• Shopping Cart
    There are no items in your cart

AS 3660.1-2000

Superseded

Superseded

A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

View Superseded by

Termite management New building work

Available format(s)

Hardcopy , PDF 1 User , PDF 3 Users , PDF 5 Users , PDF 9 Users

Superseded date

22-10-2024

Superseded by

AS 3660.1:2014

Language(s)

English

Published date

11-12-2000

€126.44
Excluding VAT

1 - AS 3660.1-2000 TERMITE MANAGEMENT - NEW BUILDING WORK
4 - PREFACE
5 - CONTENTS
7 - FOREWORD
8 - SECTION 1 SCOPE AND APPLICATION
8 - 1.1 SCOPE
9 - 1.2 APPLICATION
9 - 1.2.1 General
9 - 1.2.2 Building Code of Australia
9 - 1.3 UNSPECIFIED SYSTEMS AND MATERIALS
9 - 1.4 INTERFACE BETWEEN NEW AND EXISTING WORK
9 - 1.5 CONSTRUCTION AT OR NEAR BOUNDARY
10 - 1.6 REFERENCED DOCUMENTS
10 - 1.7 DEFINITIONS
10 - 1.7.1 Bridging
11 - 1.7.2 Breaching
11 - 1.7.3 Parging
11 - 1.7.4 Perimeter Barrier
11 - 1.7.5 Termite resistant
11 - 1.7.6 Inspection zone
12 - SECTION 2 PERFORMANCE CRITERIA
12 - 2.1 SCOPE OF SECTION
12 - 2.2 GENERAL
12 - 2.2.1 Barrier systems
12 - 2.2.2 Attachments to buildings
12 - 2.2.3 Bridging and breaching of termite barrier systems
12 - 2.3 SPECIFIC
12 - 2.3.1 Concrete slabs as termite barriers
12 - 2.3.2 Sheet material barriers
12 - 2.3.3 Graded particle barriers
12 - 2.3.4 Chemical barriers
14 - SECTION 3 DEEMED-TO-SATISFY REQUIREMENTS-GENERAL
14 - 3.1 SCOPE OF SECTION
14 - 3.2 BUILDING SITE MANAGEMENT
14 - 3.3 STRUCTURAL ELEMENTS BELOW TERMITE BARRIERS
15 - 3.4 MIXED CONSTRUCTION
15 - 3.5 ATTACHMENTS TO BUILDINGS
15 - 3.6 BRIDGING AND BREACHING
15 - 3.7 REQUIREMENTS FOR SUSPENDED FLOORS
15 - 3.7.1 General
15 - 3.7.2 Access for visual inspection
15 - 3.7.3 Clearance from masonry components
15 - 3.7.4 Drainage
16 - 3.8 DOCUMENTATION
17 - SECTION 4 DEEMED-TO-SATISFY REQUIREMENTS-CONCRETE SLABS
17 - 4.1 SCOPE OF SECTION
17 - 4.2 GENERAL
17 - 4.3 SLAB-ON-GROUND
17 - 4.3.1 General
17 - 4.3.2 Joints and penetrations
19 - 4.4 SLAB EDGE EXPOSURE
20 - 4.5 SUSPENDED SLABS
20 - 4.5.1 Design and construction
20 - 4.5.2 Penetrations and joints
21 - SECTION 5 DEEMED-TO-SATISFY REQUIREMENTS-SHEET MATERIALS
21 - 5.1 SCOPE OF SECTION
21 - 5.2 GENERAL
21 - 5.3 MATERIAL REQUIREMENTS
21 - 5.4 FABRICATION OF METAL SHIELDS
21 - 5.4.1 Sheet metal shields
22 - 5.4.2 Woven stainless steel mesh shields
23 - 5.5 INSTALLATION OF SHIELDING
23 - 5.5.1 General
24 - 5.5.2 External walls
24 - 5.5.3 Internal substructure walls
24 - 5.6 SPECIFIC CONSTRUCTION DETAILS
24 - 5.6.1 Changes in floor levels
27 - 5.6.2 Isolated piers, posts and stumps
