API MPM CH8.2 : 2016
Superseded
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
MANUAL OF PETROLEUM MEASUREMENT STANDARDS - CHAPTER 8.2: STANDARD PRACTICE FOR AUTOMATIC SAMPLING OF PETROLEUM AND PETROLEUM PRODUCTS
Available format(s)
Hardcopy , PDF
Superseded date
25-11-2020
Superseded by
Language(s)
English
Published date
01-11-2016
Publisher
Important note : Users cannot be edited or removed once added to your Multi user PDF.
1 Scope
2 Referenced Documents
3 Terminology
4 Significance and Use
5 Representative Sampling Components
6 Design Criteria
7 Automatic Sampling Systems
8 Sampling Location
9 Mixing of the Flowing Stream
10 Proportionality
11 Sample Extractor Grab Volume
12 Containers
13 Sample Handling and Mixing
14 Control Systems
15 Sample System Security
16 System Proving (Performance Acceptance Tests)
17 Performance Monitoring
18 Crude Oil
19 Refined Products
20 Keywords
Annexes (Mandatory Information)
A1 - Calculation of the Margin of Error Based on Number of
Sample Grabs
A2 - Theoretical Calculations for Selecting the Sampler
Probe Location
A3 - Performance Criteria for Portable Sampling Units
A4 - Profile Performance Test
A5 - Sampler Acceptance Test Data
Appendixes (Nonmandatory Information)
X1 - Design Data Sheet for Automatic Sampling System
X2 - Comparison of Percent Sediment and Water versus
Unloading Time Period
Bibliography
Summary of Changes
Defines general procedures and equipment for automatically obtaining samples of liquid petroleum and petroleum products, crude oils, and intermediate products from the sample point into the primary container.
| DevelopmentNote |
Also numbered as ASTM D 4177. (03/2004) Spanish version of 2ED 1995 is still available, see API MPM CH8.2 SPANISH. (11/2015)
|
| DocumentType |
Standard
|
| Pages |
52
|
| PublisherName |
American Petroleum Institute
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes |
| API MPM CH6.1 : 1991(R2012) | MANUAL OF PETROLEUM MEASUREMENT STANDARDS - CHAPTER 6: METERING ASSEMBLIES - SECTION 1: LEASE AUTOMATIC CUSTODY TRANSFER (LACT) SYSTEMS |
| API MPM CH6.5:1991 | MANUAL OF PETROLEUM MEASUREMENT STANDARDS - CHAPTER 6: METERING ASSEMBLIES - SECTION 5: METERING SYSTEMS FOR LOADING AND UNLOADING MARINE BULK CARRIERS |
| API MPM CH10.1 : 2007(R2012) | MANUAL OF PETROLEUM MEASUREMENT STANDARDS - CHAPTER 10: SEDIMENT AND WATER - SECTION 1: STANDARD TEST METHOD FOR SEDIMENT IN CRUDE OILS AND FUEL OILS BY THE EXTRACTION METHOD |
| API MPM CH5.6 : 2002 : R2008 | MANUAL OF PETROLEUM MEASUREMENT STANDARDS - CHAPTER 5 - METERING - SECTION 6 - MEASUREMENT OF LIQUID HYDROCARBONS BY CORIOLIS METERS |
| API MPM CH10.8:2005 | MANUAL OF PETROLEUM MEASUREMENT STANDARDS - CHAPTER 10: SEDIMENT AND WATER - SECTION 8: STANDARD TEST METHOD FOR SEDIMENT IN CRUDE OIL BY MEMBRANE FILTRATION |
