AS 3777-1990
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Shank hooks and large-eye hooks - Maximum 25 t
Hardcopy , PDF 1 User , PDF 3 Users , PDF 5 Users , PDF 9 Users
30-06-2017
English
01-01-1990
Specifies requirements for design, manufacture, marking, and testing of forged lifting hooks having a working load limit of not more than 25 t, for use with wire rope, sheave blocks, serial hoists, or general engineering applications. It includes large eye hooks and shank hooks. Guidance on information to be supplied with enquiries and orders is given in an appendix.
Committee |
ME-025
|
DocumentType |
Standard
|
ISBN |
0 7262 6193 9
|
Pages |
11
|
PublisherName |
Standards Australia
|
Status |
Superseded
|
SupersededBy | |
Supersedes | |
UnderRevision |
This Standard specifies requirements for forged lifting hooks having a working load limit of not more than 25 t, for use with wire rope, sheave blocks, serial hoists, or general engineering applications. It includes large eye hooks and shank hooks.NOTES:1. Hooks for use with Grade T chain are covered by AS 3776.2. Guidance on information that should be supplied with enquiries and orders is given in Appendix A.
AS 1199-1988 | Sampling procedures and tables for inspection by attributes |
AS 1171-1998 | Non-destructive testing - Magnetic particle testing of ferromagnetic products, components and structures (Reconfirmed 2022) |
AS B199-1962 | Undercuts and runouts for screw threads |
AS 1399-1990 | Guide to AS 1199 - Sampling procedures and tables for inspection by attributes |
AS 3776-2006 | Lifting components for Grade T chain slings |
AS 1418.1-2002 | Cranes, hoists and winches General requirements |
AS 1627.6-2003 | Metal finishing - Preparation and pretreatment of surfaces Chemical conversion treatment of metals (Reconfirmed 2017) |
AS 1065-1988 | Non-destructive testing - Ultrasonic testing of carbon and low alloy steel forgings (Reconfirmed 2022) |
AS 2193-2005 | Calibration and classification of force-measuring systems (Reconfirmed 2017) |
AS 1721-1985 | General purpose metric screw threads (Reconfirmed 2017) |
AS 1790-1984 | Electroplated coatings - Cadmium on iron or steel |
AS 1650-1989 | Hot-dipped galvanized coatings on ferrous articles |
AS 1444-2007 | Wrought alloy steels - Standard, hardenability (H) series and hardened and tempered to designated mechanical properties (Reconfirmed 2017) |
AS 1442-2007 | Carbon steels and carbon-manganese steels - Hot rolled bars and semifinished products (Reconfirmed 2017) |
AS 1789-2003 | Electroplated zinc (electrogalvanized) coatings on ferrous articles (batch process) (Reconfirmed 2017) |
AS 1627.0-1997 | Metal finishing - Preparation and pretreatment of surfaces Method selection guide (Reconfirmed 2017) |
AS 1380.1-1998 | Fibre-rope slings - Product specification |
AS 3585-2008 | End fittings for synthetic flat-webbing and round slings (Reconfirmed 2019) |
AS 2089-1993 | Sheave blocks for lifting purposes |
AS 3776-2006 | Lifting components for Grade T chain slings |
AS 1418.14-1996 | Cranes (including hoists and winches) Requirements for cranes subject to arduous working conditions |
AS 1418.1-2002 | Cranes, hoists and winches General requirements |
AS 2089-2008 | Sheave blocks for lifting purposes (Reconfirmed 2019) |
AS 1418.2-1997 | Cranes (including hoists and winches) Serial hoists and winches |
AS 3777-2008 | Shank hooks and large eye hooks - Maximum 60 t (Reconfirmed 2019) |
AS 2318-2006 | Swivels for lifting applications (Reconfirmed 2022) |
AS 3585-1990 | End fittings for flat-webbing slings |
AS 1418.1-1994 | Cranes (including hoists and winches) General requirements |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.