AS 3750.10-2008
Current
The latest, up-to-date edition.
Paints for steel structures Full gloss epoxy (two-pack) (Reconfirmed 2019)
Hardcopy , PDF 1 User , PDF 3 Users , PDF 5 Users , PDF 9 Users
English
19-05-2008
Important note : Users cannot be edited or removed once added to your Multi user PDF.Specifies requirements for a two-component, full gloss epoxy paint for the protection of iron and steel against exterior atmospheric corrosion in a severe industrial or coastal marine environment.
| Committee |
CH-003
|
| DocumentType |
Standard
|
| ISBN |
0 7337 8663 4
|
| Pages |
25
|
| ProductNote |
Reconfirmed 15/11/2019.
This standard has been reconfirmed in Australia in 2019 and remains current in New Zealand. Reconfirmation Notice 15/11/2019 |
| PublisherName |
Standards Australia
|
| Status |
Current
|
| Supersedes |
This Standard specifies requirements for a two-component, full gloss epoxy paint for the protection of iron and steel against exterior atmospheric corrosion in a severe industrial or coastal marine environment. It is suitable for application by brush, roller or spray. Paint specified in this Standard is described in AS/NZS 2312 as Paint Reference C24.This paint is intended for use as a topcoat in paint systems for the protection of iron and steel against corrosion involving wet and damp areas, high humidity, coastal/marine and industrial fallout.NOTES;1 This paint may be used as detailed for systems EPF1in AS/NZS 2312.2 Appendix A contains recommendations and advice on information which should be provided by the purchaser at the time of enquiry or order.3 Additional information on the use and application of epoxy paints is contained in Appendix B.4 The paint is available in a range of colours.5 Full gloss epoxy paints should not be used as a finish coat in exterior applications where retention of colour and gloss is required for long periods of time.
Originated as AS 2603-1983.
Revised and redesignated as AS/NZS 3750.10:1994.
Revised and redesignated as AS 3750.10-2008.
| AS 1580.105.1-2002 | Paints and related materials - Methods of test Pretreatment of metal test panels - Solvent cleaning |
| AS/NZS 1580.481.1.8:1998 | Paints and related materials - Methods of test Coatings - Exposed to weathering - Degree of cracking (Reconfirmed 2013) |
| AS/NZS 1580.205.2:1997 | Paints and related materials - Methods of test Application properties - Conventional spraying (Reconfirmed 2013) |
| AS/NZS 1580.204.1:1998 | Paints and related materials - Methods of test Fineness of grind (Reconfirmed 2013) |
| AS 1580.401.5-2002 | Paints and related materials - Methods of test Hard dry condition - Sanding test |
| AS 1580.301.2-1990 | Paints and related materials - Methods of test Non-volatile content by volume (volume solids) (Reconfirmed 2013) |
| AS/NZS 1580.103.1:1995 | Paints and related materials Methods of test - Examination and preparation of samples for testing (Reconfirmed 2013) |
| AS/NZS 1580.481.1.6:1998 | Paints and related materials - Methods of test Coatings - Exposed to weathering - Degree of erosion (Reconfirmed 2013) |
| AS 1580.108.2-2004 | Paints and related materials - Methods of test Dry film thickness - Paint inspection gauge (Reconfirmed 2019) |
| AS/NZS 1580.403.1:1999 | Paints and related materials - Methods of test Scratch resistance (Reconfirmed 2013) |
| AS/NZS 1580.211.2:1995 | Paints and related materials - Methods of test Ease of manual re-incorporation (Reconfirmed 2013) |
| AS/NZS 3750.13:1997 | Paints for steel structures Epoxy primer (two-pack) |
| AS/NZS 1580.481.1.9:1998 | Paints and related materials - Methods of test Coatings - Exposed to weathering - Degree of blistering (Reconfirmed 2013) |