| API MPM CH20.1 : 1993 : R2006 | MANUAL OF PETROLEUM MEASUREMENT STANDARDS - CHAPTER 20 - ALLOCATION MEASUREMENT - SECTION 1 - ALLOCATION MEASUREMENT |
| EI HM 51 : 2015 | PROCEDURES FOR BULK LIQUID CHEMICAL CARGO INSPECTIONS |
| API MPM CH8.1 SPANISH : 2013 | MANUAL OF PETROLEUM MEASUREMENT STANDARDS - CHAPTER 8.1: STANDARD PRACTICE FOR MANUAL SAMPLING OF PETROLEUM AND PETROLEUM PRODUCTS |
| API MPM CH6.1 : 1991 | MANUAL OF PETROLEUM MEASUREMENT STANDARDS - CHAPTER 6: METERING ASSEMBLIES - SECTION 1: LEASE AUTOMATIC CUSTODY TRANSFER (LACT) SYSTEMS |
| ASTM D 1796 : 2011 | Standard Test Method for Water and Sediment in Fuel Oils by the Centrifuge Method (Laboratory Procedure) |
| API 87 : 2007 : R2012 | RECOMMENDED PRACTICE FOR FIELD ANALYSIS OF CRUDE OIL SAMPLES CONTAINING FROM TWO TO FIFTY PERCENT WATER BY VOLUME |
| API MPM CH10.5 : 2013 | MANUAL OF PETROLEUM MEASUREMENT STANDARDS - CHAPTER 10.5: STANDARD TEST METHOD FOR WATER IN PETROLEUM PRODUCTS AND BITUMINOUS MATERIALS BY DISTILLATION |
| API RP 87 : 2007(R2017) | RECOMMENDED PRACTICE FOR FIELD ANALYSIS OF CRUDE OIL SAMPLES CONTAINING FROM TWO TO FIFTY PERCENT WATER BY VOLUME |
| ASTM D 473 : 2007 : R2012 : EDT 1 | Standard Test Method for Sediment in Crude Oils and Fuel Oils by the Extraction Method |
| API 87: 2007 | RECOMMENDED PRACTICE FOR FIELD ANALYSIS OF CRUDE OIL SAMPLES CONTAINING FROM TWO TO FIFTY PERCENT WATER BY VOLUME |
| ASTM D 4807 : 2005 : EDT 1 | Standard Test Method for Sediment in Crude Oil by Membrane Filtration |
| ASTM D 7829 : 2013 : EDT 1 | Standard Guide for Sediment and Water Determination in Crude Oil |
| ASTM D 1298 : 2012 : REV A | Standard Test Method for Density, Relative Density (Specific Gravity), or API Gravity of Crude Petroleum and Liquid Petroleum Products by Hydrometer Method |
| ASTM D 5854 : 1996 : R2000 | Standard Practice for Mixing and Handling of Liquid Samples of Petroleum and Petroleum Products |
| API MPM CH3.1B : 2001(R2016) | MANUAL OF PETROLEUM MEASUREMENT STANDARDS - CHAPTER 3 - TANK GAUGING - SECTION 1B - STANDARD PRACTICE FOR LEVEL MEASUREMENT OF LIQUID HYDROCARBONS IN STATIONARY TANKS BY AUTOMATIC TANK GAUGING |
| ASTM D 473 : 2007 : R2017 | Standard Test Method for Sediment in Crude Oils and Fuel Oils by the Extraction Method |
| API MPM CH8.5 : 2015 | MANUAL OF PETROLEUM MEASUREMENT STANDARDS - CHAPTER 8.5: STANDARD PRACTICE FOR MANUAL PISTON CYLINDER SAMPLING FOR VOLATILE CRUDE OILS, CONDENSATES, AND LIQUID PETROLEUM PRODUCTS |
| API MPM CH10.2 : 2016 | Determination of Water in Crude Oil by Distillation |
| API MPM CH10.1 : 2007 | MANUAL OF PETROLEUM MEASUREMENT STANDARDS - CHAPTER 10: SEDIMENT AND WATER - SECTION 1: STANDARD TEST METHOD FOR SEDIMENT IN CRUDE OILS AND FUEL OILS BY THE EXTRACTION METHOD |
