• Shopping Cart
    There are no items in your cart

AS 2780-1999

Superseded

Superseded

A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

View Superseded by

Refractories and refractory materials - Glossary of terms

Available format(s)

Hardcopy , PDF 1 User , PDF 3 Users , PDF 5 Users , PDF 9 Users

Superseded date

30-06-2017

Superseded by

AS 2780-2003

Language(s)

English

Published date

01-01-1999

€126.44
Excluding VAT

1 - AS 2780-1999 REFRACTORIES AND REFRACTORY MATERIALS - GLOSSARY OF TERMS
4 - PREFACE
6 - TERMS AND DEFINITIONS
102 - APPENDIX A - REFERENCED DOCUMENTS

Sets out a glossary of terms used in the refractories industry.

Committee
MN-007
DocumentType
Standard
ISBN
0 7337 2532 5
Pages
97
PublisherName
Standards Australia
Status
Superseded
SupersededBy
Supersedes
UnderRevision

First published as AS R27-1965 (being endorsement of BS 3446-1962 with amendments).
Second edition 1970.
Revised and redesignated AS 2780-1985.
Second edition 1999.

AS 1774.3-1992 Refractories and refractory materials - Physical test methods Determination of cold modulus of rupture
AS 1774.24-1997 Refractories and refractory materials - Physical test methods Resistance to thermal shock
AS 1774.4.2-1992 Refractories and refractory materials - Physical test methods Preparation of test pieces - Low-cement castable refractories
AS 1774.1-1991 Refractories and refractory materials - Physical test methods Determination of cold compressive strength
AS 1617.1-1993 Refractory bricks and shapes Fireclay
AS 1774.7-1991 Refractories and refractory materials - Physical test methods Determination of permeability to gases
AS 2497-1981 Sampling procedures for acceptance testing of shaped refractory products
AS 1774.19-1978 Refractories and refractory materials - Physical test methods The determination of sieve analysis and water content
AS 1228-1997 Pressure equipment - Boilers
AS 1774.11-1996 Refractories and refractory materials - Physical test methods Thermal expansion
AS 1774.9-1992 Refractories and refractory materials - Physical test methods Determination of resistance to the disintegrating effect of carbon monoxide
AS 1774.4.1-1990 Refractories and refractory materials - Physical test methods Preparation of test pieces - Castable refractories
AS 1774.21-1996 Refractories and refractory materials - Physical test methods Mouldable refractories - Workability index
AS 1774.28-1998 Refractories and refractory materials - Physical test methods Ceramic fibre products - Test methods
AS 1774.6-1992 Refractories and refractory materials - Physical test methods Determination of true density
AS 1774.12-1983 Refractories and refractory materials - Physical test methods Refractoriness under load - Temperatures of deformation at constant load with rising temperature
AS 1774.27-1992 Refractories and refractory materials - Physical test methods Modulus of rupture at elevated temperatures
AS 1774.2-1991 Refractories and refractory materials - Physical test methods Determination of bulk density of granular materials
AS 2913-1987 Evaporative air-conditioning equipment
AS 1774.10-1994 Refractories and refractory materials - Physical test methods Pyrometric cone equivalent (refractoriness)
AS 1774.13-1989 Refractories and refractory materials - Physical test methods Permanent dimensional change
AS 1774.25-1998 Refractories and refractory materials - Physical test methods Determination of density by the Rees-Hugill method (Reconfirmed 2013)
AS 1774.5-1989 Refractories and refractory materials - Physical test methods The determination of density, porosity and water absorption

