AS 1085.20-2012
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Railway track material Welding of steel rail
Hardcopy , PDF 1 User , PDF 3 Users , PDF 5 Users , PDF 9 Users
28-07-2020
English
29-11-2012
Important note : Users cannot be edited or removed once added to your Multi user PDF.Sets out performance requirements and tests for welding of steel rail. Gives detailed requirements for flash butt welding, aluminothermic welding and metal arc welding (for repairs). Qualification of the welding procedure is covered, including criteria for requalification when parameters are changed. Test methods are given in appendices.
| Committee |
CE-002
|
| DocumentType |
Standard
|
| ISBN |
978 1 74342 282 3
|
| Pages |
85
|
| PublisherName |
Standards Australia
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes |
This Standard specifies requirements for the qualification of welds in steel rail manufactured in accordance with AS 1085.1 or rails that are shown to be metallurgically equivalent, for use in railway track. The following welding processes are covered:(a) Joining of rails by flash butt welding or aluminothermic fusion welding.(b) Repair of the railhead by arc welding or aluminothermic fusion welding.The Standard does not provide strength properties of welds for use in design nor cover the welding of austenitic manganese steels.NOTES: 1 Rail steel is considered to be very difficult to weld for structural purposes. It is not recommended that welded rail be used in applications other than railway track.2 Rail produced to specifications other than AS 1085.1 may require a separate qualification process. Appropriate testing may need to be determined.
Originated as AS 1085.15-1995.
Previous edition AS 1085.20-2006.
Second edition 2012.
| AS 2205.5.1-2003 | Methods for destructive testing of welds in metal Macro metallographic test for cross-section examination (Reconfirmed 2018) |
| AS 2812-2005 | Welding, brazing and cutting of metals - Glossary of terms (Reconfirmed 2018) |
| AS 1085.1-2002 | Railway track material Steel rails (Reconfirmed 2013) |
| AS 1085.12-2002 | Railway track material Insulated joint assemblies (Reconfirmed 2013) |
| AS 1816.1-2007 | Metallic materials - Brinell hardness test Test method (ISO 6506-1:2005, MOD) (Reconfirmed 2017) |
| AS 1085.10-2002 | Railway track material Rail anchors (Reconfirmed 2013) |
| AS 1085.14-2003 | Railway track material Prestressed concrete sleepers |
| AS 1199.1-2003 | Sampling procedures for inspection by attributes Sampling schemes indexed by acceptance quality limit (AQL) for lot-by-lot inspection (Reconfirmed 2016) |
| AS/NZS ISO 9004:2011 | Managing for the sustained success of an organization - A quality management approach |
| AS 1817.1-2003 | Metallic materials - Vickers hardness test Test method (ISO 6507-1:1997, MOD) |
| AS 1085.17-2003 | Railway Track Material Steel Sleepers (Reconfirmed 2013) |
| AS 1085.19-2003 | Railway track material Resilient fastening assemblies (Reconfirmed 2013) |
| AS 2193-2005 | Calibration and classification of force-measuring systems (Reconfirmed 2017) |
| AS 2207-2007 | Non-destructive testing - Ultrasonic testing of fusion welded joints in carbon and low alloy steel (Reconfirmed 2017) |
| AS/NZS 2980:2007 | Qualification of welders for fusion welding of steels |
| AS 2205.6.1-2003 | Methods for destructive testing of welds in metal Weld joint hardness test |
| AS 1199.0-2003 | Sampling procedures for inspection by attributes Introduction to the ISO 2859 attribute sampling system (Reconfirmed 2016) |
| AS 2083-2005 | Calibration blocks and their methods of use in ultrasonic testing |
| AS 1085.13-2002 | Railway track material Spring fastening spikes for sleeper plates (Reconfirmed 2013) |
| HB 18.28-2005 | Conformity assessment - Guidance on a third-party certification system for products |
| AS 3998-2006 | Non-destructive testing - Qualification and certification of personnel |
| AS 1085.18-2003 | Railway track material Screw spikes and threaded inserts |
| AS 1101.3-2005 | Graphical symbols for general engineering Welding and non-destructive examination |
| AS 1003-1971 | Engineers' straightedges (metric units) |
| AS/NZS ISO 9001:2008 | Quality management systems - Requirements |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.