| AS/NZS 1580.481.1.7:1998 | Paints and related materials - Methods of test Coatings - Exposed to weathering - Degree of checking (Reconfirmed 2013) |
| AS 2700-1996 | Colour Standards for general purposes - Swatches |
| AS/NZS 1580.401.1:1999 | Paints and related materials - Methods of test Surface dry condition (Reconfirmed 2013) |
| AS/NZS 1580.211.1:1995 | Paints and related materials - Methods of test Degree of settling (Reconfirmed 2013) |
| AS 3530-1988 | Solvents - Mineral turpentine and white spirit |
| AS/NZS 1580.214.5:1997 | Paints and related materials - Methods of test Consistency - Rotational viscometer (Reconfirmed 2013) |
| AS 1580.481.3-2002 | Paints and related materials - Methods of test Coatings - Exposed to weathering - Degree of corrosion of coated metal substrates (Reconfirmed 2013) |
| AS/NZS 2310:2002 | Glossary of paint and painting terms (Reconfirmed 2016) |
| AS 1627.4-2005 | Metal finishing - Preparation and pretreatment of surfaces Abrasive blast cleaning of steel (Reconfirmed 2017) |
| AS/NZS 1580.457.1:1996 | Paints and related materials - Methods of test Resistance to natural weathering (Reconfirmed 2013) |
| AS/NZS 1580.601.1:1995 | Paints and related materials - Methods of test Colour - Visual comparison (Reconfirmed 2013) |
| AS/NZS 2312:2002 | Guide to the protection of structural steel against atmospheric corrosion by the use of protective coatings |
| AS 1580.408.2-2004 | Paints and related materials - Methods of test Adhesion - Knife test (Reconfirmed 2019) |
| AS/NZS 1580.214.1:1997 | Paints and related materials - Methods of test Consistency - Stormer viscometer (Reconfirmed 2013) |
| AS 2905-2005 | Steel drums |
| AS/NZS 1580.602.2:1995 | Paints and related materials - Methods of test Measurement of specular gloss of non-metallic paint films at 20°, 60° and 85° (Reconfirmed 2013) |
| AS/NZS 1580.481.1.10:1998 | Paints and related materials - Methods of test Coatings - Exposed to weathering - Degree of flaking and peeling (Reconfirmed 2013) |
| AS/NZS 1580.205.4:1998 | Paints and related materials - Methods of test Application properties - Airless spraying (Reconfirmed 2013) |
| AS/NZS 1580.205.1:1997 | Paints and related materials - Methods of test Application properties - Brushing (Reconfirmed 2013) |
| AS 1580.603.1-2002 | Paints and related materials - Methods of test Finish - General appearance (Reconfirmed 2013) |
| AS/NZS 1580.108.1:1994 | Paints and related materials - Methods of test Determination of dry film thickness on metallic substrates - Non-destructive methods (Reconfirmed 2013) |
| AS 1580.0-2004 | Paints and related materials - Methods of test Introduction and list of methods |
| AS 1580.105.2-2002 | Paints and related materials - Methods of test Pretreatment of metal test panels - Sanding |
| AS 1580.402.1-2003 | Paints and related materials - Methods of test Bend test |
| AS/NZS 1580.101.5:1999 | Paints and related materials - Methods of test Conditions of test - Temperature and humidity control (Reconfirmed 2013) |
| AS 2854-2004 | Tinplate cans for general use |
| AS/NZS 1580.205.3:1997 | Paints and related materials - Methods of test Application properties - Roller coating (Reconfirmed 2013) |
| AS/NZS 1580.101.1:1999 | Paints and related materials - Methods of test Conditions of test - Temperature, humidity and airflow control (Reconfirmed 2013) |
| AS/NZS 1580.404.1:1997 | Paints and related materials - Methods of test Recoating properties (Reconfirmed 2013) |
| AS 1580.454.1-2002 | Paints and related materials - Methods of test Resistance to mineral oil and other organic liquids |
| AS/NZS 2311:2009 | Guide to the painting of buildings |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.