• Shopping Cart
    There are no items in your cart

AS 2103-1978

Withdrawn

Withdrawn

A Withdrawn Standard is one, which is removed from sale, and its unique number can no longer be used. The Standard can be withdrawn and not replaced, or it can be withdrawn and replaced by a Standard with a different number.

Dial gauges and dial test indicators (metric series)

Available format(s)

Hardcopy , PDF 1 User , PDF 3 Users , PDF 5 Users , PDF 9 Users

Withdrawn date

19-12-2019

Language(s)

English

Published date

01-07-1978

€26.31
Excluding VAT

1 - AS 2103-1978 DIAL GAUGES AND DIAL TEST INDICATORS (METRIC SERIES)
4 - PREFACE
6 - CONTENTS
7 - SECTION 1. SCOPE AND GENERAL
7 - 1.1 SCOPE.
7 - 1.2 APPLICATION.
7 - 1.3 NOMENCLATURE.
7 - 1.4 TERMS AND DEFINITIONS.
7 - 1.4.1 Dial gauge
7 - 1.4.2 Dial test indicator
7 - 1.4.3 Scale mark
9 - 1.4.4 Scale interval
9 - 1.4.5 Scale division
9 - 1.4.6 Discrimination
9 - 1.4.7 Hysteresis
9 - 1.4.8 Hysteresis band
9 - 1.4.9 Repeatability
9 - 1.4.10 Limits of error
9 - 1.4.11 Calibration
9 - 1.5 REFERENCE TEMPERATURE.
9 - 1.6 MARKING.
9 - 1.7 PACKAGING.
10 - SECTION 2. DIAL GAUGES
10 - 2.1 SCOPE OF SECTION.
10 - 2.2 GENERAL DESIGN FEATURES.
10 - 2.2.1 General.
10 - 2.2.2 Case Design.
10 - 2.2.3 Dial Cover.
10 - 2.2.4 Zero Adjustment.
10 - 2.2.5 Back Lug Fixings.
10 - 2.2.6 Plunger.
10 - 2.3 GENERAL DIMENSIONS AND REQUIREMENTS.
10 - 2.3.1 General Dimensions.
10 - 2.3.2 Dial.
12 - 2.3.3 Pointer.
13 - 2.3.4 Revolution Counter.
13 - 2.3.5 Plunger.
14 - 2.3.6 Contact Point.
14 - 2.4 PERFORMANCE.
14 - 2.4.1 General.
14 - 2.4.2 Discrimination.
14 - 2.4.3 Repeatability of Reading.
14 - 2.4.4 Calibration.
16 - SECTION 3. DIAL TEST INDICATORS
16 - 3.1 SCOPE OF SECTION.
16 - 3.2 GENERAL DESIGN FEATURES.
16 - 3.2.1 General.
16 - 3.2.2 Stylus Lever.
16 - 3.2.3 Case Design.
16 - 3.2.4 Dial Cover.
16 - 3.2.5 Zero Adjustment.
16 - 3.2.6 Bias Reversal.
16 - 3.3 GENERAL DIMENSIONS AND REQUIREMENTS.
16 - 3.3.1 General Dimensions.
16 - 3.3.2 Dial.
17 - 3.3.3 Pointer.
18 - 3.3.4 Stylus.
18 - 3.4 PERFORMANCE.
18 - 3.4.1 General.
19 - 3.4.2 Discrimination.
19 - 3.4.3 Repeatability of Reading.
19 - 3.4.4 Calibration.
20 - APPENDIX A - METHODS OF TEST FOR DIAL GAUGES
20 - A1 GENERAL.
20 - A2 DISCRIMINATION.
20 - A3 HYSTERESIS.
20 - A4 REPEATABILITY.
20 - A5 CALIBRATION.
25 - APPENDIX B - METHODS OF TEST FOR DIAL TEST INDICATORS
25 - B1 GENERAL.
25 - B2 DISCRIMINATION.
25 - B3 HYSTERESIS.
25 - B4 REPEATABILITY.
26 - B5 CALIBRATION.
29 - APPENDIX C - CARE AND USE OF DIAL GAUGES AND DIAL TEST INDICATORS
29 - C1 CARE OF THE INSTRUMENTS.
29 - C2 USE OF THE INSTRUMENT.
30 - C3 CHOICE OF MAGNIFICATION.
30 - C4 CONTACT POINTS.

Specifies dial gauges and dial test indicators used for linear measurement, reading to 0.01 mm and 0.002 mm, and gives requirements for materials, properties, basic design details, accuracy and finish. Appendices describe methods of test for the more important features of the instruments, and give notes on their care and use. Information is also given for calibration requirements for long travel dial gauges. For dial gauges, the Standard is in technical agreement with ISO/R463, but the accuracy and performance requirements have been amplified to show repeatability and discrimination as two separate metrological properties. For dial test indicators the technical requirements are in complete agreement with current ISO/TC3 work.

