AS 3695.2:2019
Current
The latest, up-to-date edition.
Wheelchairs Requirements and test methods for electrically powered wheelchairs (including mobility scooters)
Hardcopy , PDF 1 User , PDF 3 Users , PDF 5 Users , PDF 9 Users
English
07-05-2019
Important note : Users cannot be edited or removed once added to your Multi user PDF.The objective of this Standard is to specify test requirements and minimum performance, safety and durability requirements for electrically powered wheelchairs, scooters and their battery chargers.
| Committee |
ME-067
|
| DocumentType |
Standard
|
| ISBN |
978 1 76072 422 1
|
| Pages |
63
|
| ProductNote |
Modifies EN 12184:2014.
|
| PublisherName |
Standards Australia
|
| Status |
Current
|
| Supersedes |
This European Standard specifies requirements and test methods for electrically powered wheelchairs, including electrically powered scooters with three or more wheels, with a maximum speed not exceeding 15 km/h intended to carry one person of mass not greater than 300 kg.
It also specifies requirements and test methods for battery chargers for wheelchairs and scooters.
This European Standard does not apply in total to:
- electrically powered wheelchairs intended for special purposes, such as sports, showering or toileting,
- manual wheelchairs with handrim-activated power-assisted propulsion,
- custom-made electrically powered wheelchairs,
- electrically powered stand-up wheelchairs,
- manual wheelchairs with add-on power kits used for propulsion, and
- electrically powered office chairs.
NOTE Requirements for manually propelled wheelchairs are specified in EN 12183.
First published as AS 3695-1992.
Revised and designated as AS/NZS 3695.2:2013.
Revised and designated as AS 3695.2:2019.
| ISO 7176-7:1998 | Wheelchairs — Part 7: Measurement of seating and wheel dimensions |
| ISO 7176-11:2012 | Wheelchairs — Part 11: Test dummies |
| AS/NZS 10542.1:2015 | Technical systems and aids for people with disability - Wheelchair tiedown and occupant-restraint systems Requirements and test methods for all systems (ISO 10542-1:2012, MOD) |
| ISO 7176-10:2008 | Wheelchairs — Part 10: Determination of obstacle-climbing ability of electrically powered wheelchairs |
| ISO 7176-8:1998 | Wheelchairs Part 8: Requirements and test methods for static, impact and fatigue strengths |
| ISO 7176-3:2012 | Wheelchairs — Part 3: Determination of effectiveness of brakes |
| ISO 7176-19:2008 | Wheelchairs Part 19: Wheeled mobility devices for use as seats in motor vehicles |
| ISO 7176-13:1989 | Wheelchairs — Part 13: Determination of coefficient of friction of test surfaces |
| AS 60529-2004 | Degrees of protection provided by enclosures (IP Code) (Reconfirmed 2018) |
| AS/NZS 3696.19:2009 | Wheelchairs Wheeled mobility devices for use as seats in motor vehicles (ISO 7176-19:2008, MOD) (Reconfirmed 2016) |
| ISO 7176-21:2009 | Wheelchairs Part 21: Requirements and test methods for electromagnetic compatibility of electrically powered wheelchairs and scooters, and battery chargers |
| EN 12182:2012 | Assistive products for persons with disability - General requirements and test methods |
| ISO 7176-14:1997 | Wheelchairs Part 14: Power and control systems for electric wheelchairs Requirements and test methods |
| AS/NZS ISO 7176.14:2013 | Wheelchairs Power and control systems for electrically powered wheelchairs and scooters - Requirements and test methods |
| ISO 7176-15:1996 | Wheelchairs — Part 15: Requirements for information disclosure, documentation and labelling |
| ISO 7176-22:2000 | Wheelchairs Part 22: Set-up procedures |
| ISO 7176-1:1999 | Wheelchairs Part 1: Determination of static stability |
| AS/NZS ISO 7176.25:2014 | Wheelchairs Batteries and chargers for powered wheelchairs |
| AS/NZS ISO 7176.16:2013 | Wheelchairs Resistance to ignition of postural support devices |
| EN 12183:2014 | Manual wheelchairs - Requirements and test methods |
| EN ISO 14971:2012 | Medical devices - Application of risk management to medical devices (ISO 14971:2007, Corrected version 2007-10-01) |
| ISO 68-1:1998 | ISO general purpose screw threads — Basic profile — Part 1: Metric screw threads |
| ISO 8191-2:1988 | Furniture — Assessment of ignitability of upholstered furniture — Part 2: Ignition source: match-flame equivalent |
| ISO 7193:1985 | Wheelchairs Maximum overall dimensions |
| EN 60529:1991 | Degrees of protection provided by enclosures (IP Code) |
| AS/NZS IEC 60601.1:2015 | Medical electrical equipment General requirements for basic safety and essential performance |
| AS/NZS 61000.3.2:2013 | Electromagnetic compatibility (EMC) Limits - Limits for harmonic current emissions (equipment input current less than or equal to16 A per phase) |
| ISO 7176-5:2008 | Wheelchairs — Part 5: Determination of dimensions, mass and manoeuvring space |
| AS/NZS 3696.21:2008 | Wheelchairs Requirements and test methods for electromagnetic compatibility of electrically powered wheelchairs and motorized scooters |
| ISO 7176-2:2001 | Wheelchairs Part 2: Determination of dynamic stability of electric wheelchairs |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.