AS 2331.1.4-2001
Current
The latest, up-to-date edition.
Methods of test for metallic and related coatings Local thickness tests - Magnetic induction and eddy current methods
Hardcopy , PDF 1 User , PDF 3 Users , PDF 5 Users , PDF 9 Users
English
17-07-2001
Important note : Users cannot be edited or removed once added to your Multi user PDF.
Specifies requirements for two methods of local thickness testing. The magnetic induction method is suitable for the measurement of thickness of gold, silver, tin, cadmium, lead and organic coatings on magnetic substrates. The eddy current method is suitable for measurement of thickness of anodic coatings and organic coatings on aluminium.
| Committee |
MT-009
|
| DocumentType |
Standard
|
| ISBN |
0 7337 3942 3
|
| Pages |
7
|
| ProductNote |
Reconfirmed 07/04/2017.This standard has been reconfirmed in Australia in 2017 and remains current in New Zealand. Reconfirmation Notice 07/04/2017
|
| PublisherName |
Standards Australia
|
| Status |
Current
|
| Supersedes |
This Standard sets out the requirements for the following non-destructive methods for the measurement of the local thickness of metallic and non-metallic coatings:(a) Magnetic induction (low frequency) methodThe magnetic induction method is used for the thickness testing of non-magnetic and non-metallic coatings on magnetic substrates.(b) Eddy current (high performance) methodThe eddy current method is used for the thickness testing of —(i) a non-conductive coating on a non-magnetic substrate; and(ii) a metallic coating or a non-metallic coating on a substrate that has appreciably different conductivity.These methods apply when the coating thickness is not less than 2 mm, and the surface contour permits calibration of the test instrument.The magnetic induction (low frequency) method is suitable for the measurement of thickness of gold, silver, tin, cadmium, zinc, copper, chromium, lead and organic coatings, such as paints and plastics, on magnetic substrates.The eddy current (high frequency) method is suitable for the measurement of thickness of oxide coatings on metals. Using selected frequencies, it is also possible to measure the thickness of various metallic coatings on either magnetic or non-magnetic substrates, e.g. tin-lead on copper, silver on nickel/silver, copper, zinc, cadmium or tin on steel, and copper or silver on a non-metallic base.Under the best conditions of use, these methods are accurate to ±0.7 mm, or ±10%, whichever is the greater.NOTES: 1 Factors affecting the accuracy of measurement are given in Appendix A.2 The methods given in this Standard are not suitable for the measurement of chemical conversion coatings.
Originated as part of AS K173.2-1971.
Previous edition AS 2331.1.4-1982.
Second edition 2001.
| AS 2331.2.1-1980 | Methods of test for metallic and related coatings - Dissolution methods - Strip and weigh, and analytical Average thickness tests |
| AS 2331.2.1-2001 | Methods of test for metallic and related coatings Tests for average coating mass per unit area or for thickness - Dissolution methods - Strip and weigh, and analytical |
| AS 2331.1.1-2001 | Methods of test for metallic and related coatings Local thickness tests - Micrographic examination of cross-sections |
| AS 2699.2:2020 | Built-in components for masonry construction Connectors and accessories |
| AS 1580.452.1-2003 | Paints and related materials - Methods of test Resistance to humidity under condensation conditions |
| AS/NZS 4534:2006 | Zinc and zinc/aluminium-alloy coatings on steel wire (Reconfirmed 2017) |
| AS/NZS 4791:2006 | Hot-dip galvanized (zinc) coatings on ferrous open sections, applied by an in-line process (Reconfirmed 2017) |
| AS 5100.8:2017 | Bridge design Rehabilitation and strengthening of existing bridges |
| AS 2331.2.1-2001 | Methods of test for metallic and related coatings Tests for average coating mass per unit area or for thickness - Dissolution methods - Strip and weigh, and analytical |
| AS 2699.1:2020 | Built-in components for masonry construction Wall ties |
| AS/NZS 4680:2006 | Hot-dip galvanized (zinc) coatings on fabricated ferrous articles (Reconfirmed 2017) |
| AS 2699.3:2020 | Built-in components for masonry construction Lintels and shelf angles (durability requirements) |
| AS/NZS 4792:2006 | Hot-dip galvanized (zinc) coatings on ferrous hollow sections, applied by a continuous or a specialized process (Reconfirmed 2017) |
| AS 4750-2003 | Electrogalvanized (zinc) coatings on ferrous hollow and open sections (Reconfirmed 2017) |
| AS 3715-2002 | Metal finishing - Thermoset powder coatings for architectural applications of aluminium and aluminium alloys |
| AS/NZS 5131:2016 | Structural steelwork - Fabrication and erection |
| AS 2331.1.3-2001 | Methods of test for metallic and related coatings Local thickness tests - Magnetic method (Reconfirmed 2017) |
| AS 3566.2-2002 | Self-drilling screws for the building and construction industries - Corrosion resistance requirements |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.