AS 3730.27-2006
Current
The latest, up-to-date edition.
Guide to the properties of paints for buildings Clear coatings for interior timber floors
Hardcopy , PDF 1 User , PDF 3 Users , PDF 5 Users , PDF 9 Users
English
09-06-2006
Important note : Users cannot be edited or removed once added to your Multi user PDF.
Provides a guide to the features and typical characteristics that are expected of interior clear coatings for timber floors when applied by brush or pad applicator in accordance with the manufacturer’s instructions.
| Committee |
CH-003
|
| DocumentType |
Standard
|
| ISBN |
0 7337 7485 7
|
| Pages |
5
|
| ProductNote |
Reconfirmed 17/06/2016.This standard has been reconfirmed in Australia in 2016 and remains current in New Zealand. Reconfirmation Notice 17/06/2016
|
| PublisherName |
Standards Australia
|
| Status |
Current
|
| Supersedes |
This document provides a guide to the features and typical characteristics that are expected of interior clear coatings for timber floors when applied by brush or applicator (pad/lambswool) in accordance with the manufacturer’s instructions.Products complying with this Standard may be one of the following types:Type 1 - Single-pack solvent-based oxidising tung oil-based.Type 2 - Single-pack solvent-based or solvent-free moisture cure urethane.Type 3 - Two-pack solvent-based or solvent-free polyurethane.Type 4 - Water-based.Paints satisfying the requirements of this guide are equivalent to paint Type B19, B19A, B20 or B43 of AS/NZS 2311, Table 4.1.
Originated as AS 3730.26-1993 and AS 3730.27-1993.
Revised and amalgamated as AS 3730.27-2006.
| AS/NZS 1580.403.1:1999 | Paints and related materials - Methods of test Scratch resistance (Reconfirmed 2013) |
| AS/NZS 1580.211.1:1995 | Paints and related materials - Methods of test Degree of settling (Reconfirmed 2013) |
| AS/NZS 1580.101.5:1999 | Paints and related materials - Methods of test Conditions of test - Temperature and humidity control (Reconfirmed 2013) |
| AS 2854-2004 | Tinplate cans for general use |
| AS/NZS 1580.205.1:1997 | Paints and related materials - Methods of test Application properties - Brushing (Reconfirmed 2013) |
| AS/NZS 1580.101.1:1999 | Paints and related materials - Methods of test Conditions of test - Temperature, humidity and airflow control (Reconfirmed 2013) |
| AS/NZS 2310:2002 | Glossary of paint and painting terms (Reconfirmed 2016) |
| AS/NZS 1580.214.0:1996 | Paints and related materials - Methods of test Rheological properties - Guide to test methods (Reconfirmed 2013) |
| AS/NZS 1580.602.2:1995 | Paints and related materials - Methods of test Measurement of specular gloss of non-metallic paint films at 20°, 60° and 85° (Reconfirmed 2013) |
| AS 1580.401.3-2002 | Paints and related materials - Methods of test Drying times using a BK-type recorder |
| AS/NZS 1580.104.1:2000 | Paints and related materials - Methods of test Recommended materials for test panels (Reconfirmed 2013) |
| AS/NZS 2311:2000 | Guide to the painting of buildings |
| AS/NZS 1580.211.2:1995 | Paints and related materials - Methods of test Ease of manual re-incorporation (Reconfirmed 2013) |
| AS 2905-2005 | Steel drums |
| AS 3730.0-2006 | Guide to the properties of paints for buildings General information on the specification, purchasing and testing of paints |
| AS 1580.603.1-2002 | Paints and related materials - Methods of test Finish - General appearance (Reconfirmed 2013) |
| AS/NZS 1580.103.1:1995 | Paints and related materials Methods of test - Examination and preparation of samples for testing (Reconfirmed 2013) |
| AS/NZS 2311:2009 | Guide to the painting of buildings |
| AS/NZS 2589:2017 | Gypsum linings - Application and finishing |
| AS/NZS 2311:2017 | Guide to the Painting of Buildings |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.