AS/NZS 1754:1995

1 - AS/NZS 1754:1995 CHILD RESTRAINT SYSTEMS FOR USE IN MOTOR VEHICLES
4 - PREFACE
5 - CONTENTS
7 - SECTION 1 SCOPE AND GENERAL
7 - 1.1 SCOPE
7 - 1.2 OBJECTIVE
7 - 1.3 REFERENCED DOCUMENTS
8 - 1.4 DEFINITIONS
8 - 1.4.1 Accessories
8 - 1.4.2 Actuation surface
8 - 1.4.3 Adjuster
8 - 1.4.4 Airway region
8 - 1.4.5 Anchorage components
8 - 1.4.6 Anchorage point
8 - 1.4.7 Anterior/posterior
8 - 1.4.8 Attachment bolt
8 - 1.4.9 Attachment clip
8 - 1.4.10 Authority
8 - 1.4.11 Booster cushion
8 - 1.4.12 Booster seat
8 - 1.4.13 Chair
8 - 1.4.14 Child restraint
9 - 1.4.15 Converter
9 - 1.4.16 Crotch strap
9 - 1.4.17 Downward
9 - 1.4.18 Enclosing restraint
9 - 1.4.19 Extension strap
9 - 1.4.20 Fabric
9 - 1.4.21 Flame spread time
9 - 1.4.22 Forward
9 - 1.4.23 Genital region
9 - 1.4.24 Harness
9 - 1.4.25 Leg straps
9 - 1.4.26 Means of adjustment
9 - 1.4.27 Pelvic area
9 - 1.4.28 Posterior/anterior
9 - 1.4.29 Quick-release device
9 - 1.4.30 Rearward
9 - 1.4.31 Rigid component
9 - 1.4.32 Roping
9 - 1.4.33 Securing device
9 - 1.4.34 Set screw
9 - 1.4.35 Shall
9 - 1.4.36 Should
10 - 1.4.37 Strap
10 - 1.4.38 Submarining
10 - 1.4.39 Surface burning time
10 - 1.4.40 Swing ticket
10 - 1.4.41 Tilt-lock adjustment device
10 - 1.4.42 Transversely installed
10 - 1.4.43 Trims
10 - 1.4.44 Upper anchorage strap
10 - 1.4.45 Upper anchor fitting
10 - 1.4.46 Upward
10 - 1.5 TYPE DESIGNATION
12 - SECTION 2 MATERIAL REQUIREMENTS
12 - 2.1 WEBBING
12 - 2.2 NET
12 - 2.3 METAL PARTS OR COATED METAL PARTS
12 - 2.4 FLAMMABILITY
12 - 2.4.1 Fabrics and padding materials
13 - 2.4.2 Other chair materials
13 - 2.5 TOXICITY
13 - 2.6 PLASTICS STABILIZATION
14 - SECTION 3 DESIGN AND CONSTRUCTION
14 - 3.1 EXTENT OF PROTECTION
14 - 3.2 RESTRAINT SYSTEM
14 - 3.2.1 General
15 - 3.2.2 Type A1 child restraints
15 - 3.2.3 Type A2 child restraints
16 - 3.2.4 Type B child restraints
20 - 3.2.5 Type C child restraints
20 - 3.2.6 Type D child restraints
20 - 3.2.7 Type E child restraints
22 - 3.3 SECURING DEVICE
22 - 3.4 QUICK-RELEASE DEVICE
22 - 3.4.1 General
24 - 3.4.2 Type A1, Type B and Type D child restraints
24 - 3.5 ANCHORING AND ATTACHMENT SYSTEM
24 - 3.5.1 Provision of anchoring system
25 - 3.5.2 Requirements for the anchorage components
30 - 3.6 RIGID COMPONENTS
30 - 3.7 ACCESSORIES
30 - 3.7.1 General
30 - 3.7.2 Removable liners and covers
30 - 3.8 ADJUSTERS
30 - 3.9 CORROSION PROTECTION OF METAL PARTS
30 - 3.10 DURABILITY OF COMPONENTS
31 - 3.11 WORKMANSHIP AND FINISH
31 - 3.11.1 General
31 - 3.11.2 Hazardous sharp edges and hazardous sharp points
31 - 3.11.3 Ingestion or inhalation hazards
31 - 3.11.4 Projections
31 - 3.12 CHILD RESTRAINTS DESIGNED FOR CHILDREN WITH DISABILITIES
32 - SECTION 4 PERFORMANCE
32 - 4.1 GENERAL
32 - 4.2 HAZARDOUS THROAT CONTACT IN ABNORMAL SITUATIONS
32 - 4.3 DYNAMIC PERFORMANCE OF THE CHILD RESTRAINT
32 - 4.3.1 General
32 - 4.3.2 Type A1 child restraints
32 - 4.3.3 Type A2 child restraints
32 - 4.3.4 Type B child restraints
33 - 4.3.5 Type D child restraints
33 - 4.3.6 Type E child restraints
33 - 4.4 DYNAMIC PERFORMANCE OF UPPER ANCHORAGE COMPONENTS
34 - SECTION 5 TESTING
34 - 5.1 RECLINING CHILD RESTRAINTS
34 - 5.2 TEST DUMMIES
34 - 5.2.1 General
34 - 5.2.2 Test dummies for dynamic testing
34 - 5.3 CALIBRATION OF TNO TEST DUMMIES
34 - 5.4 CHILD RESTRAINT TEST SPECIMEN
36 - SECTION 6 INFORMATIVE LABELLING, INSTRUCTIONS, MARKING AND PACKAGING
36 - 6.1 SCOPE
36 - 6.2 GENERAL
36 - 6.2.1 Packaging
36 - 6.2.2 Language
36 - 6.2.3 Print size
36 - 6.2.4 Illustrations
36 - 6.2.5 Durability of marking
36 - 6.2.6 Adhesion of labels
37 - 6.2.7 Use of product name
37 - 6.3 INFORMATION TO BE SUPPLIED ON PACKAGING
38 - 6.4 INFORMATION TO BE SUPPLIED IN AN INSTRUCTION BOOKLET OR SHEET
38 - 6.4.1 General information
38 - 6.4.2 Instructions for installation
38 - 6.4.3 Instructions for use
38 - 6.4.4 Instructions for maintenance
39 - 6.5 INFORMATION TO BE SUPPLIED ON A SWING TICKET OR LABEL
39 - 6.6 MARKING
41 - APPENDIX A - CLOTHING FOR TEST DUMMIES
42 - APPENDIX B - SPACERS FOR ATTACHMENT TO TEST DUMMIES
43 - APPENDIX C - INSTRUCTIONS TO BE SUPPLIED FOR INSTALLATION OF THE UPPER ANCHORAGE FITTINGS
43 - C1 SCOPE
43 - C2 INFORMATION TO BE SUPPLIED

