AS 1684.4-2006
|
Residential timber-framed construction - Simplified - Non-cyclonic areas (SEE IMPORTANT NOTE) |
AS 1141.52-1995
|
Methods for sampling and testing aggregates Unconfined cohesion of compacted pavement materials |
AS 1141.6.2-1996
|
Methods for sampling and testing aggregates Particle density and water absorption of coarse aggregate - Pycnometer method (Reconfirmed 2016) |
AS 1449-1994
|
Wrought alloy steels - Stainless and heat-resisting steel plate, sheet and strip |
AS 1478.1-2000
|
Chemical admixtures for concrete, mortar and grout Admixtures for concrete (Reconfirmed 2018) |
AS 1141.31-1997
|
Methods for sampling and testing aggregates Light particles |
AS 1141.50-1998
|
Methods for sampling and testing aggregates Resistance to stripping of cover aggregates from binders (Reconfirmed 2016) |
AS 1141.21-1997
|
Methods for sampling and testing aggregates Aggregate crushing value (Reconfirmed 2016) |
AS 1141.20.2-2000
|
Methods for sampling and testing aggregates Average least dimension - Direct measurement (nominal sizes 5 mm and 7 mm) |
AS 1141.5-2000
|
Method for sampling and testing aggregates Particle density and water absorption of fine aggregate (Reconfirmed 2016) |
AS 1141.72-1996
|
Methods for sampling and testing of aggregates Cement content of cement stabilized materials |
AS 1141.13-1995
|
Methods for sampling and testing aggregates Material finer than 2 micrometer |
AS 1141.22-1996
|
Methods for sampling and testing aggregates Wet/dry strength variation |
AS 1684.3-1999
|
Residential timber-framed construction Cyclonic areas |
AS/NZS 4456.4:1997
|
Masonry units and segmental pavers - Methods of test - Determining compressive strength of masonry units |
AS 2837-1986
|
Wrought alloy steels - Stainless steel bars and semi-finished products |
AS 1141.25.2-1999
|
Methods for sampling and testing aggregates Degradation factor - Coarse aggregate |
AS/NZS 2904:1995
|
Damp-proof courses and flashings |
AS 1141.33-1997
|
Methods for sampling and testing aggregates Clay and fine silt (settling method) |
AS 1397-2001
|
Steel sheet and strip - Hot-dipped zinc-coated or aluminium/zinc-coated |
AS 1141.42-1999
|
Methods for sampling and testing aggregates Pendulum friction test |
AS 1141.14-1995
|
Methods for sampling and testing aggregates Particle shape, by proportional calliper |
AS 1141.24-1997
|
Methods for sampling and testing aggregates Aggregate soundness - Evaluation by exposure to sodium sulfate solution |
AS 4055-2006
|
Wind loads for housing |
AS 1141.36-1997
|
Methods for sampling and testing aggregates Sulfur in metallurgical slag, crushed rock or other pavement materials |
AS 2758.1-1998
|
Aggregates and rock for engineering purposes - Concrete aggregates |
AS 1170.2-1989
|
Minimum design loads on structures (known as the SAA Loading Code) Wind loads |
AS 1141.18-1996
|
Methods for sampling and testing aggregates Crushed particles in coarse aggregate derived from gravel |
AS/NZS 2312:1994
|
Guide to the protection of iron and steel against exterior atmospheric corrosion |
AS 1170.4-2007
|
Structural design actions Earthquake actions in Australia (Reconfirmed 2018) |
AS 1141.17-1995
|
Methods for sampling and testing aggregates Voids in dry compacted filler |
AS 1684.3-2006
|
Residential timber-framed construction Cyclonic areas |
AS 3600-2001
|
Concrete structures |
AS 1141-1974
|
Methods for sampling and testing aggregates |
AS 1141.6.1-2000
|
Methods for sampling and testing aggregates Particle density and water absorption of coarse aggregate - Weighing-in-water method (Reconfirmed 2016) |
AS/NZS 2699.1:2000
|
Built-in components for masonry construction Wall ties |
AS 1141.51-1996
|
Methods for sampling and testing aggregates Unconfined compressive strength of compacted materials |
AS 1141.29-1999
|
Methods for sampling and testing aggregates Accelerated soundness index by reflux |