| API MPM CH10.7 : 2002(R2011) | MANUAL OF PETROLEUM MEASUREMENT STANDARDS - CHAPTER 10 - SEDIMENT AND WATER - SECTION 7 - STANDARD TEST METHOD FOR WATER IN CRUDE OILS BY POTENTIOMETRIC KARL FISCHER TITRATION |
| API MPM CH10.6:2013 | MANUAL OF PETROLEUM MEASUREMENT STANDARDS - CHAPTER 10.6: STANDARD TEST METHOD FOR WATER AND SEDIMENT IN FUEL OILS BY THE CENTRIFUGE METHOD (LABORATORY PROCEDURE) |
| API TR 2572 : 2013 | CARBON CONTENT, SAMPLING, AND CALCULATION |
| ASTM D 4377 : 2000 : EDT 1 | Standard Test Method for Water in Crude Oils by Potentiometric Karl Fischer Titration |
| API MPM CH5.6:2002 | MANUAL OF PETROLEUM MEASUREMENT STANDARDS - CHAPTER 5 - METERING - SECTION 6 - MEASUREMENT OF LIQUID HYDROCARBONS BY CORIOLIS METERS |
| API MPMS CH10.6 : 2013(R2016) | MANUAL OF PETROLEUM MEASUREMENT STANDARDS - CHAPTER 10.6: STANDARD TEST METHOD FOR WATER AND SEDIMENT IN FUEL OILS BY THE CENTRIFUGE METHOD (LABORATORY PROCEDURE) |
| API MPM CH18.2 : 2016 | MANUAL OF PETROLEUM MEASUREMENT STANDARDS - CHAPTER 18.2: CUSTODY TRANSFER OF CRUDE OIL FROM LEASE TANKS USING ALTERNATIVE MEASUREMENT METHODS |
| API MPM CH6.6 : 1991 : R2007 | MANUAL OF PETROLEUM MEASUREMENT STANDARDS - CHAPTER 6 - METERING ASSEMBLIES - SECTION 6 - PIPELINE METERING SYSTEMS |
| API MPM CH6.6 : 1991(R2017) | Metering Assemblies: Pipeline Metering Systems |
| ASTM D 4807 : 2005 : R2010 | Standard Test Method for Sediment in Crude Oil by Membrane Filtration |
| API MPM CH17.2 : 1999 | MANUAL OF PETROLEUM MEASUREMENT STANDARDS - CHAPTER 17: MARINE MEASUREMENT - SECTION 2: MEASUREMENT OF CARGOES ON BOARD TANK VESSELS |
| API TR 2573 : 2013(R2018) | Standard Guide for Sediment and Water Determination in Crude Oil Standard Guide for Sediment and Water Determination in Crude Oil |
| ASTM D 473 : 2007 | Standard Test Method for Sediment in Crude Oils and Fuel Oils by the Extraction Method |
| ASTM D 1298 : 2012 : REV B : R2017 | Standard Test Method for Density, Relative Density, or API Gravity of Crude Petroleum and Liquid Petroleum Products by Hydrometer Method |
| ASTM D 6822 : 2012 | Standard Test Method for Density, Relative Density, and API Gravity of Crude Petroleum and Liquid Petroleum Products by Thermohydrometer Method |
| ASTM D 4807 : 2005 : R2015 | Standard Test Method for Sediment in Crude Oil by Membrane Filtration |
| ASTM D 8009 : 2015 | Standard Practice for Manual Piston Cylinder Sampling for Volatile Crude Oils, Condensates, and Liquid Petroleum Products |
| ASTM D 4377 : 2000 | Standard Test Method for Water in Crude Oils by Potentiometric Karl Fischer Titration |
| IEC TR 61831:2011 | On-line analyser systems - Guide to design and installation |