27 - 5.6.3 Anchorage
28 - 5.6.4 Service pipes and similar connections
28 - 5.6.5 Attachments and other structures
29 - SECTION 6 DEEMED-TO-SATISFY REQUIREMENTS-WOVEN STAINLESS STEEL MESH
29 - 6.1 SCOPE OF SECTION
29 - 6.2 GENERAL
29 - 6.3 MATERIAL REQUIREMENTS
29 - 6.3.1 Woven stainless steel mesh
29 - 6.3.2 Parging material
29 - 6.3.3 Electrolytic corrosion
30 - 6.4 LAPPING AND JOINTING
30 - 6.5 INSTALLATION
30 - 6.5.1 General
30 - 6.5.2 External walls in conjunction with concrete slab
34 - 6.5.3 Penetrations
34 - 6.5.4 Joints
37 - 6.5.5 Under slab
40 - 6.5.6 Poles, posts or stumps
40 - 6.5.7 Access ramp
40 - 6.5.8 Rendered walls
41 - SECTION 7 DEEMED-TO-SATISFY REQUIREMENTS-GRADED STONE PARTICLES
41 - 7.1 SCOPE OF SECTION
41 - 7.2 GENERAL
41 - 7.3 MATERIAL REQUIREMENTS
41 - 7.3.1 Stone particles
41 - 7.3.2 Storage and handling
41 - 7.3.3 Seals or capping
41 - 7.3.4 Termite shields
42 - 7.4 INSTALLATION
42 - 7.4.1 General
42 - 7.4.2 External walls
49 - 7.4.3 Penetrations
49 - 7.4.4 Joints
51 - 7.4.5 Under slab
51 - 7.4.6 Suspended floors
53 - 7.5 POLES, POSTS OR STUMPS
54 - 7.6 ACCESS RAMPS
55 - SECTION 8 DEEMED-TO-SATISFY REQUIREMENTS-CHEMICAL SOIL BARRIERS
55 - 8.1 SCOPE OF SECTION
55 - 8.2 GENERAL
55 - 8.3 CHEMICAL REQUIREMENTS
55 - 8.4 RESTRICTIONS ON AREAS OF APPLICATION
55 - 8.5 SOIL PREPARATION
56 - 8.6 METHOD OF APPLICATION AND INSTALLATION
56 - 8.6.1 General
56 - 8.6.2 Horizontal barrier
56 - 8.6.3 Vertical barrier
56 - 8.6.4 External perimeter barrier
57 - 8.7 STAGES OF APPLICATION
57 - 8.8 AREAS OF APPLICATION
57 - 8.8.1 General
60 - 8.8.2 Under slab
61 - 8.8.3 Suspended floors
63 - 8.8.4 Poles, posts or stumps
64 - APPENDIX A - INSTALLATION OF TERMITE MANAGEMENT SYSTEMS
64 - A1 DURABLE NOTICE
64 - A2 CERTIFICATE OF INSTALLATION
65 - APPENDIX B - ECONOMICALLY IMPORTANT WOOD-FEEDING SPECIES OF SUBTERRANEAN TERMITES IN AUSTRALIA
66 - APPENDIX C - NATURALLY TERMITE-RESISTANT TIMBERS
66 - C1 SCOPE
66 - C2 GENERAL
66 - C3 TERMITE RESISTANCE
67 - C4 AVAILABILITY
67 - C5 LIST OF NATURALLY TERMITE- RESISTANT TIMBERS
69 - APPENDIX D - PRESERVATIVE-TREATED TIMBER
69 - D1 GENERAL
69 - D2 PRESERVATIVE TREATMENT
70 - APPENDIX E - SOIL SAMPLING PROTOCOL FOR TESTING HORIZONTAL AND VERTICAL CHEMICAL SOIL BARRIERS
70 - E1 GENERAL
70 - E2 SAMPLING PROCEDURE
70 - E2.1 Sampling personnel
70 - E2.2 Sampling tool
70 - E2.3 Sampling method
71 - E2.4 Handling the sample
72 - E3 ANALYSIS
72 - E3.1 Determination of chemical concentration
72 - E3.2 Calculations
72 - E3.3 Strategy
72 - E3.4 Sample remnants
72 - E4 Reporting results

