AS 2243.5-1993
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Safety in laboratories Non-ionizing radiations
Hardcopy , PDF 1 User , PDF 3 Users , PDF 5 Users , PDF 9 Users
24-05-2024
01-01-1993
Provides requirements and recommendations to prevent accidents in laboratories when using equipment generating non-ionizing radiations.
Committee |
CH-026
|
DocumentType |
Standard
|
ISBN |
0 7262 8092 5
|
Pages |
34
|
PublisherName |
Standards Australia
|
Status |
Superseded
|
SupersededBy | |
Supersedes | |
UnderRevision |
This Standard deals with many of the non-ionizing radiations and associated hazards encountered in laboratories. Although the Standard specifies requirements and gives recommendations to prevent personal injury caused by these radiations, or by other hazards associated with their use, it does not contain all the relevant information dealing with usage and safety requirements for non-ionizing radiations and reference should also be made to other appropriate documents.NOTES:1 Appendix A provides a schematic arrangement of the non-ionizing electromagnetic spectrum.2 Appendix B provides advisory material dealing with optical fibre systems.3 Appendix C provides a listing of documents giving other information on non-ionizing radiations.
First published as AS 2243.5-1980.
Second edition 1993.
AS 2659.2-1983 | Guide to the use of sound measuring equipment - Portable equipment for integration of sound signals |
AS 2604-1986 | Sunscreen products - Evaluation and classification |
AS 1259.2-1990 | Acoustics - Sound level meters Integrating - Averaging |
AS 1633-1985 | Acoustics - Glossary of terms and related symbols |
AS 2659.1-1988 | Guide to the use of sound measuring equipment - Portable sound level meters |
AS 1269-1989 | Acoustics - Hearing conservation |
AS 1319-1994 | Safety signs for the occupational environment (Reconfirmed 2018) |
AS 1216.1-1984 | Classification, hazard identification and information systems for dangerous goods - Classification and class labels for dangerous goods |
AS 1885.1-1990 | Measurement of occupational health and safety performance Describing and reporting occupational injuries and disease, known as the Workplace injury and disease recording standard |
AS 1067.1-1990 | Sunglasses and fashion spectacles Safety requirements |
AS 2772.1-1990 | Radiofrequency radiation Maximum exposure levels - 100 kHz to 300 GHz |
AS 1259.1-1990 | Acoustics - Sound level meters Non-integrating |
AS 2107-1987 | Acoustics - Recommended design sound levels and reverberation times for building interiors |
AS 2211-1991 | Laser safety |
AS 1336-1982 | Recommended practices for eye protection in the industrial environment |
AS 1270-1988 | Acoustics - Hearing protectors |
AS 1067.2-1990 | Sunglasses and fashion spectacles Performance requirements |
AS 2397-1993 | Safe use of lasers in the building and construction industry |
AS 1038.8.2-2003 | Coal and coke - Analysis and testing Coal and coke - Chlorine - High-temperature combustion method (Reconfirmed 2013) |
AS 2879.2-2003 | Alumina - Determination of particles passing a 20 micrometre aperture sieve |
AS 3641.2-1990 | Recommended practice for atomic emission spectrometric analysis - Inductively coupled plasma excitation |
AS 2434.6-2002 | Methods for the analysis and testing of lower rank coal and its chars Lower rank coal - Ultimate analysis - Classical methods (Reconfirmed 2013) (Reconfirmed 2023) |
AS 1774.4.1-2002 | Refractories and refractory materials - Physical test methods Preparation of test pieces - By casting |
AS/NZS 1269.1:1998 | Occupational noise management - Measurement and assessment of noise immission and exposure |
AS 3685-1998 | Recommended procedures and principles of glow discharge mass spectrometry (GD-MS) (Reconfirmed 2016) |
AS 1774.13-2000 | Refractories and refractory materials - Physical test methods Permanent dimensional change (Reconfirmed 2013) |
AS 1038.11-2002 | Coal and coke - Analysis and testing Coal - Forms of sulfur (Reconfirmed 2013) |
