• Shopping Cart
    There are no items in your cart

AS/NZS 1516:1994

Current

Current

The latest, up-to-date edition.

The cement mortar lining of pipelines in situ (Reconfirmed 2020)

Available format(s)

Hardcopy , PDF 1 User , PDF 3 Users , PDF 5 Users , PDF 9 Users

Language(s)

English

Published date

15-08-1994

€32.89
Excluding VAT

1 - AS/ NZS 1516:1994 THE CEMENT MORTAR LINING OF PIPELINES IN SITU
4 - PREFACE
5 - CONTENTS
6 - 1 SCOPE
6 - 2 REFERENCED DOCUMENTS
7 - 3 DEFINITIONS
7 - 3.1 Admixture
7 - 3.2 Curing
7 - 3.3 Fitting
7 - 3.4 Internal diameter
7 - 3.5 Laitance
7 - 3.6 Lining
7 - 3.7 Mortar
7 - 3.8 Seal coat
7 - 3.9 Spray application
7 - 4 MATERIALS
7 - 4.1 Aggregates
7 - 4.2 Cement
7 - 4.3 Water
8 - 4.4 Admixtures
8 - 4.5 Cement mortar
8 - 5 PROPORTIONING OF MATERIALS
8 - 5.1 Aggregate:cement ratio
8 - 5.2 Water: cement ratio
8 - 6 MEASUREMENT AND MIXING OF MATERIALS
8 - 7 PREPARATION OF PIPELINE SURFACES
8 - 8 APPLICATION OF MORTAR
8 - 8.1 General
8 - 8.2 Spray application
8 - 8.3 Hand application
8 - 9 TYPE TESTING HAND REPAIR MORTAR
8 - 9.1 General
9 - 9.2 Adhesion to steel and cured mortar
9 - 9.3 Water: cement ratio
9 - 10 THICKNESS OF LINING
9 - 11 SURFACE QUALITY AND WORKMANSHIP
9 - 11.1 General
9 - 11.2 Defects
10 - 11.3 Repairs
10 - 12 CURING
10 - 13 APPLICATION OF SEAL COAT
11 - 14 EFFECT OF CEMENT MORTAR LINING ON WATER QUALITY
11 - 15 INSPECTION
13 - APPENDIX A - PURCHASING GUIDELINES
13 - A1 GENERAL
13 - A2 INFORMATION TO BE SUPPLIED BY THE PURCHASER
13 - A3 MATTERS TO BE DECIDED BY AGREEMENT
13 - A4 INFORMATION TO BE SUPPLIED BY THE CONTRACTOR
14 - APPENDIX B - MEANS FOR DEMONSTRATING COMPLIANCE WITH THIS STANDARD
14 - B1 SCOPE
14 - B2 STATISTICAL SAMPLING
14 - B3 PRODUCT CERTIFICATION
14 - B4 SUPPLIER’S QUALITY SYSTEM
15 - B5 OTHER MEANS OF ASSESSMENT

Specifies the requirements for the cement mortar lining of pipelines in situ, by spray application. The lined pipelines are intended for the conveyance of wastewater or water intended for human consumption.

Committee
WS/9
DocumentType
Standard
ISBN
0 7262 8993 0
Pages
10
ProductNote
Reconfirmed 28/08/2020.
This standard has been reconfirmed in Australia in 2020 and remains current in New Zealand. Reconfirmation Notice 28/08/2020
PublisherName
Standards Australia
Status
Current
Supersedes

This Standard specifies requirements for the cement mortar lining of pipelines in situ, by spray application. The lined pipelines are intended for the conveyance of wastewater or water intended for human consumption.NOTES:1 Guidelines to purchasers on information that should be supplied by the purchaser and those variables that should or may be agreed upon at the time of enquiry or order are given in Appendix A.2 Alternative methods for determining compliance with this Standard are given in Appendix B.

First published in Australia as AS CA49-1968.
Revised and redesignated AS 1516-1973.
Second edition 1980.
Jointly revised and designated as Joint Standard AS/NZS 1516:1994.

AS 3855-1994 Suitability of plumbing and water distribution systems products for contact with potable water
AS 1631-1994 Cast grey and ductile iron non-pressure pipes and fittings (Reconfirmed 2018)
AS 1627.9-1989 Metal finishing - Preparation and pretreatment of surfaces - Pictorial surface preparation standards for painting steel surfaces
AS 3900.1-1987 Quality management and quality assurance Standards Guidelines for selection and use
AS 3799-1998 Liquid membrane-forming curing compounds for concrete (Reconfirmed 2018)
AS 1478-1992 Chemical admixtures for concrete
AS 3904.1-1987 Quality management and quality system elements Guidelines
AS 1281-2001 Cement mortar lining of steel pipes and fittings (Reconfirmed 2018)
AS 3972-1997 Portland and blended cements
AS 1012.3-1983 Methods of testing concrete Methods for the determination of properties related to the consistence of concrete
AS 1627.9-2002 Metal finishing - Preparation and pretreatment of surfaces Pictorial surface preparation standards for painting steel surfaces (Reconfirmed 2017)
AS 1141-1974 Methods for sampling and testing aggregates
AS 1399-1990 Guide to AS 1199 - Sampling procedures and tables for inspection by attributes
AS 1199-1988 Sampling procedures and tables for inspection by attributes
AS 1012.20-1992 Methods of testing concrete Determination of chloride and sulfate in hardened concrete and concrete aggregates
AS/NZS 2544:1995 Grey iron pressure fittings
AS 2758.1-1998 Aggregates and rock for engineering purposes - Concrete aggregates
AS/NZS 3500.0:2003 Plumbing and drainage Glossary of terms
AS 3500.0-1990 National Plumbing and Drainage Code Glossary of terms
HB 18.44-1991 Guidelines for third-party certification and accreditation - Guide 44: General rules for ISO or IEC international third-party certification schemes for products
AS/NZS 2280:2004 Ductile iron pipes and fittings

AS 2118.1:2017 Automatic fire sprinkler systems General systems
AS 2118.9-1995 Automatic fire sprinkler systems Piping support and installation (Reconfirmed 2013)
AS 2118.1-2006 Automatic fire sprinkler systems General systems
AS 4118.2.1-1995 Fire sprinkler systems Piping - General (Reconfirmed 2013)

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.