AS 3718-1992
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Water supply - Metal-bodied taps - Specified by performance
Hardcopy , PDF 1 User , PDF 3 Users , PDF 5 Users , PDF 9 Users
29-05-2024
English
01-01-1992
Important note : Users cannot be edited or removed once added to your Multi user PDF.Specifies requirements for metal-bodied draw-off taps, mixing taps mechanical (non-thermostatic) and delivery taps in the range of nominal sizes from DN 6 to DN 50 inclusive with continuous working pressures not exceeding 1.4 MPa and continuous operating temperatures not exceeding 80 degrees Celsius.
| Committee |
WS-001
|
| DocumentType |
Standard
|
| ISBN |
0 7262 7625 1
|
| Pages |
33
|
| PublisherName |
Standards Australia
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes |
First published as part of AS 1718-1975.
Revised and redesignated in part as AS 3718-1988.
Second edition 1990.
Third edition 1992.
| AS 1834.1-1991 | Material for soldering Solder alloys (Reconfirmed 2018) |
| AS 1192-1982 | Electroplated coatings - Nickel and chromium |
| AS 3500.0-1990 | National Plumbing and Drainage Code Glossary of terms |
| AS 1881-1986 | ZINC ALLOYS - CASTING INGOTS AND CASTINGS - QUALITY REQUIREMENTS (Reconfirmed 2018) |
| AS 1449-1994 | Wrought alloy steels - Stainless and heat-resisting steel plate, sheet and strip |
| AS 1769-1975 | Welded stainless steel tubes for plumbing applications (Reconfirmed 2018) |
| AS 2536-1982 | Surface texture |
| AS 2706-1984 | Numerical values - Rounding and interpretation of limiting values |
| AS 1432-1996 | Copper tubes for plumbing, gasfitting and drainage applications |
| AS 2831-1985 | Thermometers - Solid stem - Long and short - For precision use |
| AS 1565-1996 | Copper and copper alloys - Ingots and castings (Reconfirmed 2020) |
| AS 1572-1998 | Copper and copper alloys - Seamless tubes for engineering purposes (Reconfirmed 2018) |
| AS 3500.1-1992 | National Plumbing and Drainage Code Water supply |
| AS 2136-1977 | Method for detecting the susceptibility of copper and its alloys to stress corrosion cracking using the mercurous nitrate test (Reconfirmed 2018) |
| AS 1349-1986 | Bourdon tube pressure and vacuum gauges (Reconfirmed 2018) |
| AS 3855(INT)-1990 | Suitability of plumbing products for contact with potable water |
| AS 1444-1996 | Wrought alloy steels - Standard, hardenability (H) series and hardened and tempered to designated mechanical properties |
| AS 1167.1-1993 | Welding and brazing - Filler metals Filler metal for brazing and braze welding |
| AS 2837-1986 | Wrought alloy steels - Stainless steel bars and semi-finished products |
| AS 1722.1-1975 | Pipe threads of Whitworth form Sealing pipe threads (metric units) |
| AS 3688-1994 | Water supply - Copper and copper alloy body compression and capillary fittings and threaded-end connectors |
| AS 2738.2-1984 | Copper and copper alloys - Compositions and designations - Wrought products |
| AS 1722.2-1992 | Pipe threads of Whitworth form Fastening pipe threads (Reconfirmed 2017) |
| AS 2345-1992 | Dezincification resistance of copper alloys |
| AS 1568-1985 | Copper and copper alloys - Forging stock and forgings |
| AS 1567-1985 | Copper and copper alloys - Wrought rods, bars and sections |
| AS 4020(INT)-1992 | Products for use in contact with water intended for human consumption with regard to their effect on the quality of water |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.