AS 1774.33-2003 | Refractories and refractory materials - Physical test methods Determination of the setting time of castables |
AS 1038.14.2-2003 | Coal and coke - Analysis and testing Higher rank coal ash and coke ash - Major and minor elements - Acid digestion/flame atomic absorption spectrometric method (Reconfirmed 2013) |
AS 1774.34-2004 | Refractories and refractory materials - Physical test methods Guide to the determination of extrusion pressure and curing time of taphole clay |
AS 1774.12-2001 | Refractories and refractory materials - Physical test methods Refractoriness under load - Temperatures of deformation at constant load with rising temperature (Reconfirmed 2013) |
AS/NZS 2243.1:1997 | Safety in laboratories General |
AS 1038.25-2002 | Coal and coke - Analysis and testing Coal - Durham cone handleability test (Reconfirmed 2013) (Reconfirmed 2023) |
AS 2434.8-2002 | Methods for the analysis and testing of lower rank coal and its chars Lower rank coal - Determination of ash (Reconfirmed 2013) (Reconfirmed 2023) |
AS 1774.19-2003 | Refractories and refractory materials - Physical test methods The determination of sieve analysis and moisture content (Reconfirmed 2013) |
AS 1038.21.1.2-2002 | Coal and coke - Analysis and testing Higher rank coal and coke - Relative density - Analysis sample/volumetric method (Reconfirmed 2013) (Reconfirmed 2023) |
AS 1774.5-2001 | Refractories and refractory materials - Physical test methods The determination of density, porosity and water absorption (Reconfirmed 2013) |
AS 1774.4.5-2002 | Refractories and refractory materials - Physical test methods Preparation of test pieces - Gunning refractories (Reconfirmed 2013) |
AS 1038.10.1-2003 | Coal and coke - Analysis and testing Determination of trace elements - Coal, coke and fly-ash - Determination of eleven trace elements - Flame atomic absorption spectrometric method (Reconfirmed 2013) |
AS 1038.6.3.2-2003 | Coal and coke - Analysis and testing Higher rank coal and coke - Ultimate analysis - Total sulfur - High-temperature combustion method (Reconfirmed 2013) |
AS 2773.1-1998 | Ultrasonic cleaners for health care facilities Non-portable |
AS 5006.2-2002 | Silver and silver bearing alloys - Determination of silver content (1% to 99%) - Gravimetric (fire assay) method |
AS 1038.21.1.1-2002 | Coal and coke - Analysis and testing Higher rank coal and coke - Relative density - Analysis sample/density bottle method |
AS 2434.3-2002 | Methods for the analysis and testing of lower rank coal and its chars Lower rank coal - Determination of the moisture holding capacity (Reconfirmed 2013) (Reconfirmed 2023) |
AS 1774.23.1-2001 | Refractories and refractory materials - Physical test methods Abradability index - Oblique method |
AS 1774.2-2001 | Refractories and refractory materials - Physical test methods Determination of bulk density of granular materials (Reconfirmed 2013) |
AS 4538.2-2000 | Guide to sampling of alumina Preparation of samples (Reconfirmed 2013) |
AS 5006.1-2002 | Silver and silver bearing alloys Determination of silver content (0.1% to 99.9%) - Tritrimetric (potentiometric) method (Reconfirmed 2016) |
AS 1774.9-2000 | |
AS 2434.2-2002 | Methods for the analysis and testing of lower rank coal and its chars Lower rank coal - Determination of volatile matter (Reconfirmed 2013) |
AS 2489.11-2003 | Methods for the analysis of zircon sand concentrates Determination of acid demand value |
AS 2864.1-2003 | Methods for the analysis of rutile Determination of titanium content - Titrimetric method |
AS 1774.31.2-2001 | Refractories and refractory materials - Physical test methods Modulus of elasticity - Compression method (Reconfirmed 2013) |
AS 2879.4-2003 | Alumina - Determination of specific surface area by nitrogen adsorption |
AS 1774.22-2000 | Refractories and refractory materials - Physical test methods Refractory mortar - Test methods |
AS 1774.27-2001 | Refractories and refractory materials - Physical test methods Modulus of rupture at elevated temperatures |