AS 1774.6-1992 Refractories and refractory materials - Physical test methods Determination of true density
AS 2497.1-2001 Procedures for acceptance testing of refractory products Batch procedure (Reconfirmed 2013)
AS 1774.9-1992 Refractories and refractory materials - Physical test methods Determination of resistance to the disintegrating effect of carbon monoxide
AS 1774.28-1998 Refractories and refractory materials - Physical test methods Ceramic fibre products - Test methods
AS 1617.1-2003 Refractory bricks and shapes Fireclay
AS 1774.4.1-2002 Refractories and refractory materials - Physical test methods Preparation of test pieces - By casting
AS 1774.11-1996 Refractories and refractory materials - Physical test methods Thermal expansion
AS 1617.4-2003 Refractory bricks and shapes Silica (Reconfirmed 2013)
AS 1774.13-2000 Refractories and refractory materials - Physical test methods Permanent dimensional change (Reconfirmed 2013)
AS 1774.23.1-1992 Refractories and refractory materials - Physical test methods Abradability index - Oblique method
AS 1774.33-2003 Refractories and refractory materials - Physical test methods Determination of the setting time of castables
AS 1774.14-1992 Refractories and refractory materials - Physical test methods Thermal conductivity
AS 1774.4.5-1994 Refractories and refractory materials - Physical test methods Preparation of test pieces - Gunning refractories
AS 4045.2-1995 Prepared unshaped refractory materials - Insulating
AS 1774.12-2001 Refractories and refractory materials - Physical test methods Refractoriness under load - Temperatures of deformation at constant load with rising temperature (Reconfirmed 2013)
AS 1774.3-1992 Refractories and refractory materials - Physical test methods Determination of cold modulus of rupture
AS 4359.2-1998 Insulating refractory ceramic fibres Board
AS 1774.19-2003 Refractories and refractory materials - Physical test methods The determination of sieve analysis and moisture content (Reconfirmed 2013)
AS 1617.3-2003 Refractory bricks and shapes High alumina (Reconfirmed 2013)
AS 1774.5-2001 Refractories and refractory materials - Physical test methods The determination of density, porosity and water absorption (Reconfirmed 2013)
AS 1774.25-1992 Refractories and refractory materials - Physical test methods Determination of density by the Rees-Hugill method
AS 1774.4.5-2002 Refractories and refractory materials - Physical test methods Preparation of test pieces - Gunning refractories (Reconfirmed 2013)
AS 1774.29-1995 Refractories and refractory materials - Physical test methods Cast coverage
AS 1774.30-1998 Refractories and refractory materials - Physical test methods Drying and firing schedules
AS 1774.23.1-2001 Refractories and refractory materials - Physical test methods Abradability index - Oblique method
AS 1774.26-1995 Refractories and refractory materials - Physical test methods Creep in compression - Deformation under constant load and constant temperature
AS 1774.2-2001 Refractories and refractory materials - Physical test methods Determination of bulk density of granular materials (Reconfirmed 2013)
AS 1774.9-2000
AS 1617.5-1993 Refractory bricks and shapes Magnesite, chrome
AS 2503.2-1996 Refractories and refractory materials - Chemical analysis - Aluminosilicate refractories
AS 1774.31.2-2001 Refractories and refractory materials - Physical test methods Modulus of elasticity - Compression method (Reconfirmed 2013)
AS 4045.1-1993 Prepared unshaped refractory materials - Dense
AS 1774.22-2000 Refractories and refractory materials - Physical test methods Refractory mortar - Test methods
AS 1774.27-2001 Refractories and refractory materials - Physical test methods Modulus of rupture at elevated temperatures
AS 1617.2-2003 Refractory bricks and shapes Insulating
AS 1774.32-2002 Refractories and refractory materials - Physical test methods Refractory products containing carbon - Test methods (Reconfirmed 2013)
AS 1774.24-1997 Refractories and refractory materials - Physical test methods Resistance to thermal shock
AS 1774.1-1991 Refractories and refractory materials - Physical test methods Determination of cold compressive strength
AS 1774.31.1-2000 Refractories and refractory materials - Physical test methods Modulus of elasticity - Flexural method (Reconfirmed 2013)
AS 1774.23.2-1999 Refractories and refractory materials - Physical test methods Abradability index - Perpendicular method (Reconfirmed 2013)
AS 1774.10-1994 Refractories and refractory materials - Physical test methods Pyrometric cone equivalent (refractoriness)
AS 1617.3-1993 Refractory bricks and shapes High alumina
AS 1774.4.4-1992 Refractories and refractory materials - Physical test methods Preparation of test pieces - Mouldable refractories
AS 1617.4-1993 Refractory bricks and shapes Silica
AS 1618-1993 Dimensions and preferred sizes for refractory bricks
AS 1617.5-2003 Refractory bricks and shapes Magnesite, chrome
AS 1617.1-1993 Refractory bricks and shapes Fireclay
AS 1774.7-2001 Refractories and refractory materials - Physical test methods Permeability to gases
AS 1774.4.2-1992 Refractories and refractory materials - Physical test methods Preparation of test pieces - Low-cement castable refractories
AS 4045.1-2003 Prepared unshaped refractory materials Dense (Reconfirmed 2013)
AS 1774.4.3-1998 Refractories and refractory materials - Physical test methods Preparation of test pieces - Unshaped refractories on site
AS 2503.1-1996 Refractories and refractory materials - Chemical analysis - Silica refractories
AS 4359.1-1996 Insulating refractory ceramic fibres Bulk fibre and blankets (Reconfirmed 2013)
AS 1774.1-2000 Refractories and refractory materials - Physical test methods Determination of cold compressive strength (Reconfirmed 2013)
AS 1774.27-1992 Refractories and refractory materials - Physical test methods Modulus of rupture at elevated temperatures
AS 1774.3-2000 Refractories and refractory materials - Physical test methods Determination of cold modulus of rupture (Reconfirmed 2013)
AS 1774.21-1996 Refractories and refractory materials - Physical test methods Mouldable refractories - Workability index
AS 1774.4.4-2001 Refractories and refractory materials - Physical test methods Preparation of test pieces - Mouldable refractories
AS 1618-2003 Dimensions and preferred sizes for refractory bricks
AS 1774.25-1998 Refractories and refractory materials - Physical test methods Determination of density by the Rees-Hugill method (Reconfirmed 2013)
AS 1617.2-1993 Refractory bricks and shapes Insulating

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.