Skip to content
Please enter a keyword to search
  • Preview

    AS 2062-1997

    View superseded by
    Superseded A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
    View superseded by

    Non-destructive testing - Penetrant testing of products and components

    Available format(s):  Hardcopy, PDF 1 User, PDF 3 Users, PDF 5 Users, PDF 9 Users

    Superseded date:  06-03-2020

    Language(s):  English

    Published date:  01-01-1997

    Publisher:  Standards Australia

    Add To Cart

    Abstract - (Show below) - (Hide below)

    Specifies requirements and test procedures for visible dye and fluorescent penetrant testing of non-porous products and components for the detection of discontinuities that are open to the surface. Process control procedures and requirements for standard test panels are specified in appendices.

    Scope - (Show below) - (Hide below)

    This Standard specifies requirements for the penetrant testing of non-porous products and components for the detection of discontinuities that are open to the surface. It also specifies requirements for the materials used in penetrant testing, and requirements for process control.This Standard is intended for use in all situations where penetrant testing is used, including on-site testing and permanent factory installations.NOTES:1 Penetrant testing is usually applied to non-magnetic metallic materials but can be used on any material regardless of its physical properties, provided that its surface is non-absorbent and compatible with the process.2 Special requirements apply when penetrant-testing liquid oxygen system components.3 Advice and recommendations on information to be supplied by the purchaser at the time of enquiry and order are given in Appendix A.

    History - (Show below) - (Hide below)

    First published in part as AS B260.3A-1968 (being endorsement of BS 3889.3A:1965 with Amendment).AS B297 first published 1970.AS B260.3A-1968 and AS B297-1970 revised, amalgamated and redesignated AS 2062-1977.AS 2565 first published 1982.AS 2062-1977 and AS 2565-1982 revised, amalgamated and designated AS 2062-1997. First published in part as AS B260.3A-1968 (being endorsement of BS 3889.3A:1965 with Amendment). AS B297 first published 1970. AS B260.3A-1968 and AS B297-1970 revised, amalgamated and redesignated AS 2062-1977. AS 2565 first published 1982. AS 2062-1977 and AS 2565-1982 revised, amalgamated and designated AS 2062-1997.

    Standards Referenced By This Book - (Show below) - (Hide below)

    AS 3669-2006 Non-destructive testing - Qualification and approval of personnel - Aerospace
    AS 1627.4-2005 Metal finishing - Preparation and pretreatment of surfaces Abrasive blast cleaning of steel (Reconfirmed 2017)
    AS 2193-2005 Calibration and classification of force-measuring systems (Reconfirmed 2017)
    AS 1929-1981 Non-destructive testing - Glossary of terms
    AS 3998-1992 Non-destructive testing - Qualification and certification of personnel - General engineering
    JIS Z 2343:1992 Method For Liquid Penetrant Testing And Classification Of The Indication
    AS 3998-2006 Non-destructive testing - Qualification and certification of personnel
    AS 1627.4-1989 Metal finishing - Preparation and pretreatment of sufaces - Abrasive blast cleaning
    AS 2193-1978 Methods for calibration and grading of force-measuring systems of testing machines
    AS 1470-1986 Health and safety at work - Principles and practices
    AS 3669-1989 Non-destructive testing - Qualification and registration of personnel - Aerospace
    AS 1449-1994 Wrought alloy steels - Stainless and heat-resisting steel plate, sheet and strip

    Standards Referencing This Book - (Show below) - (Hide below)

