AS 4142.2-1993

1 - AS 4142.2:1993 FIBRE ROPES - THREE-STRAND HAWSER-LAID AND EIGHT-STRAND PLAITED
4 - PREFACE
5 - CONTENTS
6 - 1 SCOPE
6 - 2 REFERENCED DOCUMENTS
7 - 3 DEFINITIONS
7 - 3.1 Three-strand hawser-laid
7 - 3.2 Eight-strand plaited
7 - 3.3 Twist
7 - 3.4 Length of lay of rope
8 - 4 NOTATIONS
8 - 5 DESIGNATION
8 - 6 CLASSIFICATION
8 - 7 CONSTRUCTION
9 - 8 DYEING AND FINISHING
9 - 8.1 General
9 - 8.2 Fungicide content
9 - 9 DIMENSIONS
9 - 9.1 Diameter (three-strand hawser-laid rope only)
9 - 9.2 Length of rope
9 - 9.3 Linear density
9 - 9.4 Length of ten lays
9 - 10 BREAKING FORCE
9 - 11 MARKING
9 - 11.1 General
10 - 11.2 Identification of fibre
11 - 11.3 Statement of compliance
11 - 12 PACKAGING
19 - APPENDIX A - MEANS FOR DEMONSTRATING COMPLIANCE WITH THIS STANDARD
19 - A1 SCOPE
19 - A2 STATISTICAL SAMPLING
19 - A3 PRODUCT CERTIFICATION
19 - A4 SUPPLIER’S QUALITY SYSTEM
20 - A5 OTHER MEANS OF ASSESSMENT
20 - A5.1 General
20 - A5.2 Example of other means of assessment
20 - A5.3 Test certificate (if required)
20 - A5.4 Acceptance
20 - A5.5 Independent tests
21 - APPENDIX B - EQUIVALENT DEADWEIGHT BREAKING LOADS FOR THREE-STRAND HAWSER-LAID AND EIGHT-STRAND PLAITED ROPES
21 - B1 METHOD OF USING EQUIVALENTS
21 - B2 FITTINGS
21 - B3 SLINGS AND SIMILAR LIFTING ARRANGEMENTS
21 - B4 EQUIVALENCE OF THREE-STRAND AND EIGHT-STRAND ROPES

Specifies general design, performance and marking requirements for both three-strand hawser-laid and eight-strand plaited fibre ropes.

This Standard specifies manufacturing and performance requirements for three-strand hawser-laid and eight-strand plaited rope made from natural or man-made textile staple fibre, monofilament or multifilament yarn. Ropes made from the various natural and man-made textiles listed in Clause 6 are covered by this Standard.NOTES:1 Some hard-laid rope or rope manufactured for special requirements may not be able to meet all the requirements in this Standard.2 Advisory information on alternative methods of determining compliance of a lot with this Standard is given in Appendix A.3 Equivalent deadweight breaking loads are given in Appendix B.1 SCOPE This Standard specifies manufacturing and performance requirements for three-strand hawser-laid and eight-strand plaited rope made from natural or man-made textile staple fibre, monofilament or multifilament yarn. Ropes made from the various natural and man-made textiles listed in Clause 6 are covered by this Standard.NOTES:1 Some hard-laid rope or rope manufactured for special requirements may not be able to meet all the requirements in this Standard.2 Advisory information on alternative methods of determining compliance of a lot with this Standard is given in Appendix A.3 Equivalent deadweight breaking loads are given in Appendix B.

First published as part of AS (E)L507-1941.
AS (E)L508 first published 1941.
AS (E)L507-1941 and AS (E)L508-1941 revised, amalgamated and redesignated in part as AS L18-1963.
Second edition 1971.
AS L56 first published 1971.
AS L57 first published 1971.
AS L18-1971, AS L56-1971 and AS L57-1971 revised, amalgamated and redesignated in part as AS 1504-1974.
AS 1752 first published 1975.
Second edition 1983.
Second edition AS 1504-1983.
AS 1504-1983 and AS 1752-1983 revised, amalgamated and redesignated in part as AS 4142.2-1993.
Incorporating: Amdt 1-1996