AS 4956-2008
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Air valves for water supply
Hardcopy , PDF 1 User , PDF 3 Users , PDF 5 Users , PDF 9 Users
29-07-2024
English
28-07-2008
Important note : Users cannot be edited or removed once added to your Multi user PDF.Specifies requirements for air valves for water systems. This Standard is applicable to valves rated at 1600 kPa, 2100 kPa and 3500 kPa for sizes DN 15 to DN 400.
| Committee |
WS-022
|
| DocumentType |
Standard
|
| ISBN |
0 7337 8828 9
|
| Pages |
22
|
| PublisherName |
Standards Australia
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes | |
| UnderRevision |
This Standard specifies requirements for metallic bodied PN 16, PN 21 and PN 35 air valves for water supply. This Standard is applicable to valve sizes DN 15 to DN 400 that are suitable for, but not limited to, use in drinking water supplies, with a maximum operating temperature of 60°C (see Note 2).This Standard covers the following types of valves:(a) Large-orifice air valve.(b) Small-orifice air valve. (c) Double-orifice air valve. (d) Anti-slam air valve.(e) Anti-vacuum valve.NOTES: 1 Purchasing guidelines are given in Appendix B.2 Based upon a maximum water temperature of 40°C within the main and the air valve being located on the top of an above-ground pipeline exposed to sunlight.
First published as AS 4956-2008.
| AS/NZS 1567:1997 | Copper and copper alloys - Wrought rods, bars and sections (Reconfirmed 2021) |
| AS 1237.2-2002 | Plain washers for metric bolts, screws and nuts for general purposes - Tolerances |
| AS 1830-2007 | Grey cast iron (Reconfirmed 2017) |
| AS 2317-1998 | Collared eyebolts |
| AS 1831-2007 | Ductile cast iron (Reconfirmed 2017) |
| AS 1627.4-2005 | Metal finishing - Preparation and pretreatment of surfaces Abrasive blast cleaning of steel (Reconfirmed 2017) |
| AS 1112.3-2000 | ISO metric hexagon nuts - Product grade C |
| HB 18.28-2005 | Conformity assessment - Guidance on a third-party certification system for products |
| AS/NZS 4020:2005 | Testing of products for use in contact with drinking water |
| AS 1627.0-1997 | Metal finishing - Preparation and pretreatment of surfaces Method selection guide (Reconfirmed 2017) |
| AS 1275-1985 | |
| AS 4087-2004 | Metallic flanges for waterworks purposes |
| AS 1646-2007 | Elastomeric seals for waterworks purposes (Reconfirmed 2018) |
| AS 3894.1-2002 | Site testing of protective coatings Non-conductive coatings - Continuity testing - High voltage (brush) method (Reconfirmed 2013) |
| AS 1565-1996 | Copper and copper alloys - Ingots and castings (Reconfirmed 2020) |
| AS 2345-2006 | Dezincification resistance of copper alloys |
| AS 1111.1-2000 | ISO metric hexagon bolts and screws - Product grade C - Bolts |
| AS/NZS 4158:2003 | Thermal-bonded polymeric coatings on valves and fittings for water industry purposes (Reconfirmed 2015) |
| AS/NZS 1568:1998 | Copper and copper alloys - Forging stock and forgings |
| AS 2738-2000 | Copper and copper alloys - Compositions and designations of refinery products, wrought products, ingots and castings (Reconfirmed 2018) |
| AS 1199.1-2003 | Sampling procedures for inspection by attributes Sampling schemes indexed by acceptance quality limit (AQL) for lot-by-lot inspection (Reconfirmed 2016) |
| AS 2129-2000 | Flanges for pipes, valves and fittings (Reconfirmed 2016) |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.