Committee
ME-027
DocumentType
Standard
ISBN
0 7262 1499 X
Pages
24
ProductNote
Withdrawn 19-12-2019.
PublisherName
Standards Australia
Status
Withdrawn
Supersedes

This standard applies to dial gauges and dial test indicators for linear measurement. It specifies requirements for the more important general dimensions, finish, accuracy, scale graduations, marking and packaging, together with certain design features necessary to ensure convenience in use and repeatability of readings. Notes on methods of testing the more important features of dial gauges and dial test indicators are given in Appendices A and B, and notes on the care and use of these instruments are given in Appendix C.

Under Revision See DR 96368 - DR 96369 (in part)

JIS B 7509:1974 Dial Gauges Reading In 0.001 Mm
JIS B 7503:1997 Dial gauges
AS 1514.1-1980 Glossary of terms used in metrology - General terms and definitions
AS 1004-1971 Surface plates (metric units)
AS 1721-1985 General purpose metric screw threads (Reconfirmed 2017)

AS 4288-2003 Soft underlays for textile floor coverings
AS 4133.0:2019 Methods of testing rocks for engineering purposes General requirements and list of methods
AS 4288-1999 Soft underlays for textile floor coverings
AS 3706.4-2012 Geotextiles - Methods of test Determination of burst strength - California bearing ratio (CBR) - Plunger method (Reconfirmed 2023)
AS 2193-2005 Calibration and classification of force-measuring systems (Reconfirmed 2017)
AS/NZS 4275.2:1995 Methods of testing underground marking tape Tear resistance
AS 1333-1994 Conveyor belting of elastomeric and steel cord construction (Reconfirmed 2019)
AS 2225-1994 Insulating gloves for electrical purposes
AS 3787.1-1997 General requirements for single-use, sterile, plasticized polyvinyl chloride (PVC) packs for human blood - Single blood packs
AS 1289.6.1.3-1998 Methods of testing soils for engineering purposes Soil strength and consolidation tests - Determination of the California Bearing Ratio of a soil - Standard field-in-place method
AS 4133.0-1993 Methods of testing rocks for engineering purposes General requirements and list of methods
AS/NZS 4275.1:1995 Methods of testing underground marking tape Elongation at break
AS/NZS 4347.9:1995 Damp-proof courses and flashings - Methods of test Determining thickness (Reconfirmed 2014)
AS 4133.0-2005 Methods of testing rocks for engineering purposes General requirements and list of methods
AS 3787.2-1997 General requirements for single-use, sterile, plasticized polyvinyl chloride (PVC) packs for human blood - Multiple blood pack systems
AS 3706.4-2001 Geotextiles - Methods of test Determination of burst strength - California bearing ratio (CBR) - Plunger method
AS 4288(INT)-1995 Soft underlays for textile floor coverings
AS 2055.1-1985 PVC sheet floor-covering - Unbacked, flexible
AS 1334.2-1982 Methods of testing conveyor and elevator belting Determination of thickness of belting and rubber covers across the width
SAA/SNZ HB86.2:1998 A guide to the selection, care, calibration and checking of measuring instruments in industry Simple length and angle measuring instruments
AS 2193-2002 Calibration and classification of force-measuring systems
AS 1289.6.1.1-1998 Methods of testing soils for engineering purposes Soil strength and consolidation tests - Determination of the California Bearing Ratio of a soil - Standard laboratory method for a remoulded specimen
AS 2001.2.15-1989 Methods of test for textiles Physical tests - Determination of thickness of textile fabrics
AS/NZS 1869:2012 Hose and hose assemblies for liquefied petroleum gases (LP Gas), natural gas and town gas
AS 2983.6-1987 Methods of test for synthetic sporting surfaces - Determination of resistance to indentation
AS 1889.1-1984 PVC floor tiles - Semi-rigid
AS 1889.2-1985 PVC floor tiles - Flexible
AS 1289.6.1.2-1998 Methods of testing soils for engineering purposes Soil strength and consolidation tests - Determination of the California Bearing Ratio of a soil - Standard laboratory method for an undisturbed specimen
AS/NZS 2111.17:1996 Textile floor coverings - Tests and measurements Determination of thickness, compression and recovery characteristics
AS 3787.2-1992 General requirements for single-use, sterile, plasticized polyvinyl chloride (PVC) blood packs for whole blood and blood components - Multiple blood pack systems
AS 2983.8-1987 Methods of test for synthetic sporting surfaces - Determination of tear resistance

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.