AS 1403-2004
|
Design of rotating steel shafts (Reconfirmed 2016) |
AS 2452.1-2004
|
Non-destructive testing - Determination of thickness Determination of wall thickness of pipe by the use of radiography |
AS 2671-2002
|
Hydraulic fluid power - General requirements for systems (ISO 4413:1998, MOD) |
AS/NZS 2980:2007
|
Qualification of welders for fusion welding of steels |
AS 1012.4.1-1999
|
Methods of testing concrete Determination of air content of freshly mixed concrete - Measuring reduction in concrete volume with increased air pressure |
AS 61508.4-1999
|
Functional safety of electrical/electronic/programmable electronic safety-related systems - Definition and abbreviations |
AS 4100 SUPP 1-1999
|
Steel structures - Commentary (Supplement to AS 4100-1998) |
AS 2759-2004
|
Steel wire rope - Use, operation and maintenance |
AS 1012.12.1-1998
|
Methods of testing concrete Determination of mass per unit volume of hardened concrete - Rapid measuring method (Reconfirmed 2014) |
AS 1012.18-1996
|
Methods of testing concrete Determination of setting time of fresh concrete, mortar and grout by penetration resistance (Reconfirmed 2014) |
AS/NZS 1554.5:2004
|
Structural steel welding Welding of steel structures subject to high levels of fatigue loading |
AS 1012.19.2-2000
|
Methods of testing concrete Accelerated curing of concrete compression test specimens - Warm water method (Reconfirmed 2014) |
AS/NZS 1170.1:2002
|
Structural design actions Permanent, imposed and other actions |
AS 4024.1601-2006
|
Safety of machinery Design of controls, interlocks and guarding - Guards - General requirements for the design and construction of fixed and movable guards |
AS 4024.1904-2006
|
Safety of machinery Displays, controls, actuators and signals - Indication, marking and actuation - Requirements for visual, auditory and tactile signals |
AS/NZS 4812:2003
|
Non-destructive examination and discard criteria for wire ropes in mine winding systems |
AS/NZS 1554.4:2004
|
Structural steel welding - Welding of high strength quenched and tempered steels |
AS/NZS 1170.2:2002
|
Structural design actions Wind actions |
AS 60204.1-2005
|
Safety of machinery - Electrical equipment of machines General requirements (IEC 60204-1, Ed. 5 (FDIS) MOD) |
AS 2076-1996
|
Wire-rope grips for non-lifting applications |
AS/NZS 3000:2007
|
Electrical installations (known as the Australian/New Zealand Wiring Rules) |
AS 2824-2003
|
Non-destructive testing - Ultrasonic methods - Evaluation and quality classification of metal bearing bonds (ISO 4386-1:1992, MOD) |
AS/NZS 1768:2007
|
Lightning protection |
AS/NZS 1554.3:2008
|
Structural steel welding Welding of reinforcing steel |
AS 2452.3-2005
|
Non-destructive testing - Determination of thickness - Use of ultrasonic testing |
AS 1012.4.2-1999
|
Methods of testing concrete Determination of air content of freshly mixed concrete - Measuring reduction in air pressure in chamber above concrete |
AS 2841-2005
|
Galvanized steel wire strand (Reconfirmed 2016) |
AS 61508.2-2001
|
Functional safety of electrical/electronic/programmable electronic safety-related systems - Requirements for electrical/electronic/programmable electronic safety-related systems |
AS 1012.16-1996
|
Methods of testing concrete Determination of creep of concrete cylinders in compression (Reconfirmed 2014) |
AS 2574-2000
|
Non-destructive testing - Ultrasonic testing of ferritic steel castings (Reconfirmed 2022) |
AS 1012.20-1992
|
Methods of testing concrete Determination of chloride and sulfate in hardened concrete and concrete aggregates |
AS 2062-1997
|
Non-destructive testing - Penetrant testing of products and components |
AS 61508.0-2006
|
Functional safety of electrical/electronic/programmable electronic safety-related systems - Functional safety and AS 61508 |
AS 3775.1-2004
|
Chain slings - Grade T - Product specification |
AS 1012.3.2-1998
|
Methods of testing concrete Determination of properties related to the consistency of concrete - Compacting factor test (Reconfirmed 2014) |
AS 1012.13-1992
|
Methods of testing concrete Determination of the drying shrinkage of concrete for samples prepared in the field or in the laboratory |
AS/NZS 4261:1994
|
Reusable containers for the collection of sharp items used in human and animal medical applications |
AS 1171-1998
|
Non-destructive testing - Magnetic particle testing of ferromagnetic products, components and structures (Reconfirmed 2022) |
AS 1796-2001
|
Certification of welders and welding supervisors (Reconfirmed 2016) |
AS 4024.1301-2006
|
Safety of machinery Risk assessment - Principles of risk assessment |
AS 1012.8.2-2000
|
Methods of testing concrete Method for making and curing concrete - Flexure test specimens |
AS 1012.3.3-1998
|
Methods of testing concrete Determination of properties related to the consistency of concrete - Vebe test (Reconfirmed 2014) |
AS 2177-2006
|
Non-destructive testing - Radiography of welded butt joints in metal |
AS 1657-1992
|
Fixed platforms, walkways, stairways and ladders - Design, construction and installation |
AS 1012.3.1-1998
|
Methods of testing concrete Determination of properties related to the consistency of concrete - Slump test |
AS 4544-2005
|
Non-destructive testing - Eddy current testing for the detection of surface flaws - Ferromagnetic and non-ferromagnetic metallic products |
AS 1012.2-1994
|
Methods of testing concrete Preparation of concrete mixes in the laboratory |
AS 4024.1501-2006
|
Safety of machinery Design of safety related parts of control systems - General principles for design (Reconfirmed 2014) |