| API MPM CH10.3:2003 | MANUAL OF PETROLEUM MEASUREMENT STANDARDS - CHAPTER 10.3: STANDARD TEST METHOD FOR WATER AND SEDIMENT IN CRUDE OIL BY THE CENTRIFUGE METHOD (LABORATORY PROCEDURE) |
| API MPMS CH10.3 : 2013(R2016) | MANUAL OF PETROLEUM MEASUREMENT STANDARDS - CHAPTER 10.3: STANDARD TEST METHOD FOR WATER AND SEDIMENT IN CRUDE OIL BY THE CENTRIFUGE METHOD (LABORATORY PROCEDURE) |
| ASTM D 1796 : 2011 : R2016 | Standard Test Method for Water and Sediment in Fuel Oils by the Centrifuge Method (Laboratory Procedure) |
| API MPM CH10.7:2002 | MANUAL OF PETROLEUM MEASUREMENT STANDARDS - CHAPTER 10 - SEDIMENT AND WATER - SECTION 7 - STANDARD TEST METHOD FOR WATER IN CRUDE OILS BY POTENTIOMETRIC KARL FISCHER TITRATION |
| API MPM CH17.2 : 1999 : R2006 | MANUAL OF PETROLEUM MEASUREMENT STANDARDS - CHAPTER 17: MARINE MEASUREMENT - SECTION 2: MEASUREMENT OF CARGOES ON BOARD TANK VESSELS |
| API MPM CH10.8 : 2005 : R2010 | MANUAL OF PETROLEUM MEASUREMENT STANDARDS - CHAPTER 10: SEDIMENT AND WATER - SECTION 8: STANDARD TEST METHOD FOR SEDIMENT IN CRUDE OIL BY MEMBRANE FILTRATION |
| API MPMS CH9.4 : 2018 | MANUAL OF PETROLEUM MEASUREMENT STANDARDS - CHAPTER 9.4 - CONTINUOUS DENSITY MEASUREMENT UNDER DYNAMIC (FLOWING) CONDITIONS |
| API MPMS CH9.1 : 2012(R2017) | MANUAL OF PETROLEUM MEASUREMENT STANDARDS - CHAPTER 9.1: STANDARD TEST METHOD FOR DENSITY, RELATIVE DENSITY, OR API GRAVITY OF CRUDE PETROLEUM AND LIQUID PETROLEUM PRODUCTS BY HYDROMETER METHOD |
| API MPMS CH8.5 SPANISH : 2015 | MANUAL OF PETROLEUM MEASUREMENT STANDARDS - CHAPTER 8.5: STANDARD PRACTICE FOR MANUAL PISTON CYLINDER SAMPLING FOR VOLATILE CRUDE OILS, CONDENSATES, AND LIQUID PETROLEUM PRODUCTS |
| API MPM CH6.6 : 1991 : R2012 | MANUAL OF PETROLEUM MEASUREMENT STANDARDS - CHAPTER 6 - METERING ASSEMBLIES - SECTION 6 - PIPELINE METERING SYSTEMS |
| API MPMS CH10.8 : 2005(R2015) | MANUAL OF PETROLEUM MEASUREMENT STANDARDS - CHAPTER 10: SEDIMENT AND WATER - SECTION 8: STANDARD TEST METHOD FOR SEDIMENT IN CRUDE OIL BY MEMBRANE FILTRATION |
| ASTM D 4007 : 2011 | Standard Test Method for Water and Sediment in Crude Oil by the Centrifuge Method (Laboratory Procedure) |
| API MPMS CH17.12 SPANISH : 2015 | API Manual of Petroleum Measurement Standards Chapter 17.12 - EI Hydrocarbon Management HM 51 |
| API MPMS CH17.12 : 2015 | PROCEDURES FOR BULK LIQUID CHEMICAL CARGO INSPECTIONS |
| API MPM CH20.1 : 1993 : R2011 | MANUAL OF PETROLEUM MEASUREMENT STANDARDS - CHAPTER 20 - ALLOCATION MEASUREMENT - SECTION 1 - ALLOCATION MEASUREMENT |
| API MPM CH6.1 : 1991 : R2007 | MANUAL OF PETROLEUM MEASUREMENT STANDARDS - CHAPTER 6: METERING ASSEMBLIES - SECTION 1: LEASE AUTOMATIC CUSTODY TRANSFER (LACT) SYSTEMS |
