AS 3577-2006
Current
The latest, up-to-date edition.
Steel cylinders for compressed gases - Welded - 150 kg to 500 kg
Hardcopy , PDF 1 User , PDF 3 Users , PDF 5 Users , PDF 9 Users
English
06-11-2006
Important note : Users cannot be edited or removed once added to your Multi user PDF.Specifies the requirements for welded carbon and stainless steel cylinders with one longitudinal joint, and two circumferential joints, of water capacity not less than 150kg nor more than 500kg.
| Committee |
ME-002
|
| DocumentType |
Standard
|
| ISBN |
0 7337 7834 8
|
| Pages |
26
|
| ProductNote |
Reconfirmed 07/07/2017.This standard has been reconfirmed in Australia in 2017 and remains current in New Zealand. Reconfirmation Notice 07/07/2017
|
| PublisherName |
Standards Australia
|
| Status |
Current
|
| Supersedes |
This Standard specifies requirements for welded carbon and stainless steel cylinders with one longitudinal joint, and two circumferential joints, of water capacity not less than 150 kg nor more than 500 kg, which have test pressures from 1750 kPa to 7000 kPa, and are intended for the storage and transport of compressed gases in accordance with AS 2030.1.NOTES:1 A gas cylinder manufactured by welding but which includes any brazing of or on the pressure-retaining portions is for the purpose of this Standard considered to be a brazed gas cylinder.2 Other Australian Standards for brazed and welded gas cylinders are AS 2469 and AS 2470.3 Appendix A lists the suggested minimum information that should be supplied by the purchaser when ordering gas cylinders to this Standard.
Originated as AS B15-1950.
Previous edition AS 3577-1999.
Third edition 2006.
| AS 1796-2001 | Certification of welders and welding supervisors (Reconfirmed 2016) |
| AS 2469-2005 | Steel cylinders for compressed gases - Welded two-piece construction - 0.1 kg to 150 kg |
| AS 2205.3.4-2003 | Methods for destructive testing of welds in metal Transverse joggle-butt wrap-around bend test |
| AS 2205.3.1-2003 | Methods for destructive testing of welds in metal Transverse guided bend test (Reconfirmed 2018) |
| AS 2812-2005 | Welding, brazing and cutting of metals - Glossary of terms (Reconfirmed 2018) |
| AS 2205.2.1-2003 | Methods for destructive testing of welds in metal Transverse butt tensile test |
| AS 4037-1999 | Pressure equipment - Examination and testing (Reconfirmed 2016) |
| AS 2030.1-1999 | The verification, filling, inspection, testing and maintenance of cylinders for storage and transport of compressed gases Cylinders for compressed gases other than acetylene |
| AS/NZS 3992:1998 | Pressure equipment - Welding and brazing qualification |
| AS/NZS 4680:2006 | Hot-dip galvanized (zinc) coatings on fabricated ferrous articles (Reconfirmed 2017) |
| AS 1627.4-2005 | Metal finishing - Preparation and pretreatment of surfaces Abrasive blast cleaning of steel (Reconfirmed 2017) |
| AS 1210 SUPP 1-1990 | |
| AS 1722.1-1975 | Pipe threads of Whitworth form Sealing pipe threads (metric units) |
| AS 1391-2007 | Metallic materials - Tensile testing at ambient temperature (Reconfirmed 2017) |
| AS 2205.2.3-2003 | Methods for destructive testing of welds in metal Transverse joggle-butt tensile test |
| AS 1210-1997 | Pressure vessels |
| AS 2470-2005 | Steel cylinders for compressed gases - Welded three-piece construction with longitudinal joint - 11 kg to 150 kg (Reconfirmed 2016) |
| AS 1210 SUPP 2-1999 | Pressure vessels - Cold-stretched austenitic stainless steel vessels (Supplement to AS 1210-1997) |
| AS/NZS 1594:2002 | Hot-rolled steel flat products (Reconfirmed 2016) |
| AS 2177-2006 | Non-destructive testing - Radiography of welded butt joints in metal (Reconfirmed 2016) |
| AS/NZS 3750.15:1998 | Paints for steel structures Inorganic zinc silicate paint (Reconfirmed 2013) |
| AS/NZS 3750.9:1994 | Paints for steel structures - Organic zinc-rich primer |
| AS 2337.1-2004 | Gas cylinder test stations General requirements, inspection and tests - Gas cylinders |
| AS 3635-1990 | Unified (ISO inch) screw threads, associated gauges, and gauging practice (Reconfirmed 2017) |
| AS 1721-1985 | General purpose metric screw threads (Reconfirmed 2017) |
| AS 2038-1977 | Methods for detecting the susceptibility of austenitic stainless steels to intergranular corrosion |
| AS 1391-2005 | Metallic materials - Tensile testing at ambient temperature |
| AS 1722.2-1992 | Pipe threads of Whitworth form Fastening pipe threads (Reconfirmed 2017) |
| AS 2470-2005 | Steel cylinders for compressed gases - Welded three-piece construction with longitudinal joint - 11 kg to 150 kg (Reconfirmed 2016) |
| AS 2469-2005 | Steel cylinders for compressed gases - Welded two-piece construction - 0.1 kg to 150 kg |
| AS 2468-1989 | Steel cylinders for compressed gases - Brazed - 0.1 kg to 11 kg |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.