    AS 1988.1-2006 Welding of ferrous castings - Steel castings
    AS/NZS 1554.3:2002 Structural steel welding - Welding of reinforcing steel
    AS/NZS 1554.1:1995 Structural steel welding Welding of steel structures
    AS/NZS 1554.1:2004 Structural steel welding Welding of steel structures
    AS/NZS 2980:2018 Qualification of welders for fusion welding of steels - Additional requirements for Australia and New Zealand
    AS 2885.2-2002 Pipelines - Gas and liquid petroleum - Welding
    AS/NZS 3992:1998 Pressure equipment - Welding and brazing qualification
    AS 2938-1993 Gears - Spur and helical - Guide to specification and rating
    AS 2885.2-1995 Pipelines - Gas and liquid petroleum - Welding
    AS EN 12079.1-2010 Offshore containers and associated lifting sets Offshore containers - Design, manufacture and marking (EN 12079-1:2006, MOD)
    AS/NZS 1554.4:2004 Structural steel welding - Welding of high strength quenched and tempered steels
    AS/NZS 1554.7:2006 Structural steel welding Welding of sheet steel structures
    AS 1796-2001 Certification of welders and welding supervisors (Reconfirmed 2016)
    AS 1447-2007 Hot-rolled spring steels (Reconfirmed 2017)
    AS 4037-1992 Boilers and pressure vessels - Examination and testing
    AS 4722-2009 Passenger ropeways and passenger conveyors
    AS 1796-1993 Certification of welders and welding supervisors
    AS/NZS 3679.2:2016 Structural steel Welded I sections
    AS/NZS 1554.4:2010 Structural steel welding Welding of high strength quenched and tempered steels
    AS 3978-1991 Non-destructive testing - Visual inspection of metal products and components
    AS 3776-2006 Lifting components for Grade T chain slings
    AS/NZS 1554.6:2012 Structural steel welding Welding stainless steels for structural purposes
    AS 1565-1996 Copper and copper alloys - Ingots and castings (Reconfirmed 2020)
    AS 3533.3-2003 Amusement rides and devices In-service inspection (Reconfirmed 2013)
    AS 1874-2000 Aluminium and aluminium alloys - Ingots and castings (Reconfirmed 2018)
    AS/NZS 2885.2:2016 Pipelines - Gas and liquid petroleum - Welding
    AS 4544.1-1999 Non-destructive testing - Eddy current testing for the detection of surface flaws - In non-ferromagnetic metallic products
    AS 3954:2019 Motor vehicle driver controls - Adaptive systems for people with disabilities
    AS 4544-2005 Non-destructive testing - Eddy current testing for the detection of surface flaws - Ferromagnetic and non-ferromagnetic metallic products
    AS 3978-2003 Non-destructive testing - Visual inspection of metal products and components (Reconfirmed 2022)
    AS 3992-1992 Boilers and pressure vessels - Welding and brazing qualification
    AS 1443-2004 Carbon and carbon-manganese steel - Cold finished bars (Reconfirmed 2022)
    AS/NZS 3788:1996 Pressure equipment - In-service inspection
    AS 5100.8:2017 Bridge design Rehabilitation and strengthening of existing bridges
    AS/NZS 3679.1:2016 Structural steel Hot-rolled bars and sections
    AS 2885.2-2007 Pipelines - Gas and liquid petroleum Welding
    AS 4041-1992 Pressure piping
    AS 4037-1999 Pressure equipment - Examination and testing (Reconfirmed 2016)
    AS 1443-1994 Carbon steels and carbon-manganese steels - Cold-finished bars
    AS 1447-1991 Hot-rolled spring steels
    AS/NZS 1554.6:1994 Structural steel welding - Welding stainless steels for structural purposes
    AS 2337.2-2004 Gas cylinder test stations LP Gas fuel vessels for automotive use (Reconfirmed 2016)
    AS 3954.2-1991 Motor vehicle controls - Adaptive systems for people with disabilities Hand controls - Product requirements (Reconfirmed 2014)
    AS 2837-1986 Wrought alloy steels - Stainless steel bars and semi-finished products
    AS/NZS 3679.1:1996 Structural steel Hot-rolled bars and sections
    AS 3777-2008 Shank hooks and large eye hooks - Maximum 60 t (Reconfirmed 2019)
    AS/NZS 3788:2006 Pressure equipment - In-service inspection (Reconfirmed 2017)
    AS 4738.1-2007 Metal castings - Ferrous sand moulded
    AS 4738.1-2004 Metal castings - Ferrous sand moulded
    AS 1554.1-1991 Structural steel welding (known as the SAA Structural Steel Welding Code) - Welding of steel structures
    AS/NZS 1554.1:2000 Structural steel welding Welding of steel structures
    AS 1448-2007 Carbon steel and carbon-manganese steels - Forgings (ruling section 300 mm maximum)
    AS/NZS 1554.3:2008 Structural steel welding Welding of reinforcing steel
    AS EN 12079.3-2010 Offshore containers and associated lifting sets Periodic inspection, examination and testing (EN 12079-3:2006, MOD)
    AS/NZS 2980:2007 Qualification of welders for fusion welding of steels
    AS/NZS 5131:2016 Structural steelwork - Fabrication and erection
    AS 4795.2-2011 Butterfly valves for waterworks purposes Double flanged
    AS/NZS 3788:2001 Pressure equipment - In-service inspection
    AS/NZS 3679.2:1996 Structural steel - Welded I sections
    AS/NZS 3679.2:2010 Structural steel Welded I sections
    AS/NZS 1554.4:1995 Structural steel welding - Welding of high strength quenched and tempered steels
    AS/NZS 1554.1:2011 Structural steel welding Welding of steel structures
    AS 2741-2002 Shackles
    AS 3679.2-1991 Structural steel - Welded sections
    View more information

    • Access your standards online with a subscription

      Features

      • Simple online access to standards, technical information and regulations
      • Critical updates of standards and customisable alerts and notifications
      • Multi - user online standards collection: secure, flexibile and cost effective