Specifies general requirements for all types of restraining devices for child occupants of passenger cars and their derivatives.

This Standard specifies requirements for restraining devices for child occupants of passenger cars and their derivatives, such devices being intended when properly selected, correctly installed and correctly adjusted, to reduce the risk of bodily injury in a vehicle impact. The devices may also have application to other types of vehicles.NOTE: This Standard does not cover child restraints which are an integrated feature of a motor vehicle.1.1 SCOPE This Standard specifies requirements for restraining devices for child occupants of passenger cars and their derivatives, such devices being intended when properly selected, correctly installed and correctly adjusted, to reduce the risk of bodily injury in a vehicle impact. The devices may also have application to other types of vehicles.NOTE: This Standard does not cover child restraints which are an integrated feature of a motor vehicle.

First published in Australia as part of AS E46-1970.
Revised and redesignated AS 1754-1975.
Revised and redesignated in part as AS 1754.1-1989, AS 1754.2-1989 and AS 1754.4-1989.
AS 1754-1975 made Obsolescent 1991.
AS 1754.1-1989, AS 1754.2-1989, and AS 1754.4-1989 revised, amalgamated and redesignated AS 1754-1991.
AS 1754-1975 withdrawn April 1993.
First published in New Zealand as NZS 5411:1973.
Second edition 1982.
Third edition 1991.
AS 1754-1991 and NZS 5411:1991, jointly revised and designated AS/NZS 1754:1995.