|
AS 60068.2.14-2003
|
Environmental testing Tests - Test N: Change of temperature |
|
AS 2339-1997
|
Traffic signal posts and attachments |
|
AS 1852.881-1988
|
International electrotechnical vocabulary - Radiology and radiological physics |
|
AS 1214-1983
|
Hot-dip galvanized coatings on threaded fasteners (ISO metric coarse thread series) |
|
AS 1275-1985
|
Metric screw threads for fasteners (Reconfirmed 2017) |
|
AS/NZS 61558.2.7:2008
|
Safety of power transformers, power supplies, reactors and similar products Particular requirements and tests for transformers and power supplies for toys (Reconfirmed 2020) |
|
AS/NZS 2053.5:2001
|
Conduits and fittings for electrical installations Corrugated conduits and fittings of insulating material (Reconfirmed 2016) |
|
AS/NZS 2053.4:1995
|
Conduits and fittings for electrical installations Flexible plain conduits and fittings of insulating material (Reconfirmed 2016) |
|
AS/NZS 61558.2.17:2001
|
Safety of power transformers, power supply units and similar Particular requirements for transformers for switch mode power supplies (IEC 61558-2-17:1997, MOD) |
|
AS/NZS 2633:1996
|
Guide to the specification of colours (Reconfirmed 2013) |
|
AS/NZS 61000.6.1:2006
|
Electromagnetic compatibility (EMC) Generic standards - Immunity for residential, commercial and light industrial environments (Reconfirmed 2016) |
|
AS 60068.2.2-2003
|
Environmental testing Tests - Test B: Dry heat (Reconfirmed 2018) |
|
AS/NZS ISO 9001:2008
|
Quality management systems - Requirements |
|
AS/NZS 1390:1997
|
Cup head bolts with ISO metric coarse pitch threads (Reconfirmed 2016) |
|
AS/NZS 1170.2:2011
|
Structural design actions Wind actions (Reconfirmed 2016) |
|
AS 60068.2.30-2003
|
Environmental testing Tests - Test Db and guidance: Damp heat, cyclic (12 + 12-hour cycle) |
|
AS/NZS 61558.2.3:2001
|
Safety of power transformers, power supply units and similar devices Particular requirements for ignition transformers for gas and oil burners (IEC 61558-2-3:1999, IDT) |
|
AS/NZS 2053.6:2001
|
Conduits and fittings for electrical installations Profile-wall, smooth-bore conduits and fittings of insulating material (Reconfirmed 2016) |
|
AS/NZS 61558.1:2008
|
Safety of Power Transformers, Power Supplies, Reactors and Similar Products General requirements and tests (IEC 61558-1 Ed 2, MOD) |
|
AS/NZS 3000:2007
|
Electrical installations (known as the Australian/New Zealand Wiring Rules) |
|
AS/NZS 2053.3:1995
|
Conduits and fittings for electrical installations Rigid plain conduits and fittings of fibre-reinforced concrete material (Reconfirmed 2016) |
|
AS/NZS 2053.2:2001
|
Conduits and fittings for electrical installations Rigid plain conduits and fittings of insulating material (Reconfirmed 2016) |
|
AS 60068.2.5-2003
|
Environmental testing Tests - Test Sa: Simulated solar radiation at ground level |
|
AS/NZS 61558.2.15:2001
|
Safety of power transformers, power supply units and similar Particular requirements for isolating transformers for the supply of medical locations (IEC 61558-2-15:1999, MOD) |
|
AS 60068.2.6-2003
|
Environmental testing Tests - Test Fc: Vibration (sinusoidal) (Reconfirmed 2018) |
|
AS/NZS 1158.1.1:2005
|
Lighting for roads and public spaces Vehicular traffic (Category V) lighting - Performance and design requirements |
|
AS/NZS 2053.8:1995
|
Conduits and fittings for electrical installations Flexible conduits and fittings of metal or composite material (Reconfirmed 2016) |
|
AS/NZS 1170.2:2002
|
Structural design actions Wind actions |
|
AS 60529-2004
|
Degrees of protection provided by enclosures (IP Code) (Reconfirmed 2018) |
|
AS/NZS 3123:2005
|
Approval and test specification - Plugs, socket-outlets and couplers for general industrial application (Reconfirmed 2016) |
|
AS/NZS 61558.2.5:2003
|
Safety of power transformers, power supply units and similar Particular requirements for shaver transformers (IEC 61558-2-5:1997, MOD) |
|
AS/NZS 2053.1:2001
|
Conduits and fittings for electrical installations General requirements (Reconfirmed 2016) |
|
AS/NZS 2053.7:2002
|
Conduits and fittings for electrical installations Rigid metal conduits and fittings (Reconfirmed 2016) |
|
AS/NZS 61558.2.8:2001
|
Safety of power transformers, power supply units and similar Particular requirements for bell and chime transformers (IEC 61558-2-8:1998, IDT) |
|
AS/NZS 61558.1:2000
|
Safety of power transformers, power supply units and similar General requirements and tests (IEC 61558-1 Ed 1.1, MOD) |
|
AS 1742.14:2014
|
Manual of uniform traffic control devices Traffic signals |
|
AS/NZS 1158.3.1:2005
|
Lighting for roads and public spaces Pedestrian area (Category P) lighting - Performance and design requirements |
|
AS/NZS 61558.2.9:2003
|
Safety of power transformers, power supply units and similar products Particular requirements for transformers for class III handlamps for tungsten filament lamps (IEC 61558-2-9:2002, MOD) |
|
AS/NZS 61558.2.23:2001
|
Safety of power transformers, power supply units and similar devices Particular requirements for transformers for construction sites (IEC 61558-2-23:2000, MOD) |
|
AS/NZS 3100:2009
|
Approval and test specification - General requirements for electrical equipment |
|
AS/NZS 5000.1:2005
|
Electric cables - Polymeric insulated For working voltages up to and including 0.6/1 (1.2) kV (Reconfirmed 2017) |