| API MPM CH5.2:2005 | MANUAL OF PETROLEUM MEASUREMENT STANDARDS - CHAPTER 5 - METERING - SECTION 2 - MEASUREMENT OF LIQUID HYDROCARBONS BY DISPLACEMENT METERS |
| ASTM D 1796 : 2011 : EDT 1 | Standard Test Method for Water and Sediment in Fuel Oils by the Centrifuge Method (Laboratory Procedure) |
| API MPM CH20.5 : 2017 | MANUAL OF PETROLEUM MEASUREMENT STANDARDS - CHAPTER 20.5: RECOMMENDED PRACTICE FOR APPLICATION OF PRODUCTION WELL TESTING IN MEASUREMENT AND ALLOCATION |
| API MPMS CHAPTER 17.2 : 1999(R2011) | MANUAL OF PETROLEUM MEASUREMENT STANDARDS - CHAPTER 17: MARINE MEASUREMENT - SECTION 2: MEASUREMENT OF CARGOES ON BOARD TANK VESSELS |
| API MPM CH10.4 : 2013 | MANUAL OF PETROLEUM MEASUREMENT STANDARDS - CHAPTER 10.4: DETERMINATION OF WATER AND/OR SEDIMENT IN CRUDE OIL BY THE CENTRIFUGE METHOD (FIELD PROCEDURE) |
| ASTM D 4377 : 2000 : R2006 | Standard Test Method for Water in Crude Oils by Potentiometric Karl Fischer Titration |
| ASTM D 5854 : 1996 : R2010 | Standard Practice for Mixing and Handling of Liquid Samples of Petroleum and Petroleum Products |
| ASTM D 6822 : 2012 : REV B : R2017 | Standard Test Method for Density, Relative Density, and API Gravity of Crude Petroleum and Liquid Petroleum Products by Thermohydrometer Method |
| ASTM D 4377 : 2000 : R2011 | Standard Test Method for Water in Crude Oils by Potentiometric Karl Fischer Titration (Withdrawn 2020) |
| ASTM D 4807 : 2005 | Standard Test Method for Sediment in Crude Oil by Membrane Filtration |
| ASTM D 5854 : 1996 : R2015 | Standard Practice for Mixing and Handling of Liquid Samples of Petroleum and Petroleum Products |
| API 551 : 2016 | PROCESS MEASUREMENT |
| EEMUA 138 : 2010 | DESIGN AND INSTALLATION OF ON-LINE ANALYSER SYSTEMS |
| API MPM CH3.1B : 2001 | MANUAL OF PETROLEUM MEASUREMENT STANDARDS - CHAPTER 3 - TANK GAUGING - SECTION 1B - STANDARD PRACTICE FOR LEVEL MEASUREMENT OF LIQUID HYDROCARBONS IN STATIONARY TANKS BY AUTOMATIC TANK GAUGING |
| API MPM CH8.4 : 2017 | MANUAL OF PETROLEUM MEASUREMENT STANDARDS - CHAPTER 8.4: STANDARD PRACTICE FOR SAMPLING AND HANDLING OF FUELS FOR VOLATILITY MEASUREMENT |
| API MPM CH5.6 SPANISH : 2002 | MANUAL OF PETROLEUM MEASUREMENT STANDARDS - CHAPTER 5: METERING - SECTION 6: MEASUREMENT OF LIQUID HYDROCARBONS BY CORIOLIS METERS |
| PD IEC/TR 61831:2011 | On-line analyser systems. Guide to design and installation |
| API MPM CH6.5 : 1991(R2012) | MANUAL OF PETROLEUM MEASUREMENT STANDARDS - CHAPTER 6: METERING ASSEMBLIES - SECTION 5: METERING SYSTEMS FOR LOADING AND UNLOADING MARINE BULK CARRIERS |
| API 3000 : 2014 | CLASSIFYING AND LOADING OF CRUDE OIL INTO RAIL TANK CARS |
| API MPMS : 2016 | MEASUREMENT OF CRUDE OIL BY CORIOLIS METERS |
| ASTM D 5854 : 1996 : R2005 | Standard Practice for Mixing and Handling of Liquid Samples of Petroleum and Petroleum Products |
