AS 2905-2005
|
Steel drums
|
AS 1199.2-2003
|
Sampling procedures for inspection by attributes Sampling plans indexed by limiting quality (LQ) for isolated lot inspection (Reconfirmed 2016)
|
AS/NZS 1580.104.1:2000
|
Paints and related materials - Methods of test Recommended materials for test panels (Reconfirmed 2013)
|
AS/NZS 1580.205.2:1997
|
Paints and related materials - Methods of test Application properties - Conventional spraying (Reconfirmed 2013)
|
AS 2905-1986
|
Steel drums
|
AS 2378-1996
|
Density bottles
|
AS/NZS 1580.108.1:1994
|
Paints and related materials - Methods of test Determination of dry film thickness on metallic substrates - Non-destructive methods (Reconfirmed 2013)
|
AS 2854-2004
|
Tinplate cans for general use
|
AS/NZS 1580.103.1:1995
|
Paints and related materials Methods of test - Examination and preparation of samples for testing (Reconfirmed 2013)
|
AS/NZS 1580.401.8:1997
|
Paints and related materials - Methods of test No-pick-up time of road marking paints (Reconfirmed 2013)
|
AS/NZS 2009:2002
|
Glass beads for pavement-marking materials
|
AS/NZS 1580.211.2:1995
|
Paints and related materials - Methods of test Ease of manual re-incorporation (Reconfirmed 2013)
|
AS/NZS 2904:1995
|
Damp-proof courses and flashings
|
AS 1199.3-2003
|
Sampling procedures for inspection by attributes Skip-lot sampling procedures (Reconfirmed 2016)
|
AS 1742.3-2002
|
Manual of uniform traffic control devices - Traffic control devices for works on roads
|
AS/NZS 1580.601.1:1995
|
Paints and related materials - Methods of test Colour - Visual comparison (Reconfirmed 2013)
|
AS 2700-1996
|
Colour Standards for general purposes - Swatches
|
AS 2758.2-1996
|
Aggregates and rock for engineering purposes - Aggregate for sprayed bituminous surfacing
|
AS 1199.1-2003
|
Sampling procedures for inspection by attributes Sampling schemes indexed by acceptance quality limit (AQL) for lot-by-lot inspection (Reconfirmed 2016)
|
AS/NZS ISO 9000:2000
|
Quality management systems - Fundamentals and vocabulary
|
AS/NZS 2310:2002
|
Glossary of paint and painting terms (Reconfirmed 2016)
|
AS 1152-1993
|
Specification for test sieves
|
AS/NZS ISO 9004:2000
|
Quality management systems - Guidelines for performance improvements
|
AS/NZS ISO 9000:2006
|
Quality management systems - Fundamentals and vocabulary
|
AS/NZS 1580.107.2:1995
|
Paints and related materials - Methods of test Determination of wet film thickness from wet film mass (Reconfirmed 2013)
|
AS/NZS 2009:2006
|
Glass beads for pavement-marking materials (Reconfirmed 2016)
|
AS/NZS 1580.214.1:1997
|
Paints and related materials - Methods of test Consistency - Stormer viscometer (Reconfirmed 2013)
|
AS/NZS 1580.205.4:1998
|
Paints and related materials - Methods of test Application properties - Airless spraying (Reconfirmed 2013)
|
AS/NZS 1580.107.3:1997
|
Paints and related materials - Methods of test Determination of wet film thickness by gauge (Reconfirmed 2013)
|
AS 1199.4-2003
|
Sampling procedures for inspection by attributes Procedures for assessment of declared quality levels (Reconfirmed 2016)
|
AS/NZS 1580.211.1:1995
|
Paints and related materials - Methods of test Degree of settling (Reconfirmed 2013)
|
AS 1580.107.1-2004
|
Paints and related materials - Methods of test Determination of wet film thickness from dry film mass
|
AS 1199.0-2003
|
Sampling procedures for inspection by attributes Introduction to the ISO 2859 attribute sampling system (Reconfirmed 2016)
|
AS/NZS 1580.602.2:1995
|
Paints and related materials - Methods of test Measurement of specular gloss of non-metallic paint films at 20°, 60° and 85° (Reconfirmed 2013)
|
HB 18.44-1991
|
Guidelines for third-party certification and accreditation - Guide 44: General rules for ISO or IEC international third-party certification schemes for products
|
AS 1580.105.2-2002
|
Paints and related materials - Methods of test Pretreatment of metal test panels - Sanding
|
AS/NZS 1580.101.1:1999
|
Paints and related materials - Methods of test Conditions of test - Temperature, humidity and airflow control (Reconfirmed 2013)
|