AS 1984-1977
Withdrawn
A Withdrawn Standard is one, which is removed from sale, and its unique number can no longer be used. The Standard can be withdrawn and not replaced, or it can be withdrawn and replaced by a Standard with a different number.
Vernier callipers (metric series)
Hardcopy , PDF 1 User , PDF 3 Users , PDF 5 Users , PDF 9 Users
19-12-2019
English
01-09-1977
Specifies materials, properties, basic design details, accuracy and finish of vernier callipers reading to 0.1 and 0.05 mm in sizes up to 1000 mm and to 0.02 mm in sizes up to 300 mm. An appendix gives notes on the testing of the more important features of the instruments. It does not apply to dial callipers but these callipers may comply except for read-out and indicating mechanism.
Committee |
ME-027
|
DocumentType |
Standard
|
ISBN |
0 7262 1129 X
|
Pages |
17
|
ProductNote |
Withdrawn 19-12-2019.
|
PublisherName |
Standards Australia
|
Status |
Withdrawn
|
Supersedes |
This standard specifies requirements for vernier callipers reading to 0,1 (1/10), 0,05 (1/20), and 0,02 (1/50) mm, and having measuring ranges as given in Table 1.Requirements for materials and properties, basic design, accuracy and finish are also specified.NOTE: Notes on methods for testing the more important features of vernier callipers are given in Appendix A. These notes are for guidance only and do not purport to be either recommended or mandatory methods of test.Although dial callipers are not specified in this standard (see Preface), they should comply with all relevant requirements except those for the read-out and indicating mechanism.
Reconfirmed 1989
Under Revision See DR 96365
AS 4130(INT)-1993 | PE pipes, pressure applications |
AS/NZS 1462.11:1996 | Methods of test for PVC pipes and fittings Method for high temperature stress-relief testing of fittings (Reconfirmed 2017) |
AS 3518.1-1988 | Acrylonitrile butadiene styrene (ABS) pipes and fittings for pressure applications - Pipes |
AS 2698.1-1984 | Plastics pipes and fittings for irrigation and rural applications Polyethylene micro-irrigation pipe |
AS 2888.2-1993 | Methods of testing plastics waste fittings Method for determining dimensions |
AS/NZS 1462.1:1996 | Methods of test for PVC pipes and fittings Method for determining the dimensions of pipes and fittings |
AS 1012.10-2000 | Methods of testing concrete Determination of indirect tensile strength of concrete cylinders ('Brazil' or splitting test) (Reconfirmed 2014) |
AS 4131(INT)-1993 | PE pipe compounds |
AS 2888.2-2002 | Methods of testing plastics waste fittings Method for determining dimensions |
AS/NZS 1462.1:2001 | Methods of test for plastics pipes and fittings Method for determining the dimensions of pipes and fittings |
AS 2492-1994 | Cross-linked polyethylene (PE-X) pipe for hot and cold water applications |
AS 3572.12-2002 | Plastics - Glass filament reinforced plastics (GRP) - Methods of test Determination of initial failure pressure and initial hoop strength of glass filament reinforced plastics pipes |
AS/NZS 2544:1995 | Grey iron pressure fittings |
AS 1463-1988 | Polyethylene pipe extrusion compounds |
AS 3518.2-1988 | Acrylonitrile butadiene styrene (ABS) pipes and fittings for pressure applications - Solvent cement fittings |
AS/NZS 4130:2001 | Polyethylene (PE) pipes for pressure applications |
AS/NZS 4130:1997 | Polyethylene (PE) pipes for pressure applications |
AS/NZS 4131:1997 | Polyethylene (PE) compounds for pressure pipes and fittings |
AS 4176-1994 | Polyethylene/aluminium and cross-linked polyethylene/aluminium macro-composite pipe systems for pressure applications |
AS 1774.7-2008 | Refractories and refractory materials - Physical test methods Permeability to gases (Reconfirmed 2018) |
AS/NZS 2280:2004 | Ductile iron pipes and fittings |
AS 3572.13-2002 | Plastics - Glass filament reinforced plastics (GRP) - Methods of test Determination of the initial longitudinal tensile strength of glass filament reinforced plastics pipes |
SAA/SNZ HB86.2:1998 | A guide to the selection, care, calibration and checking of measuring instruments in industry Simple length and angle measuring instruments |
AS/NZS 2280:2014 | Ductile iron pipes and fittings |
AS/NZS 2280:1995 | Ductile iron pressure pipes and fittings |
AS/NZS 2642.1:1994 | Polybutylene pipe systems - Polybutylene (PB) pipe extrusion compounds |
AS/NZS 4131:2001 | Polyethylene (PE) compounds for pressure pipes and fittings |
AS/NZS 1462.1:2006 | Methods of test for plastics pipes and fittings Method for determining the dimensions of pipes and fittings (Reconfirmed 2024) |
AS/NZS 4327:1995 | Metal-banded flexible couplings for low-pressure applications (Reconfirmed 2020) |
AS 1774.7-2001 | Refractories and refractory materials - Physical test methods Permeability to gases |
AS 2891.9.3-2005 | Methods of sampling and testing asphalt Determination of bulk density of compacted asphalt - Mensuration method |
AS/NZS 2179.1:1994 | Specifications for rainwater goods, accessories and fasteners Metal shape or sheet rainwater goods, and metal accessories and fasteners |
AS/NZS 2280:1999 | Ductile iron pressure pipes and fittings |
AS/NZS 2280:2012 | Ductile iron pipes and fittings |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.