINOLOGY
    ISA TR12.06.01 : 1999 ELECTRICAL EQUIPMENT IN A CLASS 1, DIVISION 2/ZONE 2 HAZARDOUS LOCATION
    ISA 5.1 : 1984 INSTRUMENTATION SYMBOLS AND IDENTIFICATION
    IEC 60068-2-52:2017 Environmental testing - Part 2-52: Tests - Test Kb: Salt mist, cyclic (sodium chloride solution)
    UL 1096 : 86 REV JAN 88 ELECTRIC CENTRAL AIR HEATING EQUIPMENT
    IEEE C37.04 : 1999 IEEE STANDARD RATING STRUCTURE FOR AC HIGH-VOLTAGE CIRCUIT BREAKERS RATED ON A SYMMETRICAL CURRENT BASIS
    IEEE 485 : 2010 RECOMMENDED PRACTICE FOR SIZING LEAD-ACID BATTERIES FOR STATIONARY APPLICATIONS
    UL 44 : 2018 THERMOSET-INSULATED WIRES AND CABLES
    ISA RP12.06.01 : 2003 RECOMMENDED PRACTICE FOR WIRING METHODS FOR HAZARDOUS (CLASSIFIED) LOCATIONS INSTRUMENTATION - PART 1: INTRINSIC SAFETY
    IEEE 303-2004 IEEE Recommended Practice for Auxiliary Devices for Rotating Electrical Machines in Class I, Division 2 and Zone 2 Locations
    ISA 60079-15 : 2003 EXPLOSIVE ATMOSPHERES - PART 15: EQUIPMENT PROTECTION BY TYPE OF PROTECTION "N"
    IEC 60298:1990 A.C. metal-enclosed switchgear and controlgear for rated voltages above 1 kV and up to and including 52 kV
    NFPA 497 : 2017 CLASSIFICATION OF FLAMMABLE LIQUIDS, GASES, OR VAPORS AND OF HAZARDOUS (CLASSIFIED) LOCATIONS FOR ELECTRICAL INSTALLATIONS IN CHEMICAL PROCESS AREAS
    CSA PLUS 2203 : 2001 HAZARDOUS LOCATIONS - GUIDE FOR THE DESIGN, TESTING, CONSTRUCTION, AND INSTALLATION OF EQUIPMENT IN EXPLOSIVE ATMOSPHERES
    • Access your standards online with a subscription

      Features

      • Simple online access to standards, technical information and regulations
      • Critical updates of standards and customisable alerts and notifications
      • Multi - user online standards collection: secure, flexibile and cost effective