AS 1141.23-1995
|
Methods for sampling and testing aggregates Los Angeles value |
AS/NZS 2699.2:2000
|
Built-in components for masonry construction Connectors and accessories |
AS/NZS 2312:2002
|
Guide to the protection of structural steel against atmospheric corrosion by the use of protective coatings |
AS 3582.3-1994
|
Supplementary cementitious materials for use with portland cement - Silica fume |
AS 1684.2-2006
|
Residential timber-framed construction Non-cyclonic areas (SEE IMPORTANT NOTE) |
AS 1141.0-1999
|
List of methods |
AS 1141.2-1999
|
Methods for sampling and testing aggregates Basic testing equipment |
AS/NZS 4456.11:1997
|
Masonry units and segmental pavers - Methods of test - Determining coefficients of expansion |
AS 1141.32-1995
|
Methods for sampling and testing aggregates Weak particles (including clay lumps, soft and friable particles) in coarse aggregates |
AS 1141.19-1998
|
Methods for sampling and testing aggregates Fine particle size distribution in road materials by sieving and decantation (Reconfirmed 2014) |
AS/NZS 4456.10:1997
|
Masonry units and segmental pavers - Methods of test - Determining resistance to salt attack |
AS 1141.20.1-2000
|
Methods for sampling and testing aggregates Average least dimension - Direct measurement (nominal size 10 mm and greater) (Reconfirmed 2014) |
AS 1684.2-1999
|
Residential timber-framed construction Non-cyclonic areas |
AS 1141.30-1996
|
Methods for sampling and testing of aggregates Coarse aggregate quality by visual comparison |
AS 1141.3.1-1996
|
Methods for sampling and testing aggregates Sampling - Aggregates |
AS 1316-1972
|
Masonry cement (metric units) |
AS 1170.4-1993
|
Minimum design loads on structures (known as the SAA Loading Code) Earthquake loads |
AS 3623-1993
|
Domestic metal framing (Reconfirmed 2018) |
AS 1141.16-1995
|
Methods for sampling and testing aggregates Angularity number |
AS 1304-1991
|
Welded wire reinforcing fabric for concrete |
AS 1141.15-1999
|
Methods for sampling and testing aggregates Flakiness index (Reconfirmed 2018) |
AS 1141.70-1996
|
Methods for sampling and testing aggregates Lime or cement content of uncured stabilized pavement materials (EDTA method) |
AS 1141.7-1995
|
Methods for sampling and testing aggregates Apparent particle density of filler |
AS 1311-1987
|
Steel tendons for prestressed concrete-7-wire stress-relieved steel strand for tendons in prestressed concrete |
AS 1310-1987
|
Steel wire for tendons in prestressed concrete |
AS 1141.53-1996
|
Methods for sampling and testing aggregates Absorption, swell and capillary rise of compacted materials |
AS 1170.3-1990
|
Minimum design loads on structures (known as the SAA Loading Code) - Snow loads |
AS 1141.34-1997
|
Methods for sampling and testing aggregates Organic impurities other than sugar |
AS 1141.3.3-1999
|
Methods for sampling and testing aggregates Sampling - Preparation of stabilized pavement materials |
AS 3582.1-1998
|
Supplementary cementitious materials for use with portland and blended cement Fly ash |
AS 1141.11-1996
|
Methods for sampling and testing aggregates Particle size distribution by sieving |
AS 1141.12-1996
|
Methods for sampling and testing of aggregates Materials finer than 75 micrometre in aggregates (by washing) |
AS 2870-1996
|
Residential slabs and footings - Construction |
AS 1313-1989
|
Steel tendons for prestressed concrete - Cold-worked high-tensile alloy steel bars for prestressed concrete |
AS 1141.3.2-1996
|
Methods for sampling and testing aggregates Sampling - Rock spalls, boulders and drill core |
AS 1141.27-1995
|
Methods for sampling and testing aggregates Resistance to wear by attrition |
AS 1141.26-1996
|
Methods for sampling and testing aggregates Secondary minerals content in basic igneous rocks |
AS/NZS 4456.12:2003
|
