AS 1721-1985
Current
The latest, up-to-date edition.
General purpose metric screw threads (Reconfirmed 2017)
Hardcopy , PDF 1 User , PDF 3 Users , PDF 5 Users , PDF 9 Users
17-05-1985
Specifies requirements for single start parallel metric screw threads having the ISO basic profile for triangular screw threads, covering the size range from 1mm diameter to 355mm diameter inclusive. Provides for a coarse pitch series, a fine pitch series and a constant pitch series, the latter intended for use in applications for which either the coarse or fine pitch series are unsuitable. Gives information on screw thread parameters, tolerances, deviations, thread classes, designation and symbols. Appendices are included giving the basis of the tabulated values, guidelines (with examples) for calculating the limits of size of untabulated screw threads and notes on the production of screw threads.
Committee |
ME-028
|
DocumentType |
Standard
|
ISBN |
0 7262 3611 X
|
Pages |
84
|
ProductNote |
Reconfirmed 07/07/2017.This standard has been reconfirmed in Australia in 2017 and remains current in New Zealand. Reconfirmation Notice 07/07/2017
|
PublisherName |
Standards Australia
|
Status |
Current
|
Supersedes |
This standard specifies requirements for single start parallel metric screw threads having the ISO basic profile for triangular screw threads, covering the size range from 1 mm diameter to 355 mm diameter inclusive. The metric screw thread system comprises the following series:(a) The ISO coarse pitch series, which gives graded diameter/pitch combinations in diameters from 1 mm to 68 mm inclusive, and is predominantly intended for commercially produced threaded fasteners.(b) The ISO fine pitch series, which gives graded diameter/pitch combinations in diameters from 1 mm to 33 mm inclusive.(c) The ISO constant pitch series, which gives a series of standard pitches to be associated with diameters from 8 mm to 355 mm inclusive.The standard gives information on screw thread parameters, tolerances, deviations, thread classes, designation and symbols.Due to the methods adopted by ISO for rounding the tabulated values (see Appendix A), the values for the various parameters given in the tables are to be taken as authoritative for the application of this standard.Appendices are included giving the basis of the tabulated values, guidelines (with examples) for calculating the limits of size of untabulated screw threads and notes on the production of screw threads.NOTE: The ISO metric screw thread system, as given in this standard, does not provide for interference fit threads.
Standards | Relationship |
ISO 261:1973 | Identical |
ISO 262:1973 | Identical |
ISO 965-3:1980 | Identical |
ISO 965-2:1980 | Identical |
ISO 724:1978 | Identical |
ISO 965-1:1980 | Identical |
First published 1975.
Second edition 1985.
Incorporating: Amdt 1-1987.
AS 2052-1977 | Metallic conduits and fittings |
AS 1897-1976 | Electroplated coatings on threaded components (metric coarse series) |
AS 1014-1986 | Gauging of metric screw threads (Reconfirmed 2018) |
AS/NZS 1110:1995 | ISO metric precision hexagon bolts and screws |
AS 2053-1984 | Non-metallic conduits and fittings |
AS 1098-1972 | Roller-type screw calliper gauges |
AS 1214-1983 | Hot-dip galvanized coatings on threaded fasteners (ISO metric coarse thread series) |
AS 1654-1974 | Limits and fits for engineering (Metric units) |
AS/NZS 1252:1996 | High-strength steel bolts with associated nuts and washers for structural engineering |
AS 2470-2005 | Steel cylinders for compressed gases - Welded three-piece construction with longitudinal joint - 11 kg to 150 kg (Reconfirmed 2016) |
AS 3517-2007 | Capillary fittings of copper and copper alloy for non-pressure sanitary plumbing applications (Reconfirmed 2018) |
AS 2470-1995 | Steel cylinders for compressed gases - Welded - 11 kg to 150 kg |
AS 2896-1998 | Medical gas systems - Installation and testing of non-flammable medical gas pipeline systems |
AS 3777-1990 | Shank hooks and large-eye hooks - Maximum 25 t |
AS 1275-1985 | |
AS 2319-2001 | Rigging screws and turnbuckles |
AS/NZS 4331.1:1995 | Metallic flanges Steel flanges (Reconfirmed 2020) |
AS 2089-1993 | Sheave blocks for lifting purposes |
AS 3985.1-1991 | Manipulating industrial robots - Mechanical interfaces - Circular (form A) |
AS 2469-1998 | Steel cylinders for compressed gases - Welded two-piece construction - 0.1 kg to 35 kg |
AS 1210-2010 | Pressure vessels (Reconfirmed 2021) |
AS 3517-1995 | Capillary fittings of copper and copper alloy for non-pressure sanitary plumbing applications |