| API MPM CH3.1B SPANISH : 2001(R2006) | MANUAL OF PETROLEUM MEASUREMENT STANDARDS - CHAPTER 3 : TANK GAUGING - SECTION 1B: STANDARD PRACTICE FOR LEVEL MEASUREMENT OF LIQUID HYDROCARBONS IN STATIONARY TANKS BY AUTOMATIC TANK GAUGING |
| ASTM D 1298 : 2012 | Standard Test Method for Density, Relative Density (Specific Gravity), or API Gravity of Crude Petroleum and Liquid Petroleum Products by Hydrometer Method |
| ASTM D 1298 : 2012 : REV B | Standard Test Method for Density, Relative Density, or API Gravity of Crude Petroleum and Liquid Petroleum Products by Hydrometer Method |
| API MPM CH8.1 : 2013 | MANUAL OF PETROLEUM MEASUREMENT STANDARDS - CHAPTER 8.1: STANDARD PRACTICE FOR MANUAL SAMPLING OF PETROLEUM AND PETROLEUM PRODUCTS |
| API TR 2573 : 2013 | Standard Guide for Sediment and Water Determination in Crude Oil Standard Guide for Sediment and Water Determination in Crude Oil |
| API MPM CH17.1 : 2014 | MANUAL OF PETROLEUM MEASUREMENT STANDARDS - CHAPTER 17.1: GUIDELINES FOR MARINE INSPECTION |
| API MPM CH20.1 : 1993 | MANUAL OF PETROLEUM MEASUREMENT STANDARDS - CHAPTER 20 - ALLOCATION MEASUREMENT - SECTION 1 - ALLOCATION MEASUREMENT |
| ASTM D 4007 : 2011 : R2016 : EDT 1 | Standard Test Method for Water and Sediment in Crude Oil by the Centrifuge Method (Laboratory Procedure) |
| ASTM D 6822 : 2012 : REV A | Standard Test Method for Density, Relative Density, and API Gravity of Crude Petroleum and Liquid Petroleum Products by Thermohydrometer Method |
| API MPM CH10.9 SPANISH : 2013 | MANUAL OF PETROLEUM MEASUREMENT STANDARDS - CHAPTER 10.9: STANDARD TEST METHOD FOR WATER IN CRUDE OILS BY COULOMETRIC KARL FISCHER TITRATION |
| API MPM CH6.6:1991 | MANUAL OF PETROLEUM MEASUREMENT STANDARDS - CHAPTER 6 - METERING ASSEMBLIES - SECTION 6 - PIPELINE METERING SYSTEMS |
| API MPM CH10.9 : 2013 | MANUAL OF PETROLEUM MEASUREMENT STANDARDS - CHAPTER 10.9: STANDARD TEST METHOD FOR WATER IN CRUDE OILS BY COULOMETRIC KARL FISCHER TITRATION |
| API MPM CH6.5 : 1991 : R2007 | MANUAL OF PETROLEUM MEASUREMENT STANDARDS - CHAPTER 6: METERING ASSEMBLIES - SECTION 5: METERING SYSTEMS FOR LOADING AND UNLOADING MARINE BULK CARRIERS |
| BS IEC 61831:1999 | On-line analyser systems. Guide to design and installation |
| API MPM CH5.6 : 2002(R2013) | MANUAL OF PETROLEUM MEASUREMENT STANDARDS - CHAPTER 5 - METERING - SECTION 6 - MEASUREMENT OF LIQUID HYDROCARBONS BY CORIOLIS METERS |
| API MPM CH20.1 : 1993( R2016) | MANUAL OF PETROLEUM MEASUREMENT STANDARDS - CHAPTER 20 - ALLOCATION MEASUREMENT - SECTION 1 - ALLOCATION MEASUREMENT |
| API MPM CH9.3 : 2012(R2017) | MANUAL OF PETROLEUM MEASUREMENT STANDARDS - CHAPTER 9.3: STANDARD TEST METHOD FOR DENSITY, RELATIVE DENSITY, AND API GRAVITY OF CRUDE PETROLEUM AND LIQUID PETROLEUM PRODUCTS BY THERMOHYDROMETER METHOD |
