AS/NZS 1111:1996
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
ISO metric hexagon commercial bolts and screws
Hardcopy , PDF 1 User , PDF 3 Users , PDF 5 Users , PDF 9 Users
29-05-2024
05-06-1996
Important note : Users cannot be edited or removed once added to your Multi user PDF.
Specifies the dimensional and marking requirements for commercial hexagon bolts and screws with ISO metric coarse pitch series threads in diameters from 5 mm to 64 mm inclusive, and the material requirements for steel bolts and screws of property class 4.6.
| Committee |
ME-029
|
| DocumentType |
Standard
|
| ISBN |
0 7337 0486 7
|
| Pages |
17
|
| PublisherName |
Standards Australia
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes |
This Standard specifies the dimensional and marking requirements for commercial hexagon bolts and screws with ISO metric coarse pitch series threads in diameters from 5 mm to 64 mm inclusive, and the material requirements for steel bolts and screws of property class 4.6.NOTES:1 The range of nominal sizes included in this Standard is considered adequate for most of the applications for which this series is likely to be employed, but for the convenience of users requiring larger sizes, further information in relation to the derivation of tolerances and head dimensions for bolts and screws with thread sizes over 64 mm is provided in Appendix A and Appendix B, respectively.2 The recommended classes of nut suitable for assembly with ISO metric hexagon commercial bolts and screws are property class 5 for normal, slotted and castle nuts, and property class 04 for thin nuts. These classes are in accordance with AS 1112.3 Precision bolts or screws of property classes 4.6 and 5.8 in accordance with AS/NZS 1110 may be supplied in lieu of commercial products.4 The purchaser, when ordering or enquiring about bolts or screws complying with this Standard, should provide the supplier with all relevant details. The complete designation required is given in Clause 9.
| Standards | Relationship |
| ISO 4016:1988 | Identical |
| ISO 4018:1988 | Identical |
First published in Australia as AS 1111-1972.
Second edition 1980.
Jointly revised and designated AS/NZS 1111:1996.
| AS/NZS 1110:1995 | ISO metric precision hexagon bolts and screws |
| AS 1112-1980 | ISO metric hexagon nuts, including thin nuts, slotted nuts and castle nuts |
| AS 1214-1983 | Hot-dip galvanized coatings on threaded fasteners (ISO metric coarse thread series) |
| AS 1275-1985 | |
| AS 1897-1976 | Electroplated coatings on threaded components (metric coarse series) |
| AS/NZS 4291.1:1995 | Mechanical properties of fasteners Bolts, screws and studs |
| AS 1654-1974 | Limits and fits for engineering (Metric units) |
| HB 132.2-1999 | Structural upgrading of older houses Cyclone areas |
| AS 1137.3-1981 | Insulators - Porcelain and glass indoor and outdoor station post insulators (for voltages greater than 1000 V a.c.) |
| AS 3819.1-1998 | Heavy duty towing components 70 mm and 110 mm diameter towballs for heavy duty couplings (Reconfirmed 2016) |
| AS 1275-1985 | |
| AS 4181-1999 | Stainless steel clamps for waterworks purposes |
| AS 2129-2000 | Flanges for pipes, valves and fittings (Reconfirmed 2016) |
| AS 2089-1993 | Sheave blocks for lifting purposes |
| AS 3990-1993 | Mechanical equipment - Steelwork (Reconfirmed 2016) |
| AS/NZS 1427:1996 | ISO metric machine screws |
| AS/NZS 4396:1999 | Connectors - Insulation piercing - For 0.6/1 kV aerial bundled cables |
| HB 132.1-1999 | Structural upgrading of older houses Non-cyclone areas |
| AS/NZS 2857:1996 | Timber drums for insulated electric cables and bare conductors |
| AS 1761-1985 | Helical lock-seam corrugated steel pipes |
| AS 4041-2006 | Pressure piping (Reconfirmed 2016) |
| AS 2638.2-1999 | Sluice valves for waterworks purposes Resilient seated |
| AS 1214-1983 | Hot-dip galvanized coatings on threaded fasteners (ISO metric coarse thread series) |
| AS 4100-1998 | Steel structures (Reconfirmed 2016) |
| AS/NZS 1112:1996 | ISO metric hexagon nuts, including thin nuts, slotted nuts and castle nuts |
| AS/NZS 4677:2000 | Steel utility services poles |
| AS/NZS 4291.2:1995 | Mechanical properties of fasteners Nuts with specified proof load values - Coarse thread |
| AS/NZS 3845:1999 | Road safety barrier systems |
| AS 4398.1-1996 | Insulators - Ceramic or glass - Station post for indoor and outdoor use - Voltages greater than 1000 V a.c. Characteristics (Reconfirmed 2016) |
| AS 2528-1982 | Bolts, studbolts and nuts for flanges and other high and low temperature applications |
| AS 1154.3-1985 | Insulator and conductor fittings for overhead power lines - Performance and general requirements for helical fittings |
| AS 1210-1997 | Pressure vessels |
| AS 3766-1990 | Mechanical fittings for low voltage aerial bundled cables |
| MP 52-2001 | Manual of authorization procedures for plumbing and drainage products |
| AS 3578-1993 | Cast iron non-return valves for general purposes |
| AS 2638.1-1999 | Sluice valves for waterworks purposes Metal seated |
| AS 1576.2-1991 | Scaffolding Couplers and accessories |
| AS/NZS 2041:1998 | Buried corrugated metal structures |
| AS 4794-2001 | Non-return valves for waterworks purposes - Swing check and tilting disc (Reconfirmed 2015) |
| AS/NZS 2280:1999 | Ductile iron pressure pipes and fittings |
| AS 1897-1976 | Electroplated coatings on threaded components (metric coarse series) |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.