Masonry units and segmental pavers and flags - Methods of test Determining coefficients of contraction (Reconfirmed 2023) |
AS/NZS 4455:1997
|
Masonry units and segmental pavers |
AS/NZS 3582.3:2002
|
Supplementary cementitious materials for use with portland and blended cement Amorphous silica |
AS 1170.1-1989
|
Minimum design loads on structures (known as the SAA Loading Code) Dead and live loads and load combinations |
AS 1141.35-1995
|
Methods for sampling and testing aggregates Sugar |
AS 1303-1991
|
Steel reinforcing wire for concrete |
AS 1141.71-1998
|
Methods for sampling and testing aggregates Lime or cement content of stabilized pavement materials (EDTA method) |
AS 2193-2005
|
Calibration and classification of force-measuring systems (Reconfirmed 2017) |
AS 1316-2003
|
Masonry cement (Reconfirmed 2016) |
AS/NZS 1170.2:2002
|
Structural design actions Wind actions |
AS 1141.8-1995
|
Methods for sampling and testing aggregates Water-soluble fraction of filler |
AS/NZS 2699.3:2002
|
Built-in components for masonry construction Lintels and shelf angles (durability requirements) |
AS 2601-2001
|
The demolition of structures |
AS 1141.41-1999
|
Methods for sampling and testing aggregates Polished aggregate friction value - Horizontal bed machine |
AS/NZS 1170.1:2002
|
Structural design actions Permanent, imposed and other actions |
AS/NZS 4671:2001
|
Steel reinforcing materials |
AS 1141.1-1996
|
Methods for sampling and testing aggregates Definitions |
AS/NZS 3679.1:1996
|
Structural steel Hot-rolled bars and sections |
AS 1530.4-1997
|
Methods for fire tests on building materials, components and structures Fire-resistance tests of elements of building construction |
AS 4055-1992
|
Wind loads for housing |
AS 1672.1-1997
|
Limes and limestones Limes for building |
AS 1530.4-2005
|
Methods for fire tests on building materials, components and structures Fire-resistance test of elements of construction |
AS 2193-1978
|
Methods for calibration and grading of force-measuring systems of testing machines |
AS/NZS 4456.10:2003
|
Masonry units, segmental pavers and flags - Methods of test Determining resistance to salt attack (Reconfirmed 2023) |
AS 1141.40-1999
|
Methods for sampling and testing aggregates Polished aggregate friction value - Vertical road-wheel machine |
AS/NZS 4456.12:1997
|
Masonry units and segmental pavers - Methods of test Determining coefficients of contraction |
AS 1141.4-2000
|
Methods for sampling and testing aggregates Bulk density of aggregate (Reconfirmed 2014) |
AS 2701-2001
|
Methods of sampling and testing mortar for masonry construction (Reconfirmed 2015) |
AS 3582.2-2001
|
Supplementary cementitious materials for use with portland and blended cement Slag - Ground granulated iron blast-furnace |
AS 1141.28-1999
|
Methods for sampling and testing aggregates Ball mill value |
AS 1141.25.1-2000
|
Methods for sampling and testing aggregates Degradation factor - Source rock |
AS 1141.37-1995
|
Methods for sampling and testing aggregates Iron unsoundness |
AS/NZS 4456.11:2003
|
Masonry units, segmental pavers and flags - Methods of test Determining coefficients of expansion (Reconfirmed 2023) |
AS 1302-1991
|
Steel reinforcing bars for concrete |
AS 3972-1997
|
Portland and blended cements |
AS 1141.20.3-2000
|
Methods for sampling and testing aggregates Average least dimension - Calculation (nomograph) |
AS 1684.4-1999
|
Residential timber-framed construction, - Simplified - Non-cyclonic areas (SEE IMPORTANT NOTE) |
AS/NZS 4456.4:2003
|
Masonry units, segmental pavers and flags - Methods of test Determining compressive strength of masonry units |
AS 1684.2 N1 N2 SUPP 2-1999
|
Residential timber-framed construction Non-cyclonic areas - N1/N2 Supplement 2: Timber framing span tables - Wind classification N1/N2 - Seasoned softwood - Stress grade F7 (Supplement to AS 1684.2-1999) |
AS/NZS 2311:2000
|
Guide to the painting of buildings |