| ASTM D 473 : 2007 : R2012 | Standard Test Method for Sediment in Crude Oils and Fuel Oils by the Extraction Method |
| API MPM CH20.1 : 1993 : INC : ADD 1 : 2013 : R201100 | MANUAL OF PETROLEUM MEASUREMENT STANDARDS - CHAPTER 20 - ALLOCATION MEASUREMENT - SECTION 1 - ALLOCATION MEASUREMENT |
| API MPM CH10.3 REDLINE : 2008 | MANUAL OF PETROLEUM MEASUREMENT STANDARDS - CHAPTER 10: SEDIMENT AND WATER - SECTION 3: STANDARD TEST METHOD FOR WATER AND SEDIMENT IN CRUDE OIL BY THE CENTRIFUGE METHOD (LABORATORY PROCEDURE) |
| API MPM CH5.2 : 2005(R2015) | MANUAL OF PETROLEUM MEASUREMENT STANDARDS - CHAPTER 5 - METERING - SECTION 2 - MEASUREMENT OF LIQUID HYDROCARBONS BY DISPLACEMENT METERS |
| API MPM CH17.2 SPANISH : 1999 | MANUAL DE ESTANDARES DE MEDICION DE PETROLEO - CAPITULO 17: MEDICIONES MARITIMAS - SECCION 2: MEDICIONES DE CARGAS A BORDO DE BUQUE TANQUES |
| ASTM D 4007 : 2011 : EDT 1 | Standard Test Method for Water and Sediment in Crude Oil by the Centrifuge Method (Laboratory Procedure) |
| ASTM D 3089 : 1997 : R2008 | Standard Practice for Determining the A-D Dimension of Aerosol Valve Dip Tubes |
| ASTM D 473 : 2007 : R2017 : EDT 1 | Standard Test Method for Sediment in Crude Oils and Fuel Oils by the Extraction Method |
| ASTM D 7829 : 2013 : R2018 | Standard Guide for Sediment and Water Determination in Crude Oil |
| ASTM D 7829 : 2013 | Standard Guide for Sediment and Water Determination in Crude Oil |
| IP 359 : 1982 | DETERMINATION OF WATER AND SEDIMENT CONTENT OF CRUDE OILS - CENTRIFUGE METHOD |
| ASTM D 4007 : 2011 : R2016 | Standard Test Method for Water and Sediment in Crude Oil by the Centrifuge Method (Laboratory Procedure) |
| ASTM D 6822 : 2012 : REV B | Standard Test Method for Density, Relative Density, and API Gravity of Crude Petroleum and Liquid Petroleum Products by Thermohydrometer Method |
| ISO 3171:1988 | Petroleum liquids — Automatic pipeline sampling |
| ASTM D 4840 : 1999 | Standard Guide for Sampling Chain-of-Custody Procedures |
| ASTM D 3700 : 2016 : REDLINE | Standard Practice for Obtaining LPG Samples Using a Floating Piston Cylinder |
| ISO 3170:2004 | Petroleum liquids — Manual sampling |
| ISO 4257:2001 | Liquefied petroleum gases Method of sampling |
| API MPM CH8.1 : 2013 | MANUAL OF PETROLEUM MEASUREMENT STANDARDS - CHAPTER 8.1: STANDARD PRACTICE FOR MANUAL SAMPLING OF PETROLEUM AND PETROLEUM PRODUCTS |
| GPA 2174 : 2014 | OBTAINING LIQUID HYDROCARBONS SAMPLES FOR ANALYSIS BY GAS CHROMATOGRAPHY |
| API MPM CH8.4 : 2014 | MANUAL OF PETROLEUM MEASUREMENT STANDARDS - CHAPTER 8.4: STANDARD PRACTICE FOR SAMPLING AND HANDLING OF FUELS FOR VOLATILITY MEASUREMENT |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.