AS 1359.47-1988 | Rotating electrical machines - General requirements Brushes and brush-holders - Dimensions |
AS 2710-1984 | Screw gauges - Verification |
AS 2974-1987 | Fluid power systems and components - Metric ports - Dimensions and design |
AS/NZS 2496:1995 | Breathing attachments for anaesthetic purposes for human use |
AS 3577-1999 | Steel cylinders for compressed gases - Welded - 150 kg to 500 kg |
AS 1364.1-1979 | Circular machine screwing dies, circular hand screwing dies and hexagon die-nuts - General purpose metric screw threads |
AS/NZS 3188:1995 | Approval and test specification - Terminations and glands for mineral-insulated metal-sheathed cables |
AS 4041-2006 | Pressure piping (Reconfirmed 2016) |
AS 2380.2-1991 | Electrical equipment for explosive atmospheres - Explosion-protection techniques Flameproof enclosure d |
AS 3613-1991 | Information technology - Data communications - 15-pole DTE/DCE interface connector and contact number assignments |
AS 3577-2006 | Steel cylinders for compressed gases - Welded - 150 kg to 500 kg |
AS 1214-1983 | Hot-dip galvanized coatings on threaded fasteners (ISO metric coarse thread series) |
AS/NZS 60065:2003 | Audio, video and similar electronic apparatus - Safety requirements (IEC 60065:2001, MOD) |
AS 4041-1992 | Pressure piping |
AS/NZS 1112:1996 | ISO metric hexagon nuts, including thin nuts, slotted nuts and castle nuts |
AS 2089-2008 | Sheave blocks for lifting purposes (Reconfirmed 2019) |
AS 1551-1983 | Performance of household electrical appliances - Manually operated controls for heating units in ranges, built-in cooking tops and wall-mounted ovens |
AS/NZS 4291.2:1995 | Mechanical properties of fasteners Nuts with specified proof load values - Coarse thread |
AS/NZS 4291.1:1995 | Mechanical properties of fasteners Bolts, screws and studs |
AS/NZS 60065:2012 | Audio, video and similar electronic apparatus - Safety requirements (IEC 60065, Ed.7.2 (2011) MOD) |
AS 2528-1982 | Bolts, studbolts and nuts for flanges and other high and low temperature applications |
AS/NZS 2053.7:2002 | Conduits and fittings for electrical installations Rigid metal conduits and fittings (Reconfirmed 2016) |
AS/NZS 3260:1993 | Approval and test specification - Safety of information technology equipment including electrical business equipment |
AS 2317-1998 | Collared eyebolts |
AS 2103-1978 | Dial gauges and dial test indicators (metric series) |
AS/NZS 2794:1994 | Information technology - Telecommunications and information exchange between systems - 34-pole DTE/DCE interface connector mateability dimensions and contact number assignments |
AS 3777-2008 | Shank hooks and large eye hooks - Maximum 60 t (Reconfirmed 2019) |
AS 2952.2-1988 | Earth-moving machinery - Basic shapes and dimensions - Drain, fill and level plugs |
AS 2748-1991 | Information technology - Data communication - 25-pole DTE/DCE interface connector and contact number assignments |
AS 2019-1986 | Fluid power - Hydraulic and pneumatic cylinders - Bore and rod dimensions |
AS 1210-1997 | Pressure vessels |
AS 2896-2011 | Medical gas systems - Installation and testing of non-flammable medical gas pipeline systems |
AS 2318-2006 | Swivels for lifting applications (Reconfirmed 2022) |
AS 4291.1-2000 | Mechanical properties of fasteners made of carbon steel and alloy steel - Bolts, screws and studs |
AS/NZS 1110:1995 | ISO metric precision hexagon bolts and screws |
AS 2741-1992 | Shackles |
AS/NZS 1873.4:2003 | Powder-actuated (PA) hand-held fastening tools - Fasteners |
AS 2474-1990 | Valves for compressed gas cylinders (diameter-indexed outlets) |
AS 2181.1-1978 | Screwing Taps General Purpose Metric Screw Threads |
AS 2469-2005 | Steel cylinders for compressed gases - Welded two-piece construction - 0.1 kg to 150 kg |
AS 1014-1986 | Gauging of metric screw threads (Reconfirmed 2018) |
AS/NZS 1873.4:1994 | Powder-actuated (PA) hand-held fastening tools - Fasteners |
AS 2468-1989 | Steel cylinders for compressed gases - Brazed - 0.1 kg to 11 kg |
AS/NZS 3612:1994 | Information technology - Data communication - 37-pole DTE/DCE interface connector and contact number assignments |
AS/NZS 2053.7:1995 | Conduits and fittings for electrical installations Rigid metal conduits and fittings |
AS 1897-1976 | Electroplated coatings on threaded components (metric coarse series) |
AS 2741-2002 | Shackles (Reconfirmed 2014) |
AS 2470-1998 | Steel cylinders for compressed gases - Welded three-piece construction with longitudinal joint - 11 kg to 150 kg |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.