Sets out requirements for the design and construction of subterranean termite management systems for new buildings and ground level extensions and renovations. It includes provisions for both physical and chemical termite barriers throughout mainland Australia. It is intended for builders, building designers, regulatory authorities, termite management system manufacturers and installers, and those people requiring termite management systems, This Standard is the 1st part in a series of 3 Standards on termite management.

Committee
BD-074
DocumentType
Standard
ISBN
0 7337 3721 8
Pages
66
PublisherName
Standards Australia
Status
Superseded
SupersededBy
Supersedes
UnderRevision

This Standard sets out requirements for the design and construction of subterranean termite(‘termites’) management systems for new buildings and ground level extensions or renovations. It includes performance criteria, general requirements and deemed-to-satisfy solutions for both physical and chemical termite barriers throughout mainland Australia. A range of options is provided so that barriers may be used either singly, or in combination, to provide an integrated termite barrier system.The Standard includes methods to deter concealed entry by termites from the soil to the building above the termite barrier system.A TERMITE BARRIER SYSTEM CONSTRUCTED IN ACCORDANCE WITH THIS STANDARD CANNOT PREVENT TERMITE ATTACK, AS BARRIERS MAY BE BRIDGED OR BREACHED. WHERE TERMITES BRIDGE BARRIERS THEEVIDENCE MAY BE DETECTED DURING INSPECTIONS.NOTE: The diagrams used in this Standard are indicative only and are deemed to meet theperformance criteria outlined in Section 2. The diagrams apply to domestic constructiontechniques; however, they may be applied to other forms of construction and interpolation may berequired. Some diagrams may have construction details such as damp proof courses, vapourbarriers, and the like, omitted for clarity.This Standard does not apply to the following:(a) The treatment of existing buildings (see Note 1).(b) Drywood termite infestations. The systems described herein will not be effectiveagainst concealed access by drywood termites nor termite nests established without soil contact.(c) Durability, maintenance and inspection procedures or details. These are outside thescope of this Standard.NOTES:1 The treatment of existing buildings is covered in AS 3660.2.2 Issues such as the detection of termite infestation, and the necessity and accessibility for regular, competent inspections can be found in AS 3660.2. It is recommended that access forinspection, maintenance and durability issues are considered as part of the design process.3 It is stressed that the installation of a termite barrier system does not negate the need for regular competent inspections after installation.4 Activities such as turfing, paving and landscaping adjacent to the building might compromise the inspection zone clearances required throughout the Standard. Where it is known that these activities will be undertaken, the clearances given in the Standard may need to be increased to maintain the required minimum inspection zones.5 Barrier systems will not be effective where the nest is established inside the building and hasno contact with the soil.

Originated as AS CA43—1966.
Previous edition AS3660.1—1995.
Second edition 2000.

AS/NZS 4680:2006 Hot-dip galvanized (zinc) coatings on fabricated ferrous articles (Reconfirmed 2017)
AS 3600-1994 Concrete structures
AS 2870-1996 Residential slabs and footings - Construction
AS 1604-1997 Timber - Preservative-treated - Sawn and round
AS 1720.2-1990 Timber structures Timber properties
AS 2338-2004 Preferred dimensions of wrought metal products
AS 2543-1983 Nomenclature of Australian timbers
AS 3600 SUPP 3-1991 Concrete structures - Extracts from AS 3600 Concrete structures - Concrete construction requirements (Supplement to AS 3600-1988)
AS 3600 SUPP 2-1990 Concrete structures - Extracts from AS 3600 - Concrete structures - Concrete materials requirements (Supplement to AS 3600-1988)
AS 1720.2-2006 Timber structures Timber properties
AS 1141.22-1996 Methods for sampling and testing aggregates Wet/dry strength variation
AS 2338-1980 Preferred dimensions of wrought metal products
AS 1449-1994 Wrought alloy steels - Stainless and heat-resisting steel plate, sheet and strip
AS/NZS 4680:1999 Hot-dip galvanized (zinc) coatings on fabricated ferrous articles

AS 2870-1996 Residential slabs and footings - Construction
AS 3660.3-2000 Termite management Assessment criteria for termite management systems
AS 3959-2009 Construction of buildings in bushfire-prone areas
AS 2870-2011 Residential slabs and footings
SA HB 108-2013 Timber design handbook
AS 4773.2-2010 Masonry in small buildings - Construction
AS 3959-1999 Construction of buildings in bushfire-prone areas
AS 1860-1998 Installation of particleboard flooring
AS/NZS 3500.5:2000 Plumbing and Drainage Domestic installations
WS12-2012 Impact Assessment for Moisture-affected Timber-framed Construction
AS 3660.2-2000 Termite management In and around existing buildings and structures - Guidelines
AS 5604-2003 Timber - Natural durability ratings

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.