AS/NZS 3008.1.1:1998
|
Electrical installations - Selection of cables - Cables for alternating voltages up to and including 0.6/1 kV - Typical Australian installation conditions |
AS 1012.1-1993
|
Methods of testing concrete Sampling of fresh concrete |
AS 3990-1993
|
Mechanical equipment - Steelwork (Reconfirmed 2016) |
AS 3507.2-2006
|
Non-destructive testing Radiographic determination of quality of ferrous castings |
AS 1012.17-1997
|
Methods of testing concrete Determination of the static chord modulus of elasticity and Poisson's ratio of concrete specimens (Reconfirmed 2014) |
AS 1710-2007
|
Non-destructive testing - Ultrasonic testing of carbon and low alloy steel plate and universal sections - Test methods and quality classification (Reconfirmed 2017) |
AS 2569.1-1982
|
Guide to the lifting and moving of patients Safe manual lifting and moving of patients |
AS 1012.11-2000
|
Methods of testing concrete Determination of the modulus of rupture (Reconfirmed 2014) |
AS 3978-2003
|
Non-destructive testing - Visual inspection of metal products and components (Reconfirmed 2022) |
AS 1940-2004
|
The storage and handling of flammable and combustible liquids |
AS 4024.1604-2006
|
Safety of machinery Design of controls, interlocks and guarding - Emergency stop - Principles for design |
AS 2207-2007
|
Non-destructive testing - Ultrasonic testing of fusion welded joints in carbon and low alloy steel (Reconfirmed 2017) |
AS 1012.10-2000
|
Methods of testing concrete Determination of indirect tensile strength of concrete cylinders ('Brazil' or splitting test) (Reconfirmed 2014) |
AS 2214-2004
|
Certification of welding supervisors - Structural steel welding |
AS 2342-1992
|
Development, testing and implementation of information and safety symbols and symbolic signs (Reconfirmed 2013) |
AS 1394-2001
|
Round steel wire for ropes |
AS 61508.6-2001
|
Functional safety of electrical/electronic/programmable electronic safety-related systems - Guidelines on the application of AS 61508.2 and AS 61508.3 |
AS 1012.4.3-1999
|
Methods of testing concrete Determination of air content of freshly mixed concrete - Measuring air volume when concrete dispersed in water |
AS 1012.12.2-1998
|
Methods of testing concrete Determination of mass per unit volume of hardened concrete - Water displacement method (Reconfirmed 2014) |
AS/NZS 1554.7:2006
|
Structural steel welding Welding of sheet steel structures |
AS/NZS 1554.2:2003
|
Structural steel welding Stud welding (steel studs to steel) |
AS 2084-1987
|
Non-destructive testing - Eddy current testing of metal tubes |
AS 60204.11-2006
|
Safety of machinery - Electrical equipment of machines Requirements for HV equipment for voltages above 1000 V a.c. or 1500 V d.c and not exceeding 36 kV (IEC 60204-11, Ed. 1.0 (2000) MOD) |
AS 1012.3.4-1998
|
Methods of testing concrete Determination of properties related to the consistency of concrete - Compactibility index (Reconfirmed 2014) |
AS 1012.9-1999
|
Methods of testing concrete Determination of the compressive strength of concrete specimens |
AS 2321-2006
|
Short-link chain for lifting purposes |
AS 61508.7-2001
|
Functional safety of electrical/electronic/programmable electronic safety-related systems - Overview of techniques and measures |
AS 3507.1-2003
|
Non-destructive testing Guide to radiography for ferrous castings |
AS 1012.6-1999
|
Methods of testing concrete Method for the determination of bleeding of concrete |
AS 1065-1988
|
Non-destructive testing - Ultrasonic testing of carbon and low alloy steel forgings (Reconfirmed 2022) |
AS 3600-2001
|
Concrete structures |
AS/NZS 1554.1:2004
|
Structural steel welding Welding of steel structures |
AS 1012.21-1999
|
Methods of testing concrete Determination of water absorption and apparent volume of permeable voids in hardened concrete (Reconfirmed 2014) |
AS/NZS 1554.6:1994
|
Structural steel welding - Welding stainless steels for structural purposes |
AS 61508.1-1999
|
Functional safety of electrical/electronic/programmable electronic safety-related systems - General requirements |
AS/NZS 1891.4:2000
|
Industrial fall-arrest systems and devices Selection, use and maintenance |
AS 4024.1401-2006
|
Safety of machinery Ergonomic principles - Design principles - Terminology and general principles |
AS 3600 SUPP 1-1994
|
Concrete structures - Commentary (Supplement to AS 3600-1994) |
AS 1012.14-1991
|
Methods of testing concrete Method for securing and testing cores from hardened concrete for compressive strength |
AS 61508.3-1999
|
Functional safety of electrical/electronic/programmable electronic safety-related systems - Software requirements |
AS 61508.5-1999
|
Functional safety of electrical/electronic/programmable electronic safety-related systems - Examples of methods for the determination of safety integrity levels |
AS 4100-1998
|
Steel structures (Reconfirmed 2016) |
AS 1012.8.1-2000
|
Methods of testing concrete Method for making and curing concrete - Compression and indirect tensile test specimens |
AS 2569.2-1987
|
Guide to the lifting and moving of patients Selection and use of mechanical aids for patient lifting and moving |
AS/NZS 1170.0:2002
|
Structural design actions General principles |
AS 1012.19.1-2000
|
Methods of testing concrete Accelerated curing of concrete compression test specimens - Hot water method (Reconfirmed 2014) |
AS 4142.1-1993
|
Fibre ropes Care and safe usage |
AS 1012.5-1999
|
Methods of testing concrete Determination of mass per unit volume of freshly mixed concrete |