AS 1038.12.3-2002 | Coal and coke - Analysis and testing Higher rank coal - Caking and coking properties - Dilatation |
AS/NZS 2982.1:1997 | Laboratory design and construction General requirements |
AS 1774.32-2002 | Refractories and refractory materials - Physical test methods Refractory products containing carbon - Test methods (Reconfirmed 2013) |
AS 1038.14.1-2003 | Coal and coke - Analysis and testing Higher rank coal ash and coke ash - Major and minor elements - Borate fusion/flame atomic absorption spectrometric method (Reconfirmed 2013) |
AS 2434.5-2002 | Methods for the analysis and testing of lower rank coal and its chars Lower rank coal and its chars - Determination of moisture in bulk samples of lower rank coal and in analysis samples of char (Reconfirmed 2013) (Reconfirmed 2023) |
AS 2715-2003 | Heavy mineral sand concentrates - Determination of pH value |
AS 1038.23-2002 | Coal and coke - Analysis and testing Higher rank coal and coke - Carbonate carbon (Reconfirmed 2013) |
AS 1774.31.1-2000 | Refractories and refractory materials - Physical test methods Modulus of elasticity - Flexural method (Reconfirmed 2013) |
AS 1038.17-2000 | Coal and coke - Analysis and testing Higher rank coal - Moisture-holding capacity (equilibrium moisture) (Reconfirmed 2013) |
AS 2879.10-2003 | Alumina - Determination of attrition index |
AS 3515.2-2002 | Gold and gold bearing alloys - Determination of gold content 30% to 99.5% - Gravimetric (fire assay) method |
AS 1038.22-1992 | Coal and coke - Analysis and testing Higher rank coal - Mineral matter and water of constitution |
AS 1038.1-2001 | Coal and coke - Analysis and testing Higher rank coal - Total moisture |
AS 1038.10.5.1-2003 | Coal and coke - Analysis and testing Coal, coke and fly-ash - Trace elements - Determination of mercury content - Tube combustion method (Reconfirmed 2013) (Reconfirmed 2023) |
AS 2434.7-2002 | Methods for the analysis and testing of lower rank coal and its chars Lower rank coal - Determination of moisture in the analysis sample (Reconfirmed 2013) (Reconfirmed 2023) |
AS 1774.7-2001 | Refractories and refractory materials - Physical test methods Permeability to gases |
AS 1038.12.1-2002 | Coal and coke - Analysis and testing Higher rank coal - Caking and coking properties - Crucible swelling number |
AS 2503.5-2003 | Refractories and refractory materials - Chemical analysis Chrome-bearing materials |
AS 1774.1-2000 | Refractories and refractory materials - Physical test methods Determination of cold compressive strength (Reconfirmed 2013) |
AS 2879.9-2002 | Alumina Determination of flow time (Reconfirmed 2013) |
AS 2489.5-2003 | Methods for the analysis of zircon sand concentrates Determination of zirconium plus hafnium content (Gravimetric method) |
AS 2434.4-2002 | Methods for the analysis and testing of lower rank coal and its chars Dried lower rank coal and its chars - Determination of apparent density - Mercury displacement method (Reconfirmed 2013) (Reconfirmed 2023) |
AS 2879.1-2000 | Alumina - Determination of loss of mass at 300 degrees Celsius and 1000 degrees Celsius |
AS 1774.3-2000 | Refractories and refractory materials - Physical test methods Determination of cold modulus of rupture (Reconfirmed 2013) |
AS 1774.4.4-2001 | Refractories and refractory materials - Physical test methods Preparation of test pieces - Mouldable refractories |
AS 2879.8-2000 | Alumina Determination of bulk density (Reconfirmed 2013) |
AS 2434.9-2000 | Method for the analysis and testing of lower rank coal and its chars Determination of four acid-extractable inorganic ions in lower rank coal (Reconfirmed 2013) (Reconfirmed 2023) |
AS 1038.10.4-2001 | Coal and coke - Analysis and testing Determination of trace elements - Coal, coke and fly-ash - Determination of fluorine content - Pyrohydrolysis method (Reconfirmed 2013) |
Please Login or Create an Account so you can add users to your Multi user PDF Later.
Important note : Users cannot be edited or removed once added to your Multi user PDF.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.